1. Light in weight and soft in nature: only clay Watt Concrete tile It can be easily transported, and can be used as stone tile and bent into ridge tile.
2. High quality and beautiful: different colors and shapes can form a variety of beautiful and generous layers.
3. Economical and practical: the product integrates waterproof and decoration, which is conducive to the reduction of the overall construction cost.
4. Easy and fast installation: cold construction, pure, simple and fast.
5. The product is characterized by rich colors, various forms, light weight, durability, simple construction, etc. The product conforms to the industry Linoleum tile Specified requirements
5. Performance
1. All round: continuous research and testing of products and application technologies, colorful Glass fiber tile The roof can resist the erosion caused by various climatic factors such as light, cold and hot, rain and freezing.
2. Thermal insulation: the thermal conductivity of the colorful glass fiber tile roof is low, which blocks the heat transmission from outside to inside in summer and from inside to outside in winter, thus ensuring the comfortable life of the top floor residents.
3. Sound absorption and sound insulation: Colorful glass fiber tile roof can absorb environmental noise such as raindrop impact, so as to ensure the quiet life of top floor residents.
4. Corrosion resistance: Colorful glass fiber tile roof will not appear rust, stain and other phenomena under the influence of acid rain and other harsh urban environment.
5. Dustproof self-cleaning property: the colorful glass fiber tile roof is not easy to accumulate dust and form obvious stains, and will not accumulate water stains even under the condition of long-term rain. It will look more clean and bright after being washed by rain.
6. Durability and low maintenance rate: the colorful glass fiber tile itself has a very long service life, ranging from 25 to 40 years. If the installation is correct, the colorful glass fiber tile roof only needs less maintenance or even no maintenance.
7. Various shapes: the colorful fiberglass tiles are flexible tiles, which can be paved into traditional roof tiles with conical, spherical, arc and other special shapes, and are suitable for slopes with small slopes.
8、
9. Simple paving: two people can pave 100 square meters in two days. Except nails, there is no need to pave other Accessories, and roof ridge Gutter The eaves are superimposed by the tile body itself.
10. Light load bearing capacity of the roof: the material used for paving the roof per square meter is about 10kg. Traditional roof tile: 45kg/m2.
Construction process Beijing linoleum tile/ asphalt tile /Colorful tile/glass fiber tile/colored stone Metal tile /Example of factory direct sales Figure 1 Beijing asphalt shingles/asphalt shingles/colorful shingles/fiberglass shingles/colored stone metal shingles/example of factory direct sales Figure 2 Beijing asphalt shingles/asphalt shingles/colorful shingles/fiberglass shingles/colored stone metal shingles/example of factory direct sales Figure 3 Beijing asphalt shingles/asphalt shingles/colorful shingles/fiberglass shingles/colored stone metal shingles/example of factory direct sales Figure 4
1： Requirements
1. Cement: grade no less than 425.
2. Mix ratio: 1:3 (cement: sand) volume ratio.
3. Leveling layer thickness ≥ 25mm
2： Snap a line
The size of each colorful glass fiber tile is consistent, but the small differences caused by manual installation accumulate. It may cause the bottom edge of colorful tiles or decorative joints to be skewed. Therefore, it is necessary to snap lines on both the large roof and the cabin surface, which helps to ensure that the colorful glass fiber tile is laid in a straight line horizontally and vertically. The difference between the width of exposed surfaces between layers shall not exceed plus or minus 3mm. The two ends of the colorful glass fiber tile shall be lapped tightly to ensure that the colorful glass fiber tile can cover the whole roof.
The vertical snap line is very important for the alignment of decorative joints from eaves to ridges. Especially in the installation of single-layer tiles. The distance between each line in the vertical direction is 167 mm, and the spacing between horizontal snap lines is 145 mm. The top of each layer of colorful glass fiber tile shall be consistent with the snapped horizontal line. In this way, these snapping lines can be used to ensure the alignment of decorative joints of colorful glass fiber tiles.
