Construction of Henan Zhengzhou Integrated Prefabricated Pump Station
The rainwater integrated prefabricated pump station is well coordinated with the surrounding environment
Rainwater integrated prefabricated pump station It is an integrated product integrating submersible pump, pump station equipment, decontamination grid equipment, control system and remote control system. The water pump is installed in an auto coupled wet type. The pump room and inlet well are integrated in the same shaft, with an internal maintenance platform and ground control panel. It requires simple operation and maintenance, pre assembly and factory test before transportation, so as to minimize the on-site installation time and improve the system reliability.
The integrated pump station adopts the method of prefabrication on demand. It is prefabricated completely according to the customer's requirements, as well as the engineer's on-site survey and measurement results. The integrated pump station is customized to meet the customer's needs. After the installation and commissioning of internal equipment such as water pump, valve pipeline, sensor device and intelligent control system, they are transported to the project site and directly hoisted at the site, effectively solving various problems in the construction and operation of the pump station.
The integrated prefabricated pump station system is highly integrated and occupies a small area. It is easy to coordinate with the surrounding environment. It is buried under the ground, and the exposed surface is like an ordinary sewage inspection well, which can be well coordinated with the surrounding environment.
The impact on the surrounding environment is small. After the integrated pump station is buried underground, it will not emit odor, and the impact on the environment is small. Reduce unnecessary troubles caused by environmental problems in the future.
Integrated sewage lift pump station How to deal with faults
Integrated sewage lift pump station When there is a fault, do not use and operate continuously. The effective way is to stop the equipment and check it in detail. The fault will be terminated and the operation can be ensured.
After that, it is necessary to repair the fault point in time. If the fault location is improved in detail, it will avoid the occurrence of another fault. If very detailed maintenance is carried out according to the fault location .
This can effectively troubleshoot and solve the problem, but it is easy to ignore this, so you should pay more attention in the future use process.
To sum up, we want to Integrated sewage lift pump station To deal with them well after a fault occurs, it is necessary to stop them and carry out targeted and detailed fault maintenance.
Integrated sewage lift pump station How it works
1、 Integrated sewage lift pump station How to operate? Before use, check all aspects of the equipment to ensure that it is normal before putting it into use. Note that the balance of the equipment needs to be tested before use. The tester can detect the balance of the FRP equipment .
2. The first is the pulling layer of glass fiber yarn, the second is the pouring cap of resin, and then it is operated repeatedly for several times. During the operation, it needs to be squeezed, and then the hot water valve can be opened to allow it to be heated and solidified.
3. When the solidification reaches a certain standard, the valve of the lifting platform can be opened and the glass fiber reinforced plastic grating plate can be taken out. During the manufacturing process, the replacement will cause pollution to the equipment, so the glass fiber reinforced plastic equipment needs to be maintained regularly to maintain its ability to work continuously.
