Common sense of roots blower maintenance

Zhang Liangchen of Chunlin Machinery explains how to use it Roots blower Use this note:

Roots blower Maintenance:

Newly purchased Roots blower Pay attention to the levelness of the cement floor during installation. Irregular ground will affect normal operation . When installing new equipment, be sure to check the tightness of the V-belt. When adding lubricating oil into the oil tank, be sure to see the oil float in front of the oil tank for filling. If you add more, it is easy to spray oil outside, and if you add less, it will affect the lubrication of gears inside the equipment.

The lubricating oil of the new equipment shall be replaced once a week after use, and it must be replaced once a week in the previous month. This is the running in period. The running in period is one month. After one month, as long as there is no shortage of oil, the lubricating oil shall be replaced once a month, or 1-2 It can be replaced every month, which can increase the service life of the equipment.

Check the tightness of the V-belt and the oil level of the lubricating oil after the equipment works every day.

Generally, the daily working hours of each equipment are 8-10 The wearing parts, such as V-belt, can be replaced during annual maintenance. If the V-belt is not replaced for a long time, it will easily slip, reduce the working efficiency and fail to achieve the desired effect.

When purchasing lubricating oil, you must strictly follow the specifications and models in the manual. Generally N220 # heavy load lubricating oil, it is recommended to buy it from the fan manufacturer, so that you can not buy it wrong, and you can rest assured of the second use.

The service life of bearing, gear, oil float and shaft sleeve wearing parts is 2-3 It is suggested that replacement should be considered during the maintenance in the second year, so as not to affect the normal operation. When replacing vulnerable parts, the manufacturer's personnel can be contacted to assist in the work. Without knowing many technical problems during the installation process, it is included in the dynamic balance of impellers, clearance adjustment between impellers, etc.