Manufacturer of anchor nails for external wall insulation

-Anchor nails are connected wall and Insulation board A kind of fastener between them is composed of galvanized screws, nylon expansion tubes and fixed discs. According to the different thickness of insulation layer, it can be divided into various specifications. It is widely used in building decoration. Installation quantity of parameter table: 6/㎡ for 1-10 floors, 7/㎡ for 11-20 floors, 9/㎡ for 21-26 floors. Any single plate with an area greater than 0.1 ㎡ must be equipped with anchors, and the number depends on the shape and site conditions; The density of anchors shall be increased at the external corner, under the cornice and around the edge of the hole, with the distance not more than 300 mm and not less than 60 mm from the edge of the base course. other The main specifications are: 8 × 60, 8 × 80, 8 × 100, 8 × 120, 8 × 140, 8 * 160, etc. According to the thickness of the insulation layer, there are various specifications. It is widely used in building decoration, Insulation nail It is widely used in the thermal insulation layer of buildings. It has good weather resistance and aging relieving performance, and is stable for a long time at - 40 ℃ to 80 ℃. Good shock resistance, weathering resistance, fracture resistance and firmness. Trade description Anchor nail manufacturer.