What is the construction process of the professional service/project/solution for the leakage and plugging of sewage pool?
1. Construction process: determine the leakage point → clean the leakage base surface → drill hole → Cleaning → Installation of grouting nozzle → High pressure grouting of foaming slurry → Observation → Leakage repair → Removal of grouting nozzle → Slot repair → Inspection → Acceptance
2. Key points of construction:
(1) Mark the water seepage point accurately, and clean the water seepage part.
(2) Use fast Plugging agent The distance between embedded grouting pipes shall be determined according to the actual situation, generally about 1m.
(3) Grouting with electric high pressure pump , water soluble polyurethane The plugging agent shall be injected into the concrete gap from the grouting pipe until it cannot be pressed (injection rate ≤ 0.011/min) and then closed valve After 24 hours, cut (remove) the grouting nozzle.
(4) In order to achieve long-term waterproof purpose, polyurethane waterproof layer can be painted on the construction surface.
(5) Clean equipment and tools with solvent after grouting.
(6) Keep the construction site ventilated, pay attention to fire prevention, and prohibit kindling.
What are the methods of leaking stoppage in the pool and what is the construction process of leaking stoppage in the pool. In fact, we can also solve the problem from the source, as long as we strictly control the quality of the materials, the chemical grouting materials used, with product certificates, instructions and technical reports, can be used only after the on-site sampling and retest are qualified, and no fake or inferior products will be used. In addition, the operating procedures and technical specifications shall be strictly followed, and no jerry building shall be done during construction, so that it is basically OK. Professional undertaking: various waterproof plugging projects, sewage pool expansion joint plugging, sewage pool plugging, underground garage plugging, sewage pipe plugging, basement plugging, cable trench plugging, hydropower station basement plugging, pressurized plugging, basement plugging, pool plugging, mine plugging, tunnel plugging, cable trench plugging, expansion joint plugging, elevator shaft plugging, Leakage stoppage works for coal conveying gallery, highway tunnel, subway tunnel, underground tunnel and pump house. The registered capital of the company is 2.88 million yuan, and the working capital is more than 10 million yuan; It has a high-level technical construction team, including 16 people with senior professional titles and 86 people with intermediate professional titles. With anti-corrosion qualification, safety qualification and construction qualification, the company has many branches and offices, and has strong technical force
We pay attention to the training of waterproof technical personnel. At present, we have high-level leak stoppage engineering technology related personnel, construction management personnel, advanced construction technology and professional construction team, and have been dedicated to building waterproof and leak stoppage construction technology for more than 40 years. With the progress of science and technology, in recent years, the company has introduced a new technology of waterproof and leak stopping with pressure, impermeability and vibration resistance, adopted high-tech nano molecular waterproof materials, accurately prepared a new technology of scientific pressure reducing grouting, and professionally treated all kinds of underground engineering leakage, especially the leakage of cracks in large volume concrete of basements and pools, and the leakage of settlement expansion joints. The company has many years of experience in maintenance and treatment, The company is fully capable of difficult waterproof and plugging. The company adheres to the enterprise style of "unity and hard work, forge ahead, rigorous and realistic, and hard work", and constantly blazes new trails. It relies on strong strength, scientific management and quality service, and adheres to the enterprise tenet of "honesty and realism, serving the society, and users first". Act according to the modern enterprise management mode. According to the requirements of the provincial construction department, the municipal construction committee, Party A's unit and the environmental protection department, civilized construction, quality follow-up and lifelong responsibility. We are willing to work with our domestic colleagues to make our due contribution to the innovation and application of China's waterproof and plugging technology. We sincerely welcome all enterprises and individuals to call us for consultation, and negotiate with Yancheng Ruixiang Waterproof and Plugging Engineering Co., Ltd., one of the first enterprises to obtain the first level of safety qualification for high place hanging operations from Jiangsu Administration of Work Safety, Grade II enterprise with professional qualification related to anti-corrosion construction power system in China.
1、 Brief Introduction of Water Soluble Polymer Chemical Grouting Plugging
High pressure grouting plugging is to use the mechanical high pressure power (high pressure grouting machine) to inject water soluble polymer chemical grouting materials into the concrete cracks. When the grout encounters the water in the concrete cracks, it will quickly disperse, emulsify, expand, and consolidate. This consolidated elastomer fills all the cracks in the concrete, and completely blocks the water flow outside the concrete structure, To achieve the purpose of water stop and leakage stoppage. High pressure grouting plugging technology is a new waterproof technology of high-pressure airless grouting with international advanced level, which is a new technology used in water-soluble grouting materials in developed countries.
2、 High pressure grouting plugging principle:
Water soluble polymer chemical grouting material is a kind of polymer cutting flexible elastic material, which is composed of several molecular materials of polymer chemical agricultural production system, and is proportioned according to strict proportioning standards.
Commonly used multi polymer materials include propylene, crystal and gel. Polyhydroxy compounds are polyethers, which can have several functional groups and molecular weights. After the grout is poured into the concrete crack, it will meet with the leakage water to produce chemical reaction, release carbon dioxide, and form macromolecular organisms. So as to achieve the purpose of seepage prevention and plugging.
Water soluble polymer chemical grouting material is a kind of bottom viscosity, one component synthetic polymer flexible elastic material in the form of flexible elastomer. It has the characteristics of cross-linking reaction when encountering water, and foaming to form a multi-element network closed elastomer. When it is injected into the concrete crack structure under high pressure to extend until all the cracks (including those that are hard to detect by the naked eye) are filled, when it encounters water (water injection), it is accompanied by cross-linking reaction, releasing a large amount of carbon dioxide gas, generating secondary seepage pressure. The high pressure thrust and secondary seepage pressure press the elastomer into and fill all the cracks,
To achieve the purpose of leak stop It can be seen that the water soluble polymer chemical grouting material is one of the plugging materials with good performance. The leakage cannot be treated with ordinary materials. After the high-pressure grouting plugging technology is used, the leakage is successfully plugged at one time.
