News Center

How to select insulating glass production line, insulating glass equipment and insulating glass production line procurement in 2019, in addition to quality and price, The most important thing for Zui is after-sales service. Insulating glass manufacturers, whether novices or experienced, will always encounter problems of one kind or another in the process of use. They need the assistance of insulating glass production line manufacturers to solve them, so as to ensure the normal use of insulating glass production lines. 2019 is expected to be a year of severe economic situation. From the central government to the local government, they are cautious about the economic development. In this case, how to deal with the complexity of the purchase of insulating glass production lines

2019/07/05 14:06:44

How to operate the glass washer Before the glass washer works, check the glass washer to check whether the pipeline system has air or water leakage. If so, notify the maintenance personnel to repair it. The glass washer shall check whether the cleaning fluid is sufficient, and if not, increase the cleaning fluid in time. Start inching test run first, and then idle for 2-3 minutes to check whether the drive system (motor, coupling, reducer) and conveyor belt are moving smoothly. After confirming that everything is normal, production can be started.

2019/06/30 14:54:06

How to choose a hollow glass argon inflator At present, there are two types of hollow glass inflators (hollow inflators): online hollow glass inflators and offline hollow glass inflators. 1. The online insulating glass inflator is designed to inflate while pumping out the hollow, which is fast. The insulating glass inflator is used together with the insulating glass line. That is, the insulating glass inflator is placed at the plate pressing outlet of the insulating glass production line. The finished insulating glass is inflated with the insulating glass inflator. After inflation, the inflator is used to glue (or glue with a glue machine) on the glue line. The inflator is ZCQK (series) insulating glass inflator. When

2019/06/21 15:21:25

The quality control of insulating glass filled with argon The filling of insulating glass with almost high standard dry argon is an important measure to ensure the excellent quality of insulating glass, such as energy conservation, heat insulation, sound insulation, non condensation, oxidation prevention, internal and external pressure balance, etc. The argon filled in the insulating glass is measured by its content. Not only should the content of argon filled in the insulating glass meet the requirements, but also the long-term maintenance of argon filled in the insulating glass is an important indicator to ensure the quality of argon filled in the insulating glass. In the process of insulating glass argon filling, many enterprises cannot master the process of insulating glass argon filling. Some enterprises use insulating glass argon filling equipment

2019/06/13 14:52:51

What are the benefits of using insulating glass_ In the vertical glass washer market, various industries are booming. Among them, the insulating glass equipment industry has undergone many changes. There are specific specifications from the formulation of standards to the improvement of equipment. Although it is impossible to cover all aspects, it plays an important role in the development of the insulating glass equipment industry. What is the driver of its development? Yes, it has its unique advantages. The building loses a lot of heat from the windows in winter. According to the statistics of the United States, the energy lost by buildings through windows accounts for about 30% of the energy consumed by buildings. In Sweden, the proportion is larger, about 70%. Our country is unified

2019/04/14 15:38:04

Multi functional insulating glass intelligent inflator new product introduction I. The significance of filling argon on the production line lies in the process of filling argon on the insulating glass (filling argon at the pressure outlet of the laminated plate of the insulating glass production line, after filling argon, the insulating glass enters the sealant production line to make structural glue for the insulating glass), It is completed at one time on the insulating glass laminating and gluing production line. This argon filling process is relatively simple and efficient. The characteristics of using the inflator on the production line The inflator on the insulating glass production line is a kind of accurate argon filling

2019/03/11 15:24:51

How much argon should be filled into the insulating glass is appropriate. At present, filling argon into the insulating glass has become a common practice in the production of insulating glass in China. In Tianjin and other cities in China, it has become a common requirement to fill insulating glass with inert gases such as argon. The amount of argon filled into the insulating glass is measured by the concentration of argon inside the insulating glass. What is the appropriate concentration of argon to fill the insulating glass? Internationally, the initial concentration of argon is usually determined according to the European standard or the requirements of insulating glass users. European standard EN1279 specifies the initial inflation concentration, tolerance and quantity of argon filled insulating glass

2019/02/19 16:16:23

The insulating glass includes those equipments1800 full-automatic insulating glass cleaning and laminating production line. In the market, insulating glass is a new building material with good heat insulation and sound insulation, beautiful and applicable, and can reduce the dead weight of buildings. It is a high-efficient sound insulation glass made by bonding two (or three) pieces of glass with a high degree of high air tightness composite binder. The types of insulating glass equipment are mainly distinguished from the following aspects: 1. According to the structure of the equipment, there are vertical and horizontal (horizontal) types. 2. There are many combinations according to the automation level of the equipment. 3. According to the layout size of glass, there are

2019/02/17 16:26:27

The six core factors of poor dispensing of the glue dispenser the dispensing effect of the two-component glue dispenser has a great impact on the product quality, so many customers are very concerned about the poor dispensing of the glue dispenser, but at present, the poor dispensing is more caused by the operation, The following six core factors that lead to poor dispensing of the dispensing machine will be shared by Pinyao: the selection of dispensing machine needles: improper dispensing machine needles will also lead to too much or too little dispensing, so it is recommended that the diameter of the needles should be controlled at about half of the dispensing amount as far as possible, so as to ensure greater production efficiency; Glue dispensing pressure control: use glue dispenser

2019/01/27 15:48:44

How to test the butyl rubber coating machine? In order to ensure the normal operation of the butyl rubber coating machine, regular testing of the equipment is a must. In the process of detection, hidden dangers of equipment in technology, working accuracy and parts operation can be found in time, and targeted repair measures can be taken to improve equipment life and work efficiency. So, what are the common ways people use in daily equipment testing? How to detect diyi, initial dew point and ultraviolet radiation of butyl rubber coater? These are two Zui based detection methods

2019/01/18 16:12:29