Resin tile product characteristics;
I synthetic resin Watt energy saving and sound insulation
The thermal conductivity of resin tile is 0.325w/m.k, about clay 1/3 of tile, 10mm thick Cement tile 1/5 of, 0.5mm thick color steel tile 1/2000 of. Without considering the addition of thermal insulation layer, the thermal insulation performance of tile can still reach a better level. The experiment of phoneme measurement shows that tile can absorb noise well when exposed to external influences such as rainstorm, hail and strong wind.
2、 Good impact resistance and low temperature resistance
The steel ball weighing 1kg falls freely on the tile surface from a height of 1.5m without cracks. After 10 freezing cycles, the tile is free of hollowing, bubbles, peeling and cracks.
3、 Good color
The synthetic resin tile can maintain its color stability even if it is exposed to ultraviolet light, moisture, heat, cold and impact for a long time. It passed the 12000 hour artificial aging test conducted by the National Chemical Building Materials Test Center, and the test result △ E=3.86.
4、 Superior load resistance of synthetic resin tile
Tested by the National Chemical Building Materials and Component Quality Supervision Station, the product was not damaged when the support interval was 750mm and the weight was 150kg.
5、 Superior self waterproof performance
The high weather resistance resin selected for synthetic resin tile is dense and does not absorb water, so there is no problem of micropore water seepage. The single sheet area of synthetic resin tile is large, the roof joints are few, and the lap joint is tight, which can eliminate the waterproof layer.
6、 Light weight
Synthetic resin tile weighs 6.1kg per square meter, which is a lightweight material. There is no need to install too many steel structures wall The foundation bearing requirement is small.
7、 Self-cleaning
The product itself is not suitable for absorbing dust. Once washed by rain, it will be as clean as new, and will not be mottled after being washed by scale.
8、 Good corrosion resistance
The product can resist the corrosion of acid, alkali, salt and other chemicals for a long time, and will not be corroded by rain and snow, resulting in performance degradation.
9、 Strong fire resistance
The main resin of this product is a fire-resistant product, and its fire-proof performance has reached B1 level after being tested by the national fire protection authority.
10、 Volume stability
The expansion coefficient of synthetic resin tile is 4.93 × 10-5 (1/℃), and it has biaxial tensile property in geometric design. Even if the temperature changes greatly, the expansion and contraction of the tile can be digested by itself, ensuring the stability of the geometric dimension of the tile.
11、 Insulation
Another technical feature of this product is that it is non-conductive and will be intact in case of accidental discharge.
12、 Simple installation
The product only needs to be fixed on the steel sandalwood with screws, supplemented by the main ridge, diagonal ridge and other accessories, and can be durable with a service life of more than 20 years.
