Supply the chip deoiler manufacturer pin
Metal dryer is also called metal deoiler. Metal dryer is an ideal equipment for removing cutting chips with high humidity. It is often used to separate chips with high oil content. Through this equipment, the chips can be quickly dried and purified to achieve solid-liquid separation. The equipment greatly shortens the time for chip drying, removes the oil stains attached to the chip surface as soon as possible, and provides convenience for the subsequent processing of chips. It is especially suitable for drying chips after machining by lathes, milling machines and other equipment
one point two Scope of use:
All kinds of pig iron chips, aluminum chips, copper chips and other metal chips
Applicable chip size: 1mm - 30mm
three-phase electric machinery The belt drives the rotor, and the rotation speed of the dryer can reach 960r/min. Under the condition of high-speed operation, the oil attached to the cutting chips is subjected to a strong centrifugal force, thus separating the chips. The mesh is carefully and scientifically designed by our company, blocking the chips in the mesh, throwing the oil out of the mesh, dropping the oil into the oil chamber, discharging the equipment from the oil outlet, and the chips in the container The bottom hydraulic assembly starts to eject the chips out of the inner cylinder and out of the equipment. Because the chip diameter is relatively small, it may be accumulated on the support plate as the oil passes through the mesh. If it is not removed in time, it will accumulate more and more. Therefore, our company has designed a flushing pipeline. After the flushing port is connected, the flushing pipeline will flush the chips on the support plate clean, realizing continuous and automatic operation. This machine has many advantages, such as large single feeding, clean chip ejection, complete solid-liquid separation, etc door Designed, firm and durable, easy to operate, safe and reliable, it is the ideal equipment for drying chips.