Stainless steel sculpture is a common urban sculpture. Stainless steel is resistant to weak corrosive media such as air, steam and water and chemical corrosive media such as acid, alkali and salt. Because stainless steel sculptures have many advantages, many urban sculptures are made of stainless steel.
Manufacturing process
one ）Make clay sculpture sketch
two ）Enlarge the small draft equally
three ）Turn the clay manuscript into a hard material mold
four ）Forged into stainless steel sculpture according to the model
five ）Polish the sculpture several times
six ）Sculpture surface is sprayed with material paint
texture of material
201# stainless steel
304# stainless steel
316# stainless steel
In coastal cities, due to the problem of air salinity, it is recommended to use 304# 。
thickness
The thickness of stainless steel sculpture is generally 1.5mm ， 2.0mm,3.0mm 。 board The thicker it is, the harder it is to shape and the higher the price is.
install
Generally, it is welded firmly, that is, the skeleton of the sculpture itself is welded with the embedded iron on the base, and the rebar is welded under the embedded iron. The length of the rebar and the size of the embedded iron are determined according to the size of the sculpture. For the sake of beauty, the base is usually pasted after the installation of sculpture Marble perhaps Granite board.
advantage
one 、 surface treatment : The stainless steel sculpture itself is silvery white with luster. You can also use different colors on the sculpture as required, generally Automotive paint 。 two Use: This product is suitable for outdoor and indoor places such as parks, botanical gardens, gardens, residential areas, squares, shopping malls, hotels, hotels, and guild halls.
three Advantages of stainless steel: it is not easy to rust, easy to clean, strong wind resistance, durable, and has become the mainstream of modern urban sculpture.
maintain
Stainless steel sculptures should be cleaned regularly , And put it in a dry environment for protection. It is better to wear gloves when holding with hands to prevent salt corrosion in sweat on hands. If the dirt on the stainless steel sculpture is too heavy, first blow it with a cold air dryer. Then use a straw brush to clean, and then use a soft brush to finish. Never use metal polish, water or any other solvent. That will fade the copper. We can wet the cotton ball with saliva and wipe it along the crack from head to tail to avoid omission. Once a year, the thin layer of microcrystalline wax on the copper ware is the colorless wax.
