Fluorocarbon spraying aluminum veneer What are the precautions when using fluorocarbon spraying aluminum veneer At the early stage of the development of fluorocarbon sprayed aluminum veneer, everyone had different views. But now, with the continuous development of the Internet, our life has gradually entered a new era, and more and more products have penetrated into our lives. But how about using fluorocarbon to spray aluminum veneer? Next, I will solve this problem for you. 1、 The price of 2.5mm fluorocarbon sprayed aluminum veneer is much more than one square meter, and there is a lot of information about the price. In fact, these prices are not meaningful for reference. Aluminum veneer is not a fast moving consumer product, and there will be a clear price. If the price of aluminum veneer is not calculated according to the design requirements of the project, even the price quoted by the aluminum veneer manufacturer cannot be used as the final price. Fluorocarbon aluminum veneer: 200 yuan to 275 yuan aluminum veneer is a non-standard customized product, and there are many factors that determine the price. Generally, the manufacturer will consult the aluminum veneer manufacturer, and the manufacturer will also ask the customer about the aluminum veneer specifications, size, shape, thickness, surface treatment, aluminum material requirements, product quantity, whether tax and freight are included, These are the conditions for calculating the price of aluminum veneer. Generally, the aluminum veneer products used in engineering projects differ in processing costs due to the different decorative parts involved. Therefore, the manufacturer's quotation according to the drawings is the most accurate. 2、 What are the precautions when using fluorocarbon to spray aluminum veneers? 1. Before ordering, special attention should be paid to the inspection of manufacturers to investigate their production capacity, scale, engineering performance, and focus on their technical design capabilities. Do not use low level and small scale manufacturers because of low prices, otherwise it will bring great difficulties to construction and management, If the consequences are serious, it will cause irreparable economic losses. 2. As an important process before the processing of fluorocarbon sprayed aluminum veneer - field data measurement, it is recommended to use infrared distance measuring instrument for measurement. If the traditional tape measure is used for measurement, there will be measurement errors, which will have a very adverse impact on the aluminum panels requiring close seam splicing. 3 Avoid one-time processing and forming of aluminum plates When processing fluorocarbon coated aluminum veneers, all aluminum plates should not be processed and formed at one time. The last aluminum plate and corner plates in each installation area should not be processed temporarily. After all fluorocarbon coated aluminum veneers in this area are installed, conduct on-site data measurement again to obtain accurate dimensions for processing, To avoid unnecessary rework and economic losses. 4. The fluorocarbon sprayed aluminum veneer with protective film is a metal decorative panel, but its fluorocarbon coating is easy to scratch. Therefore, in addition to the requirement that the manufacturer must bring protective film to the site, it is also important to avoid scratches and heavy impact during handling and installation, otherwise the overall appearance of the aluminum panel will be seriously affected. 5 Quality problems For the installation method of fluorocarbon sprayed aluminum veneer, the most common and difficult quality problem is that the joints between blocks are uneven, which should be paid enough attention. In addition to paying attention to the uniform and consistent thickness of adhesive during construction, temporary fixing measures should not be removed too early, usually not less than 12h. 6 The waterproof glass magnesium board should be used. The adhesive mounted fluorocarbon sprayed aluminum veneer should be used. The waterproof glass magnesium board or large core board should be used as the base board. Paper faced lapis lazuli board should not be used. The main reasons are: first, the paper faced gypsum board has low strength and is not firmly bonded to the aluminum board; Second, the paper faced gypsum board is not waterproof, and there are usually various water supply and drainage pipelines hidden in the ceiling, which will cause the overall fall off of the aluminum plate in case of local leakage. Third, related concepts 1. The coating method of spraying and spraying is to disperse uniform and fine droplets on the surface of the coated object through the spray gun or disc atomizer, with the help of pressure or centrifugal force. It can be divided into air spraying, airless spraying, electrostatic spraying and various derivatives of the above basic spraying forms, such as large flow and low pressure atomization spraying, thermal spraying, automatic spraying, multi group spraying, etc. 2. Veneer Veneer refers to a wooden material with a thickness of about 1mm, which is obtained by rotating or planing logs and is used to manufacture plywood and other artificial boards. Relevant recommendations: 3mm fluorocarbon spray aluminum veneer, aluminum veneer spray fluorocarbon paint, aluminum veneer, fluorocarbon spray equipment and spray process, aluminum veneer, fluorocarbon spray thickness, aluminum veneer manufacturer, fluorocarbon spray equipment and spray process, how to spray aluminum veneer curtain wall? What are fluorocarbon spraying and powder spraying? Surface treatment method of aluminum veneer How can 3mm fluorocarbon sprayed aluminum veneer save costs? Introduce the advantages of fluorocarbon sprayed aluminum veneer and pre roll coated aluminum veneer. What is the meaning of fluorocarbon in "Fluorocarbon sprayed aluminum veneer"?
![2023 [Zhongying List] The application for the brand optimization plan of Building Materials Network was officially launched](https://meta.bmlink.com/bmlinktg/action/20220905/tg_1190x300.jpg)
