Specification of XW-L HOYA aluminum gusset plate Sound absorption gusset plate Fire prevention Acoustic panel
Specification of HOYA aluminum gusset plate: generally, the bottom width is 20-400mm, the height is 20-600mm, and the thickness is 0.4-3.5mm.
Punching type: multiple models and patterns can be selected;
Manufacturing process: molding Aluminum profile 。
surface treatment : Electrostatic powder spraying, coating thickness 0.06-0.1mm, multiple standard colors, which can meet the color design requirements
Note: The length is customized within 6 meters, and the special size can be customized according to the specific situation. Unit (mm)
Basic construction knowledge of aluminum gusset plate
1. Firstly, during the installation, the horizontal line and vertical and horizontal lines should be adjusted according to the actual needs. Here, infrared instruments are used.
2. Proper ceiling height shall be designed and installed keel Generally, the ceiling height is set within the range of 0.8-1.5m. When fixing the suspender, the keel frame should be evenly distributed.
3. When fixing the suspender to be installed on the keel frame, the skeleton of the wood grain aluminum square tube shall be fixed below the main skeleton. Generally, the skeleton of the aluminum square tube shall be kept at a height of about 1m. After the installation of the skeleton, the horizontal adjustment shall be made.
4. After the fastener is installed on the keel and the buckle is pressed down, the distance between the two ends of the aluminum square tube needs to be controlled at about 1-2 cm so that it can be moved and adjusted later.
5. When installing the aluminum gusset plate, you should wear gloves, so that finger marks and dirt will not be left during installation. If there are stains, you can wipe them with appropriate detergent and water to clean them.
