ours Waterproof glue Membrane construction is the material used in the swimming pool, so when we install it, we need to pay attention to details in order to achieve aesthetics and waterproof. The general details are as follows:
Detail 1: Selection of process
Friends outside the industry may not know that there are many processes for the construction of waterproof adhesive film, but what is more safe is the full scraping adhesive lap hot melt welding process, that is, before laying the swimming pool adhesive film, the bottom and wall of the pool are evenly scraped and coated with two-component adhesive of auxiliary materials, so that the adhesive film can stick to the pool body to achieve stability, and the swimming pool adhesive film is not easy to deform in later use, Waterproof and firmer.
Detail 2: Site flatness
This is mainly related to the swimming pool plastic film itself, because it is a PVC coiled material with soft texture. If the foundation is uneven, it will be affected by the water pressure after installation and used by water injection, resulting in the same shape as the foundation surface. Therefore, before the construction of waterproof plastic film, the site must reach the flatness, so that it will be more beautiful.
Detail 3: Site dryness
This is mainly related to the auxiliary materials of waterproof adhesive film. During the construction process, adhesive glue is required, and the adhesive glue can reach the corresponding viscosity only at a certain temperature and a certain dryness of the foundation surface, so that the adhesive film can stick to the pool body.
Therefore, we must pay attention to the above three details during the construction of waterproof adhesive film, so that the adhesive film can be both beautiful and waterproof, and its service life will be longer. This is relatively more complicated. Friends who have been swimming pool operators should be worried about this problem, ceramic tile Mosaic The swimming pool is not good, but most of these swimming pools will appear this phenomenon after two years of use. It is troublesome to repair here and there, and sometimes there will be incidents of scratching tourists if they are not handled in time.
Swimming pool tile scratches tourists
In case of such problems, compensation for losses is a sure thing, and compensation is a secondary problem. The major problem is that there is a potential safety hazard in the swimming pool. Even if it is handled later, the reputation of the swimming pool operator will certainly be lost and customers will be lost.
Is there any way to avoid the scratch of swimming pool tile on tourists? Answer: Yes
Method 1: send a safety officer to regularly patrol and eliminate potential safety hazards in a timely manner. Set up a stop zone for mosaics and tiles falling off, and make repairs when tourists leave the site and operate in the off-season. However, this method does not cure the symptoms, and the tiles may not be the next area.
Method 2: The upper layer of tile is installed with swimming pool glue film, which is a waterproof lining material that can be directly installed on tiles and mosaics. The swimming pool glue film is installed as a whole, PVC The material is soft and will not fall off due to the large temperature difference between expansion and contraction, nor will it scratch tourists. The disadvantage of this method is that it has to close the business to empty the water body of the swimming pool. Fortunately, the overall installation speed of the swimming pool membrane is fast and the construction period is short. If the swimming pool is seriously damaged, this kind of method needs to stop business immediately for repair. At this time, the use of the swimming pool membrane can shorten the construction period and start business as soon as possible. Take the 1000 square swimming pool as an example, the construction period is 7 to 10 days. If the swimming pool can barely be operated, pay more attention to the safety problems, and then transform it in the off-season. The swimming pool lining material is used for decoration and waterproofing. The traditional lining is ceramic tiles and mosaics, which should have been exposed to by everyone. After a long time of use, there will be incidents of tourists being scratched due to the falling of ceramic tiles. The adult swimming pool is good for everyone to pay attention to, but most of the water parks are children playing, and children are naughty. If there is an incident of children being scratched, it will be a big trouble. However, the lining material of the swimming pool plastic film is soft, and the overall pavement will not fall off. Scratches can be avoided and the safety of the water park can be improved.
How is the swimming pool plastic film used?
1. The swimming pool plastic film is spread on the site for more than 2 hours to restore the memory of the material, and the temperature is consistent with the construction site.
2. Clean the site.
3. When the swimming pool glue film is laid, overlapping welding shall be adopted for the lap joint of two materials, which is generally required to overlap 5cm.
4. Then put away the swimming pool glue film, and use the matched water-based special adhesive glue to evenly scrape the ground.
5. After the glue dries for half an hour, lay the cut swimming pool glue film.
6. After pasting the adhesive film, push the surface with a cork block to level it and squeeze out air.
7. Then use professional welding gun tools for defense welding, and use plastic pressure wheel for compaction and sealing.
8. The excess glue on the surface of the swimming pool glue film should be wiped off in time.
9. After 24 hours, water can be injected for use.
In addition, attention should be paid to the use of swimming pool plastic film for maintenance:
1. The swimming pool plastic film belongs to elastic polychlorinated polymer ethylene PVC material, it is strictly prohibited to stab with sharp objects, such as scissors, angle iron, etc;
2. Do not use sharp cleaning tools such as steel wire balls to clean the plastic film pool of the swimming pool;
3. The bottom of the pool can be cleaned with a hard brush and a small amount of detergent;
4. In winter, in order to better protect the adhesive film, prevent accelerated weathering and affect the service life, water can be injected at the bottom of the pool (the amount of water injected should be full of the pool bottom);
5. Use disinfectant or disinfectant tablet before other After diluting in the container, evenly sprinkle it onto the pool surface.
