Supply 860/910 double glazed tile machine

fully automatic double-deck Glazed tile Tile press Technical parameters:
860-910 glazed tile double-layer tile pressing machine. This machine can be divided into three models: 860, 900 and 860 glazed tile models
Length × width × height: 6500 × 1300 × 1300,
Material for large frame: 250H steel
Shaping shaft: diameter 70mm, 45 # quenching and tempering
Forming wheel: material 45 # forging and hard chrome plating
Transmission mode: chain wheel, chain
electric machinery ：3KW
Number of forming rows: 860-11 rows, 910-9 rows of pressed type
Full automatic computer fixed length cutting system: PLC Frequency converter Computer control
pump Station motor: 3KW four level
Shearing die: Gr12
Forming speed: 8-10m/min
Pressing thickness: 0.2-0.7mm
Pressing width: 1000mm

Debugging method of double-layer tile press:
1. First, the height of the four corners of the front and rear rows of the tile press from the big frame to the upper end of the shaft shall be the same, then from the front row to the lower row, find a line to straighten, check whether the lower shaft is in a straight line, and adjust the left and right sides of the lower shaft to be horizontal.
2. Center the tile press against the front row and the rear row, fasten the lock nuts on both sides, pull a straight line in front of and behind the center of the intermediate wheel, and adjust the clearance between the upper and lower shafts, then adjust the machine along the straight line.
3. The adjustment method for the deviation of the pressing plate of the tile press, such as the plate running to the right, padding the left corner (feeding rack), or falling to the right bottom (the number of shaft deviation falls to the number of shaft bottom, and the upper shaft falls with the bottom shaft