Epoxy resin rebar planting glue is used for rebar anchoring and rebar planting reinforcement
Price standard of Grade A epoxy rebar planting adhesive
preface; GST modified epoxy anchorage adhesive; Definition of planting bar anchorage glue; Ruishengte brand engineering packaging planting adhesive is a solvent type chemical cohesive reaction modified epoxy resin adhesive, which is suitable for rooting and anchoring engineering. Component A: Component B=3:1
Learn more about the new information about the price and technical indicators of the manufacturer of Grade A modified epoxy anchorage adhesive
Specific application scope
Column reinforcement implantation
Hole filling and reinforcement
New wall reinforcement
New inclined plate reinforcement
Cantilever structural reinforcement
Reinforcement connection of new structure
Tunnel engineering structure connection
Reinforcement and reconstruction of bridges and roads
usage method
Mix the components A and B of the rebar planting glue with an electric drill to avoid mix proportion error caused by precipitation during storage, affecting the curing time, etc.
Mix the rebar planting glue with the proportion of component A: component B=3:1, and then use it.
AB Detailed description of modified epoxy bar planting anchoring adhesive;
Epoxy rebar planting adhesive is a two-component epoxy adhesive of A and B, which has thixotropy, high tensile and shear strength, excellent aging resistance and fatigue resistance, load displacement characteristics * * *, and achieves the same embedding effect through bonding and key locking. The required hole diameter of the glue is small, and the vertical hole, horizontal hole and inverted hole can be easily planted with rebar. Generally, the drill hole diameter is d 4-8mm, and the anchorage length is 15d. The anchorage force value of the planted reinforcement is generally greater than the yield value, which meets the requirements of Grade A glue in Code for Design of Concrete Structure Reinforcement GB50367-2006.
AB Two component modified epoxy anchorage adhesive --- Product characteristics
Modified epoxy resin, free of styrene, safe * * *.
Acid and alkali resistance, aging resistance, good heat resistance, no creep.
Excellent seismic performance, convenient and fast use, safety and environmental protection.
AB Two component modified epoxy anchorage adhesive --- Product use
Reinforce and strengthen the base materials such as concrete, rock and brick wall.
Fixed installation of various basic equipment and reconstruction and expansion of building structures.
Building structure reinforcement and building frame planting reinforcement.
Anchorage connection between curtain wall bracket fixing steel structure and concrete.
Equipment foundation fixation, elevated road sound insulation board and guardrail fixation.
Tunnel pipeline fixation, shear wall planting steel bridge, concrete pavement repair.
AB Two component modified epoxy anchorage adhesive --- Application advantages
The post planted reinforcement reaches the bearing capacity of * * *, and the effect is similar to that of embedded reinforcement.
No expansion stress, can be installed with small margin and small spacing.
Excellent thixotropy, no leakage or vertical flow during vertical operation.
Hard plastic packaging, unused glue can be reused without waste.
Convenient construction, rapid solidification and saving Work hours.
AB Two component modified epoxy anchorage adhesive --- Construction description
Construction steps: drilling → hole cleaning → glue injection → rebar implantation → waiting for curing.
Drilling: * * * generally refers to the reinforcement diameter of about 10~20d, and the diameter is 4~8mm larger than the reinforcement.
Hole cleaning: remove the powder in the concrete (three brushes and three blows).
Rebar treatment: sundries on rebar surface shall be cleaned and derusted.
Glue injection: use glue injection * * * to inject glue from the bottom of the hole, and the glue amount accounts for 2/3 of the hole depth.
Rebar planting (anchoring): slowly rotate the rebar or bolt in the same direction and insert it into the hole, and then enter the next process after curing.
Curing time;
Substrate temperature | Installation time | Curing time |
5℃ | ≥60min | 90h |
15℃ | ≥45min | 72h |
25℃ | ≥30min | 48h |
35℃ | ≥20min | 24h |
l
AB Two component modified epoxy anchorage adhesive --- Packaging, storage and transportation
This product is packed in double plastic rigid tubes, 360ml/piece.
This product is not dangerous and can be transported with general chemical building materials. It is not allowed to expose to the sun, rain or damage the package during transportation.
The product should be stored in a cool (5~25 ℃) dry warehouse away from light for 12 months.
matters needing attention
When the temperature is low, component A and component B can be respectively warmed in a 60~80 ℃ warm water pan (barrel) to reduce viscosity.
The construction environment temperature should be below 40 ℃. The initial setting time is 1 hour under normal temperature, and the initial curing time can be 24 hours under normal temperature. The curing time is slightly longer in negative temperature or humid environment.