Contact Dai Li 19110524835
This product is highly imported acrylic resin It is combined with high grade pigments through fine grinding processing. Applicable scope: various metal spraying surfaces, metal spraying surfaces, metal surfaces, metal baking surfaces ceramics 、 Stone Silk screen printing and pad printing of electroplated (water containing electroplating), anodized aluminum oxide surface, electrostatic spray paint surface and paint baking surface are not required curing agent Good adhesion can be obtained without baking.
2. Product characteristics: flat, good adhesion, good leveling, strong hardness, alcohol resistance, stamping resistance, scratch resistance, and chemical resistance.
3、 diluent : It is recommended to use the special thinner provided by our company to open oil.
4. Curing agent: This product does not need to add curing agent, and do not add an incompatible curing agent, which will affect its effect
5. Ink mixing method: when mixing, add about 10% diluent to dilute it to the suitable viscosity for printing.
6. Drying time: the drying time of the thermostatic meter is 5-10 minutes, and the dry time is within 24 hours. After 48 hours, the performance is better. The oven is baked at 80 ℃ for 15 minutes, and the performance is better. Winter depends on the region.
7. Service life: one year, please discard after expiration. The residual ink with other additives cannot be recycled.
[Precautions for Ink Use]
1. The batch production can be carried out after the trial printing is confirmed to meet the requirements.
2. Do a good job of removing grease and impurities on the surface of the printed matter to promote the adhesion effect.
3. Adhesion, hardness, acid resistance, alcohol resistance, chemical resistance, scratch resistance, abrasion resistance and other properties shall be tested after full curing.
4. Without permission, this series of inks shall not be mixed and matched with other types of inks.
5. Screen printing with appropriate amount of wiredrawing paste is more suitable for smooth printing process with our company's super slow drying diluent.
[Ink performance test results]
1. 3M adhesive tape sticks to the surface of the ink with a hundred grids at a 45 degree angle and quickly pulls up without degreasing.
2. 500 G alcohol with purity of 99% can wipe back and forth on the ink surface for 100 times without decolorization.
[Safety Rules for Ink Use]
1. Smoking and fire are prohibited when using and storing ink and diluent
2. Pay attention to the good ventilation condition of the construction site during use.
3. Try to avoid direct contact with the surface.
4. If the product accidentally splashes into the mouth, nose, eyes and ears, wash it with plenty of water or ask a doctor directly.
5. Those who are allergic to this product should apply a layer of external skin care cream or wear impermeable gloves before use.
6. Pay attention to the humidity of the workshop. Excessive humidity will affect the adhesion, and high temperature is easy to block the net.
Brand: but MY product name: one from a dry metal INK Numbers: 6486694
1, the product is produced with advanced import acrylic resin and senior pigment after fine grinding system combination to, suitable scope: all kinds of metal coating surface, metal paint surface. The metal surface. Metal paint surface. Ceramic, stone, electroplating (water cut electroplating), anodic alumina surface, electrostatic spray paint surface and paint surface and so on products of screen and pad printing, not needing curing agent, and does not need to bake, can obtain excellent adhesion.
2, the product characteristics: good, adhesion, classification includs glass flow ping sex good, strong hardness, resistance to alcohol resistance, stamping, resistance to scratch, resistance to chemicals.
3, thinner: this company recommended supporting special thinner, open oil.
4, curing agent: this product need not add curing agent, do not add do not supporting the curing agent, it will affect its effect
5, printing ink allocation methods: first when stirred with thinner 10% dilution to printing for viscosity.
6, dry time: constant temperature dry time table natural volatilize 5-10 minutes, action in time within 24 hours, after 48 hours of the best performance, preheat the oven to 80 ℃ bake 15 minutes more optimal performance. Winter varies from area to area.
7, use period: a year, overdue please cut up, add the other additives surplus ink not recycling.
【 precautions 】 use ink
1, ShiYin confirmed again after meet the requirements of production.
2, ready to print the surface of things clear grease and impurities work to promote adhesion effect.
3 and adhesion, hardness, resistance, resistance to alcoholic acid resistance, chemical resistance character, anti-damage, wear resistance performance testing, all need to solidify rear can test.
4, without their permission, may not use the ink series with other kinds of printing ink mix and match colors.
5, screen printing and an appropriate amount of cream with the companys drawing slow dry thinners is more suitable for printing process smoothly.
【 ink performance test results 】
1, 3 M stuck in the picture has the tapes ink surface 45 degree Angle quickly pull up not to take off oil.
2 and purity, 99% alcohol 500 G force in ink surface wipe 100 times back and forth without decoloring.
【 ink use safety rules 】
1, printing ink, thinner, use and storage are prohibited during the fireworks
2, when using note the construction site of the ventilation in good condition.
3, try to avoid direct contact with the skin.
4, this product he splashed entrance, nose, eyes, ears, and application in large amounts of water cleaning or directly for help doctors.
This article 5, allergy, before the use should be coated a layer of skin and skin creams or wear infiltration gloves.
6, pay attention to the work of the workshop, humidity will influence humidity adhesion, high temperature easy plugging nets.
