Corporate News

The AB gate is usually a vehicle passage, and the AB small gate is a pedestrian passage. Door A and door B form a relatively closed inspection area. Open door A, drive to the inspection area, close door A, inspect the vehicle, scan the vehicle chassis, etc., and confirm that the vehicle is safe, then open door B, and the vehicle enters; When the vehicle completes its mission, it needs to leave the supervision area. First, open the door B, and then the vehicle enters the inspection area. Then close the door B. After the inspection, open the door A to release the vehicle. The door AB cannot be opened at the same time. The door A must be closed before the door B can be opened. Conversely, door B must be opened and door A must be closed

2022/09/13 10:58:45

1 Scope of application 1. It is applicable to the substation gate of industrial and civil buildings, as well as the gate of general industrial plants. 1.2 (17j610-1) The steel gate of the substation and distribution station is applicable to the area where the basic wind pressure is ≤ 0.7kPa and the temperature is - 40 ℃ - 40 ℃. When it is used in the area with high wind pressure, the professional manufacturer should take effective wind resistance measures. 2. Type and door model: professional manufacturer - Anhui Saikemen Factory has four types of steel doors for the substation and distribution station: side hung door (PM1) for the substation and distribution station; Sliding door of substation (PM2); Folding door of substation (PM3); Substation overlap

2022/08/17 10:56:27

1 Overview The steel doors and windows in the transformer room are steel doors and windows with ventilation and heat dissipation function specially used in the transformer room. 2 Prepare the civil engineering design task diagram of transformer room in the atlas of 10/0.4kV Transformer Room Layout and Installation of Common Equipment Components in Power Transformation and Distribution Stations designed according to 2.1 national architectural standards of electrical discipline. 3. Scope of application: It is applicable to the doors and windows outside the transformer vessel that are independent or attached to industrial and civil buildings, closed or open. Enclosed transformer room is divided into high type and low type. 4. Classification and number of door type and window type 41 Professional manufacturer - Anhui Secdoor Factory transformer room steel door type is divided into belt hundred

2022/08/12 16:51:35

1. This door meets the health standards of the food industry. The front and back sides of the door are made of 304 stainless steel plates that are acid and alkali resistant. The door body is pressed with full abrasive tools and does not contain any wooden products, which makes the door anti-corrosion and moisture resistant and can meet any cleaning requirements. The traditional wooden doors and aluminum multi doors have no obvious functions in this respect, so they cannot be cleaned arbitrarily. In addition, the stainless steel free anti-collision door is much thinner than the traditional door, which is more convenient in the turnover of people and goods. 2. The stainless steel free anti-collision door is surrounded by rubber seals, which has the functions of insect prevention, dust isolation, wind isolation and odor isolation, So as to improve environmental sanitation

2022/06/14 16:54:31

Design description: The electric sliding door is of door body structure. The electric sliding door designed by our company is composed of motor, traveling wheel structure, transmission part, track, sealing system, electric control system, etc. It is opened horizontally to both sides; The door body is equipped with a clutch system. In case of power failure or motor damage, the door can be opened or closed manually by one person, and the switching speed is close to that of the motor; In places where the motor is damaged or the door body is suddenly powered off during operation, frequently starts, and the working environment is poor and it is not convenient for maintenance, the door panel has strong impact resistance and is safer and more reliable to use; The small door and lighting window of pedestrian passageway can be opened as required. Whether electric or manual, the door can stop

2022/06/14 10:43:55

Anhui SECCO Intelligent Technology Co., Ltd. (special door factory), which was registered in industry and commerce in 2002, set up a factory for production. In 2005, it applied to register the trademarks "SECCO" and "SAYOK" of the sixth category of metal door and window series in the Trademark Office, specializing in the production of special doors for processing industry, industrial non-standard customized doors, national standard atlas doors and windows and special steel windows. The products are characterized by "special, special, refined and new". The office of the company is located at No. 499, Qianshan North Road, Hefei, Anhui Province, and the factory is located in Xinqiao Industrial Park, 8 kilometers southeast of Xinqiao Airport, Shushan District, Hefei. Main products of Anhui SECCO: thermal insulation doors, closed doors, sound insulation doors, anti explosion doors and windows, explosion venting

2021/10/27 16:38:28

The ray gate is mainly used for the entrance and exit to block the passage of rays, mainly used in hospitals, machine rooms and mining areas. According to the door type, it can be divided into side hung anti radiation door, push-pull anti radiation door and electric anti radiation door. The appearance of the door body can refer to the appearance of our company's steel fireproof and anti-theft door. ◆ Side hung anti radiation door The side hung anti radiation door can be divided into inner door and outer door. The structure and material of the door body are determined according to the power of the radiation machine (KV) and the size of the door opening. The hardware is special. ◆ Push and pull the anti radiation door. The opening direction of the anti radiation door is parallel to the wall. The structure and material of the door body are based on the power of the radiation machine

2021/10/27 16:32:11

Anhui SECCO supplies and produces shield doors, electromagnetic shield doors, electromagnetic shield door transformation, electromagnetic shield doors of high-voltage converter stations, electromagnetic shield doors of 500KV power stations, and radiation shielding doors in Hefei, Hebei and other places in Anhui. There are many types of screen doors, which can be divided into substation screen doors, power station screen doors, nuclear magnetic resonance room screen doors, subway station screen doors, CT room screen doors, substation (relay room) screen fire doors, converter station galvanized steel plate screen fire doors, hospital screen doors, large machine room screen doors, etc; According to the main performance characteristics, there are electromagnetic screen doors, fire screen doors, screen sound insulation doors, radiation screen doors

2021/10/27 16:26:44

The scope of application is applicable to industrial plants and auxiliary buildings with high noise (ventilation room, refrigeration room, air conditioning room, diesel generator room, printing workshop, etc.) and places with sound insulation requirements for civil buildings with equivalent conditions of cultural and entertainment buildings (such as auditorium, conference hall, bulletin hall, theater, gymnasium, studio, recording room, studio, etc.). For the occasions where the door needs to be harmonious and unified with the surrounding environment, and the decoration requirements are high, the surface of the door body can be subject to secondary decoration. The size of the door opening is 900~3300 wide and 2100~3600 high. The overall dimensions, specifications and opening mode of the door body are subject to the customer's requirements

2021/10/27 16:19:37

There are at least five reasons for choosing Anhui SECCO: 1. 16 years of industrial and commercial registration and production experience, which can produce and supply goods for customers; 2. It is produced in its own factory, and the delivery time and quality are well controlled; 3. Direct sales by manufacturers and profit sharing by customers; 4. Shaped products, if the quantity is small and urgent, can be delivered the next day after placing an order; 5. More than ten years of SECCO brand reputation and perfect after-sales service system make you feel at ease. Anhui SECCO is an entity manufacturer. In 2002, it was registered with the industrial and commercial administration for production. In 2005, SECCO SAYOK applied for trademark registration. The factory has been operating for 16 years, specializing in the production of special function steel doors, national standard atlas doors, special control doors, etc

2021/10/26 15:56:54