1、 PVC material, coiled material, soft, similar to PVC coiled material floor Because of different production processes, there are substantial differences between the two;
2. Specification: 25m long and 1.83m wide; Thickness: 1.5mm;
It is made of PVC, so what is PVC?
PVC Immediate polychlorination ethylene Polyvinyl Chloride (PVC for short) is a vinyl polymer, and its material is an amorphous material. PVC materials are often used as stabilizers, lubricants, auxiliary processing agents, colorants, impact agents and other additives in practical applications. They are nonflammable, highly resistant, climate resistant and have good stability. PVC has strong resistance to * * *, reducing agent and strong acid, and is the better type in China and the second largest universal type in the world synthetic resin Material Science. At present, PVC has become one of the widely used plastic varieties, widely used in industry, construction, agriculture, daily life, packaging, power, utilities and other fields.
1. Clean the swimming pool site and clean the floor. If there is any uneven and wet area, handle it. When paving the swimming pool membrane, it is not necessary to repeat the internal waterproofing. The first thing is to keep the ground flat and dry.
2. After entering the construction site, the swimming pool plastic film shall witness the sampling re inspection, entrust the preparation with testing qualification to test according to the standard, and can be used only after passing the inspection; Cut and paste the swimming pool adhesive film according to the accurate area of the drawing. All the pictures of the swimming pool adhesive film cutting and pasting are complete. The swimming pool adhesive film cannot have any deviation. Carefully check with the drawing.
Traditional ceramic tile Mosaic The paving cycle is long, which requires a lot of manpower and material resources. Once encountering complex structures, their shortcomings will appear, and the process is very cumbersome. In order to achieve the ideal effect when maintenance is needed in the future, it is often not necessary to repair problems wherever they appear, but to repair a large area around them, which is very inconvenient.
The adhesive film of Xingfeng swimming pool can be installed only by using a special adhesive. In order to avoid cracks on the surface of the joint, in order to obtain a good internal and external effect, the cold or hot welding joint can be strengthened with sealant, and it looks like a whole. Because the plastic film of Xingfeng swimming pool is soft, no matter what the structure and shape of the swimming pool, it can be easily constructed, which is particularly convenient.
Advantage 3: good application performance
Traditional ceramic tiles and mosaics, because of their special raw materials, simply breed bacteria themselves. In addition, there are many joints, which have become a good place for them to breed bacteria and microorganisms. Together, they also pollute the pool water, bringing health risks to swimmers.
The raw materials of Xingfeng swimming pool plastic film are not easy to reproduce bacteria, with strong anti fouling ability, high elasticity, simple protection, and no need to release water in winter. The waterproof decorative adhesive film of Xingfeng Swimming Pool is a whole structure. With the natural pressure of water, it will not fall off, and it does not need to be repaired and protected later. The service life of Xingfeng swimming pool plastic film is more than ten years, which greatly reduces the burden of operators.
3. After the swimming pool glue film material is paved, all the glue shall be scraped, and professional waterproof glue for the swimming pool glue film must be used.
4. Snap line, pre lay, cut, lay alignment, press film or spot weld shaping, scrub dust, weld test, start to paste swimming pool adhesive film, and carry out hot melt welding with the lap width of 50cm between swimming pool adhesive films.
5. The construction master of the swimming pool shall adopt different edge closing methods according to different structures.
6. After the welding is completed, check again. If the welding is not in place, weld from the beginning.
What about the swimming pool plastic film?
Swimming pool plastic film, which is called PVC film professionally, is a new material developed for waterproof and decorative use of swimming pool. It is a coiled material made of synthetic resin as the primary raw material and professional additives, stabilizers, etc. Its products are corrosion resistant and chlorine resistant. It can be laid on the bottom and wall of the swimming pool for waterproofing and exterior decoration of the swimming pool, and no other decorative materials are needed. The price of waterproof membrane materials is also relatively clear in the market now, which ranges from tens of yuan, while the domestic market also has imported waterproof membrane materials, which are relatively high, about hundreds of yuan per square meter. The unit price of waterproof adhesive film material is mainly related to its own thickness and drawing patterns, but it is about a few yuan per square meter. The price of Xingfeng waterproof membrane is 45 yuan per square meter. Advantages of swimming pool plastic film:
1. Compared with traditional ceramic tiles and mosaics, picture adhesive film is a closed decorative structure, which plays an internal waterproof role. 2. The waterproof adhesive film of the picture is a whole structure. With the natural pressure of water, it does not simply fall off. In the later stage, it does not need to be repaired and protected. However, traditional tiles and mosaics are easy to fall off and are not convenient to repair. 3. The equipment of waterproof film for drawings is coiled material welding, with fewer joints, which is not easy to hide dirt. 4. The waterproof adhesive film is made of * * * material, which is not easy to attach dirt and is easier to clean. 5. The service life of waterproof picture adhesive film is up to 10 years, while the traditional ceramic tile, mosaic and other decoration methods need to be innovated every 2 or 3 years.
The swimming pool plastic film is different from the previous materials. The original swimming pool materials need the cooperation of waterproof and decorative materials. If only waterproof materials are used, swimming pool bricks need to be used for decoration; Assuming that the swimming pool bricks alone can not achieve the function of waterproof. The waterproof adhesive film can solve the problem of waterproof and decoration at one time. It has waterproof and decorative properties, and is attributed to the pvc coiled material. The raw materials are soft, easy to transport, and not easy to damage.
The reason why it is not necessary to smash the swimming pool bricks when upgrading the old swimming pool is that the waterproof adhesive film can be directly installed on the swimming pool brick surface. In addition to the swimming pool brick surface foundation, it can also be laid on the cement surface and steel plate surface, which is simple and convenient. In addition to these unique advantages, the waterproof adhesive film also has the functions of preventing direct light, resisting high temperature and low temperature. It can be used outdoors for a long time without peeling and cracking, and can remove the downwind of ceramic tiles.
