GC Series programmable power meter
Product Details
GC series programmable active power, reactive power and power factor measuring meters display single
Three phase active power, reactive power or power factor. Support single-phase, three-phase three-phase, three-phase four wire signal input mode. As one
The digital display active power, reactive power or power factor meter can also be used to realize active power, active power
Emergency signal protection is activated when reactive power or power factor exceeds the limit; It can also be used as active power, reactive power or
Power factor transmission and use; RS485 communication module can also be selected to realize remote control and data acquisition.
The main models are:
GC1P-2□1 GC3P3-2□3 GC3P4-2□3 GC3Q3-2□3 GC3Q4-2□3 GC1H-2□1 GC3H-2□1
GC1P-9□1 GC3P3-9□3 GC3P4-9□3 GC3Q3-9□3 GC3Q4-9□3 GC1H-9□1 GC3H-9□1
GC1P-6□1 GC3P3-6□3 GC3P4-6□3 GC3Q3-6□3 GC3Q4-6□3 GC1H-6□1 GC3H-6□1
GC1P-7□1 GC3P3-7□3 GC3P4-7□3 GC3Q3-7□3 GC3Q4-7□3 GC1H-7□1 GC3H-7□1
The main technical parameters are as follows:
Major projects | Technical indicators |
accuracy | Active power and reactive power are 1.0; Power factor is 0.2 |
display | Programmable LED display |
transport enter measure amount | transport enter electric Pressure | AC voltage | AC100V, 200V, 380V (free setting of transformer magnification) |
Overload | Continuous 1.2 times; Instantaneous twice (1S) |
impedance | Voltage: ＞ 300K Ω |
transport enter electric flow | AC current | AC1A、 High (free setting of transformer magnification) |
Overload | Continuous 1.2 times; Instantaneous 10 times (5S) |
impedance | Current: ＜ 2m Ω (each phase) |
Resolution | Last digit 1 word |
Display range | Power: 0-9999; Power factor: - 0.5-1 0.5 |
attach plus Work can | Start emergency signal output | relay Contact output, contact capacity 1A/AC250V |
Transmit output | The output, input and Power Supply Electrical isolation between ports, load capacity ≤ 500 Ω |
Digital interface | RS485, MODBUS-RTU protocol |
Power Supply | Scope of work | AC220V ± 10% 50Hz (special power supply can be customized) |
power waste | ＜3VA |
insulation resistance | ＞100MΩ |
Insulation strength | Input power ＞ 2KV; Input output ＞ 1KV; Output power>2KV |
Working conditions | Ambient temperature: - 10-55 ℃; Relative humidity: ＜ 93% RH; Altitude: ＜ 2500M; Places without corrosive gas |
