Laminated glass
Also called sandwich glass 。 Gluing Glass Two or more pieces Float glass Reinforced PVB sandwiched in the middle（ ethylene Polymer butyrate) adhesive film is pressed by a hot press and discharged as much as possible from the middle air, and then put into a high-pressure steam kettle to dissolve a small amount of residual air into the adhesive film under high temperature and pressure. High safety. Because the adhesive film of the middle layer is tough and has strong adhesion, it is not easy to penetrate after being damaged by impact, and the debris will not fall off, and it is tightly bonded with the adhesive film. Compared with other glasses, it has the properties of shock resistance, anti-theft, bullet proof and explosion-proof.
Tempered laminated glass
Toughened laminated glass refers to further safety treatment after glass tempering to bond two pieces of glass together. After the glass is broken, it will not splash and hurt people, playing a safety role.
The laminated glass has high safety. Because the adhesive film of the middle layer is tough and has strong adhesion, it is not easy to penetrate after being damaged by impact, and the fragments will not fall off, and it is tightly bonded with the cornea.
Compared with other glasses, it has the properties of shock resistance, anti-theft, bullet proof and explosion-proof.
Energy saving. The intermediate film can reduce the solar radiation, prevent the loss of energy springs, and save the power consumption of air conditioners. The intermediate film can buffer the sound wave vibration products to achieve sound insulation.
The intermediate film can block 99% of the ultraviolet rays and delay the fading of indoor furniture and curtains.
Increase the appearance and beauty of buildings.
Toughened laminated glass process
Laminated glass is made of two or more pieces of float glass sandwiched with a strong PVB (ethylene polymer butyrate) adhesive film, which is pressed by a hot press and discharged as much as possible from the middle air, and then put into a high-pressure steam kettle to dissolve a small amount of residual air into the adhesive film under high temperature and pressure. Or the eva adhesive film is sandwiched in the middle. After high temperature vacuum pumping, the two pieces of glass are firmly bonded together. Eva laminated one-step molding, short time, easy to operate. Arc shaped lamination is formed in one step.
There is also a kind of wet lamination, that is, glue pouring. This kind of method is simple in technology, and its production is affected by the weather. It is easy to yellowing and degumming after a long time.
Contact: Manager Su Tel.:***
