Common man-made boards being loaded include Hexiang board, plywood, blockboard, particleboard, MDF, etc. The MDI glue used in the Hexiang board does not produce formaldehyde pollution. Plywood and plywood are often used to make furniture that needs bending deformation. Due to the relatively large amount of glue used for plywood, it is difficult to control the formaldehyde content. Blockboard The performance of blockboard is sometimes affected by the core material. Particleboard The solid wood particle board appearing in the particleboard market is actually particleboard. The quality of particle board has been recognized by the public. MDF MDF, with good plasticity, can be used for carving. The common facing materials of panel furniture include veneer, melamine facing, wood grain paper, PVC plywood, polyester paint, etc. The last three finishes are usually used for middle - and low-grade furniture, while natural wood veneer is used for high-end products. The composite multilayer board is a high cost material, which is compressed from 6-8 layers of 3mm thick board, and has waterproof, deformation resistance and other functions.
Because the high cost of solid wood furniture makes the dominant position of solid wood furniture gradually decline. In recent years, with the continuous development of the furniture industry, everyone's requirements for furniture supplies have been constantly improving, but according to the relevant situation, wood furniture will gradually replace the position of related solid wood furniture! The main types of furniture veneer are cherry veneer, walnut veneer, oak veneer, beech veneer, sabelian veneer, ash veneer, oak veneer, elm veneer, basswood veneer, southwest birch veneer, Yunnan birch veneer, etc. The main specification is 2500 * 100 * (0.2-0.6) mm. The main types of floor veneer are oak veneer, ash veneer, walnut veneer, Sabri veneer, maple veneer, beech veneer, Jatoba veneer, red sandalwood veneer, oak veneer, southwest birch veneer, yellow rutile veneer, etc. The main specifications are 930 * 90/135 * (0.5-0.6) mm. The main types of peeled wood are peach blossom pistil wood, Augustan wood, ice candy wood, osmanthus wood, poplar wood, birch wood, pine wood, basswood wood, etc. The main specification is 2500 * 1250 * (0.1-0.6) mm. The main types of technical wood are ebony wood, iron knife wood, zebra wood, teak wood, oak wood, walnut wood, cat's eye wood, etc. The main specifications are 2500 * 640 * (0.2-0.6) mm. The main characteristics of bamboo skin are natural color flat pressing, natural color side pressing, carbonization flat pressing, carbonization side pressing. The main specification is 2500 * 430 * (0.2-0.6) mm. Edge banding: ordinary non-woven wood edge banding, non cloth wood edge banding, technology wood edge banding, etc. Main specifications: width: 10mm-100mm; thickness: 30-60 wires.