Supply to Yinchuan epoxy Glass flake coating Epoxy glass flake mastic
epoxy Glass flake mastic construction scheme
1、 Glass flake mastic is a heavy production Anticorrosive coating It can extend the service life of objects when applied to the anti-corrosion field. Glass flake mastic has strong acid and alkali resistance and high and low temperature resistance.
2、 Key points of construction:
1. The construction temperature should be 15-20 ℃, and the humidity should not be more than 80%.
2. When applying, first apply the bottom layer, then the middle layer, and then the surface layer.
3. Within 6 hours of rust removal, wipe the surface of the base course with volatile solvent, and spray after the solvent volatilizes Primer 。
4. Scale mastic construction shall be carried out after the primer is dry. The construction of flake mastic should be combined with plastering and rolling. The thickness of one plastering is about 1mm, which is generally completed in two times. The latter process is carried out after the previous layer of mastic is dry (usually one day apart).
5. When smearing, keep a certain angle between the trowel and the base course, push along the sharp angle of the trowel in the direction of the sharp angle, try to squeeze out the air between the plaster and the base course, and the smearing shall be carried out in one direction, without stacking and spreading.
6. In order to eliminate bubbles, special defoaming rolling pressure is used.
3、 Quality acceptance:
1. The surface of epoxy glass flake mastic is flat without sagging, missing brush, peeling, etc.
2. The thickness of epoxy glass flake mastic shall reach 1.5-2.5mm
3. The color and luster of the epoxy glass paste shall be uniform.
