Is it better to stick wallpaper or brush emulsion paint on the wall? You will know it after reading this article - price of emulsion paint

Which integrated cooker is good? What are the key points?

Which integrated cooker is good? The integrated cooker can realize intelligent control. The ignition automatically turns on the fan, and automatically delays the shutdown and flameout. Many families also use this product today. What kind of integrated cooker is good? What kind of integrated cooker is good? 1. The integrated cooker passing the national inspection report is safe and reliable, and its quality is guaranteed. 2. I don't want the so-called automatic cleaning function. 3. The higher the power is, the better. It should not only save energy and power, but also have a mute effect. 4. Experience the noise size on site and check whether the operation is stable. 5. Whether there are safety protection functions such as flameout, air leakage and child lock. 6. Observe whether the surface has defects and whether the corner treatment is smooth. 7. The appearance design and color should be coordinated with the decoration of the kitchen. 8. Whether there is a good after-sales service system. 1. The integrated creative design perfectly integrates the functions of range hood, gas stove, disinfection cabinet, storage cabinet, microcrystalline stove, induction cooker, etc., with unique combination and high-efficiency range hood effect, to maximize the use efficiency of various functions, and fully automated intelligent control, It is true that the smoke absorption rate of high-end kitchen appliances with green environmental protection is more than 99%. It is creative to use micro aerodynamics principle to isolate the pollution source from the external environment in a two-way way, which can not negatively affect the operating vision. 2. Clean kitchen environment. The traditional kitchen equipment has a long space circulation distance of lampblack, and the lampblack spreads seriously. In the process of decline, most of the lampblack spreads to the interior, causing the kitchen walls and objects to be full of oil dirt. The public health work of the kitchen has become a heavy and complicated task. 3. It is true that the exhaust design under low noise stops placing the noise source of the human head, and it is applied to the ultra-low, noise technology and silent air duct design technology to reduce the noise. 4. The intelligent control of modern control system organically integrates the gas stove, range hood, disinfection cabinet, etc. according to the general use mode of people, and the computer control operation is very simple and convenient.

label: Integrated stove

Is the integrated cooker better or the range hood better? You get what you pay for!

Is the integrated cooker better or the range hood better? The price of integrated cookers is relatively high, which can cost tens of thousands of yuan at random, while that of ordinary range hoods is thousands of yuan. The price difference is so big, so is the actual function really different? Is the integrated cooker better or the range hood better? Advantages of integrated cooker 1. Higher oil smoke absorption rate is the original intention of integrated cooker research and development. Even for ordinary integrated cookers, the oil smoke absorption rate is more than 99%. The integrated cooker has innovatively applied the principle of micro aerodynamics, isolated the pollution source and the external environment in two directions, and used the way of downward smoke suction to achieve the goal of not affecting the operating line of sight and not passing through the human respiratory pathway, The lampblack and hot gas will be removed before diffusion, giving you a clean kitchen environment. 2. The integrated cooker perfectly integrates the functions of range hood, gas cooker, disinfection cabinet, storage cabinet, microcrystalline cooker, induction cooker, etc., realizing the maximum use efficiency of multiple functions, facilitating the use of consumers, and eliminating the need to purchase electrical appliances one by one. It is really efficient and convenient. 3. The traditional range hood works in the position of human ears, and after a long time of use, the noise is high, which is easy to cause human upset, dizziness, tinnitus and dizziness. The design feature of the exhaust air under the integrated cooker eliminates the noise source placed on the head of the human body, and the integrated cooker generally applies the ultra-low, noise technology and silent air duct design technology to reduce the noise. 4. The design concept of integrated cooker integrates multiple product functions, which eliminates the space of the traditional wall mounted range hood above, and the large suction makes it possible for the modern kitchen of the island style and open style, which can save a lot of partition decoration costs and greatly increase the space utilization rate. 5. The integrated cooker is more healthy and environmentally friendly. The micro aerodynamics principle is used to remove the lampblack downward, so that the lampblack does not enter the human face and protects the facial skin and respiratory system. 6. At present, most of the integrated stoves on the market have the functions of automatically cutting off the gas source after flameout, automatically cutting off the power supply after leakage, automatically detecting gas leakage, automatic suction and discharge of odorous gas exceeding the standard, and regular reminder. The side suction type integrated environmental protection stoves are safer. Because the side suction type integrated environmental protection stoves adopt a side suction manufacturing structure, the air outlet is far from the fire source, and the use process is safer. Advantages of the range hood: 1. The panel technology of oil smoke separation is adopted, which can separate the oil smoke, and the oil stain will not enter the inner cavity of the range hood, so that the inner cavity is free of disassembly and washing, and the service life of the range hood will not be affected. 2. Because of its inclined plane design, the side suction range hood will not encounter head contact and drip. 3. Because it is very close to the stove, the lampblack can be locked in the first time, and the side air intake is adopted without smoking flames, which will not waste gas. Is the integrated cooker better or the range hood better? 1. The most important thing about the range hood is that the oil smoke of the traditional range hood comes out directly from the pot. First, some of the oil smoke is dissipated due to the air flow, and then some of it is smoked by us. The remaining oil smoke that can be smoked by the range hood may be less than 50%. After a meal, the whole person has become an air purifier. The whole kitchen is still waiting to be cleaned. If your family's diet is heavy on taste and likes stir frying. It is still recommended to use the integrated cooker, because the suction outlet of the integrated cooker is closer than the smoking opportunity, and the smoking effect is better. 2. Cleaning and firepower: whether it is a traditional range hood or an integrated cooker, cleaning is another concern of our consumers. On this point, we have to say that the integrated cooker is too convenient. The traditional range hood is difficult to disassemble and clean, and after a long time of accumulation, there will be oil leakage and oil dripping. The integrated cooker is equipped with multiple oil smoke separation, so only the removable filter screen needs to be cleaned during cleaning, which is very simple. In terms of cleaning, the integrated cooker is obviously superior to the traditional range hood.

label: Integrated stove

What are the common problems of emulsion paint in construction?

Emulsion paint engineering is an indispensable process in home decoration. The following is a very simple study of several problems that may occur frequently to help people better control their own decoration. What are the common problems of latex paint in construction? Common problems in latex paint construction 1. The specific causes of wall cracking depend on the situation. If it is a GRC lightweight partition wall, the joints should be carefully treated to prevent cracking. Generally, glass fiber cloth or kraft paper is used. The partition board itself is prone to small cracks, so it is better to paste glass fiber cloth or beanbag cloth fully to ensure that there are as few cracks as possible in home decoration, In the case of load-bearing wall or solid wall, the reason for cracking may be that the construction putty is too thick or the putty is not dry after a short interval. In this case, there are many cases when the old house is transformed into leveling. 2、 Uneven wall patterns and colors are mainly due to the different colors of the base course, which have not been treated. This situation must be covered by full puttying or brushing a primer. In addition, when selecting materials, pay attention to selecting the same manufacturer, the same variety and the same batch number, otherwise there will be color difference. 3、 The main reasons for the rough surface are that the base treatment is not clean, the brush has sand, debris or the operating environment is not clean. The preventive measures include cleaning the base course, cleaning the brush, and dustproof the environment. 4、 The main reason for peeling is that the base course is too smooth or greasy. The preventive measures are to brush the base course with a steel brush and clean it. The greasy dirt is decontaminated with solvent.

label: Latex paint

What are the advantages of nano emulsion paint over traditional emulsion paint?

Latex paint has become one of the main choices for people's interior decoration, but the quality of various latex paints sold on the market is mixed. In recent years, the market has introduced a new generation of latex paint products. What are the advantages of nano latex paint over traditional latex paint? Advantages of nano emulsion paint 1. Utilize the double dispersion mechanism of nano materials to effectively discharge the moisture of the coating, prevent the invasion of external moisture, and make the film have the performance of breathing. 2. Using the special functions of nano materials and their micromolecular structure, the coordination reaction takes place with the inorganic silica and calcium of the wall, so that the wall and the coating film form a firm claw like permeability, so that the coating film will not fall off, not peel, and has high hardness and scrub resistance. 3. Using the physical property principle of super double interface of nano materials, effectively discharge the invasion of dust and oil, so that the wall has a good self-cleaning function. 4. Using the photocatalysis technology of nano materials, it can efficiently decompose and eliminate harmful gases in the air, reduce the radiation of decomposing ultraviolet rays, enhance the anti-aging ability of the coating, and have the performance of purifying the air. 5. Using the activation technology of nano materials, the Baoshilong nano coating can form an antibacterial coating that can destroy the cell membrane of Escherichia coli, Staphylococcus aureus and other bacteria, thus effectively killing or inhibiting the propagation of bacteria. 6. Unique environmental protection: produced at normal temperature and pressure, non-toxic, tasteless, pollution-free, water-soluble and environmentally friendly. 7. Extremely strong adhesion: it has strong adhesion to mortar, concrete, stone, asbestos board, wood, metal and other building materials. 8. Excellent high weather resistance: applicable to both south and north, high and low temperature. It can also be constructed on the wet foundation surface, and the frost resistant type can be constructed in the low temperature of 0-25 ο C, and stored without deterioration. 9. As the nanometer powder material is extremely fine (close to the molecular structure), it is difficult to disperse (always floating on the water surface), so that the coating can be easily dispersed in production, absorb and refract UVC ultraviolet rays, and have a service life of more than 10-15 years.

label: Latex paint

What are the common quality defects of latex paint painting?

Latex paint is one of the most widely used wall decoration materials at present. It has many advantages, such as convenient construction, strong hiding power, rich colors, scrub resistance, etc. But many friends said that there will be some problems with latex paint painting. What are the common quality defects of latex paint painting? Common quality defects of emulsion paint brushing (l) Blistering: the main reasons are improper treatment of the base layer, too thick coating, especially when the large core board is used as the base layer, it is easy to bubble. In addition to mixing the paint evenly before use and mastering the consistency of the paint solution, 107 glue can be brushed on the bottom putty layer before painting. When reworking and repairing, the blistering and peeling area shall be cleaned up, and 107 glue shall be brushed first before repairing. (2) Alkali removal and powder removal: the main reason is that the base course is wet before drying, and the main reason is that the sealing primer is not brushed and the paint is too thin. In case of anti alkali and powder loss, rework and recoat shall be carried out, and the coated materials shall be removed, and the construction shall not be carried out until the base course is completely dry. During construction, the sealing primer must be brushed first, especially for new walls, the consistency of the finish paint should be appropriate, and the white wall should be slightly thicker. (3) Falling: the main reason is that the viscosity of the coating is too low and the coating is too thick. During the construction, the consistency of the paint must be adjusted, and too much water cannot be added. During the operation, the pen must be dipped frequently, dipped less and smoothly to avoid sagging and flowing. In case of sagging, it is necessary to wait for the paint film to dry and then polish it with fine sandpaper. After cleaning the finish, it is necessary to apply a coat of finish paint. (4) Disclosure: mainly because the paint is too thin, the times are not enough or the material quality is poor. During construction, products with high solid content and strong hiding power shall be selected. In case of bottom penetration, the number of finishing coats shall be increased to meet the painting standard required for walls. (5) The coating is not smooth: the main reason is that the paint liquid has impurities, the paint liquid is too thick, and the quality of emulsion paint is poor. The brand with good leveling property shall be used during construction. Before the last coat of finish paint is applied, the paint solution shall be filtered before use. The paint liquid shall not be too thick. If the coating is not smooth, it can be polished with fine sandpaper before brushing the top coat. (6) Crack: the construction temperature is too low. The film forming temperature of the emulsion paint cannot be reached and the continuous film cannot be formed; Improper treatment of base course: such as coating film cracking caused by wall cracking; The second coat is applied when the first coat is too thick and not completely dry. Due to the different drying speeds inside and outside, the film cracks. Cracking of the applied cement putty causes cracking of the coating film. (7) Falling off: the main reason is that the emulsion paint fails to form a continuous film due to low construction temperature, which will fall off in case of water; The base course is loose, with greasy dirt and other dirt, and the coating film is not well adhered to the base course, resulting in peeling; The strength of base course puttying is low, and the putty layer is not completely dry, then latex paint is applied; The base course is too smooth, resulting in poor adhesion of the coating film. Spalling: prevention: first observe before construction, if there is leakage, ask the relevant department to solve it in time, and add special treatment. It is recommended to use a durable and waterproof bullet to pretreat the wall, and then paint it as usual. The wall must be cleaned during construction. (8) Discoloration and fading: some walls have high temperature, long sunshine time, or water-soluble salts crystallize on the surface of the wall, causing discoloration and fading of latex paint; Some walls contain too high alkali value, which infringes the weak alkali resistant pigment or resin and causes discoloration and fading; Do not use both latex and polyurethane paint at the same time. You can apply the latex paint two days after the paint is applied, or after the latex paint is completely dry (7 days at 25 ℃).

label: Latex paint

How to distinguish the quality of latex paint?

How to distinguish the quality of latex paint? When purchasing latex paint, you should choose the appropriate paint type according to your own needs. Don't blindly pursue "advanced" or be greedy for cheap. But many people can't distinguish the quality of latex paint when purchasing. How to distinguish the quality of latex paint? How to distinguish the quality of emulsion paint? First, look: the real emulsion paint looks tender and shiny. A thin emulsion agent similar to engine oil floats on the bucket. About one millimeter. Fake latex paint ticket is coated with thin water. And the paint belt has a blue head. Smell: the real latex paint has a light fragrance, accompanied by a similar earthy smell. The fake latex paint has a strong earthy smell or no smell. 3、 Wiping: the real emulsion paint is very delicate and smooth. The fake latex paint is astringent and grainy. 4、 Brush: The real latex paint is smooth and has strong covering power. The fake one has no covering power, and it doesn't have too much hardness after drying. 5、 Pull: Take a small stick and stick it with emulsion paint. It is better to hang long wires and keep falling evenly. 6、 Try: stick the latex paint with your fingers and twist it, without the roughness of sand particles. The leveling performance of the paint with water flushing is slippery. Use a stick or spoon to stir the paint evenly, and then lift the spoon to a high place. Observe the posture of the paint flowing down. If the paint falls in blocks, the leveling performance is not good. If the paint falls in a linear way, This indicates that the coating has a certain leveling performance. Secondly, the paint shall be mixed with water according to the proportion in the construction manual, and coated on the nonabsorbent surface with a stiff brush. After it is dry, the smoother the film surface, the better the leveling performance.

label: Latex paint

What details should be paid attention to when purchasing latex paint

What details should be paid attention to when purchasing latex paint? The details determine the quality. If you want to choose the latex paint that is most suitable for the house decoration style, there are still many details to pay attention to when purchasing the latex paint. What details should we pay attention to when purchasing latex paint? Let's get to know with the editor! The details of latex paint purchase 1. Look at the packaging and environmental protection test report. Generally, the front of latex paint will be marked with name, trademark, net content, composition, use method and precautions. Pay attention to the production date and warranty period. The warranty period marked by each brand of latex paint varies from 1 to 5 years. General brand latex paint has environmental protection test report or test sheet. Consumers can have a detailed understanding of the environmental protection performance of latex paint when they see the test sheet clearly. The test report has standards for the test results of VOC, free formaldehyde and heavy metal content. National standard VOC shall not exceed 200g per liter; Free formaldehyde shall not exceed 0.1g per kg. The second is to weigh the weight. Generally speaking, a bucket of 5 liters of qualified emulsion paint is about 7 kg; A barrel of 18 liters is about 25 kilograms. Another simple method is to lift up the paint bucket. If the regular brand latex paint shakes, no sound can be heard. If the sound is easy to shake, the viscosity of the latex paint is insufficient. Three hands are hand can opening inspection. High quality emulsion paint is viscous, milky white liquid, without hard lumps, and it is uniform after mixing, without odor. Otherwise, it indicates that the emulsion paint has quality problems. It can also be evenly spread on the fingers to dry the conjunctiva in a few minutes. All the conjunctiva with certain ductility are reassuring coatings. Detail 2 Colorful color It should be noted that the color of latex paint is no longer the monotonous white before, and many consumers are more willing to light up their lives with colorful colors. On the color board and paint bucket, the color consumers see is not necessarily the same as the final effect on the wall. Because the color of the paint is affected not only by the light, but also by the painted area. When a color paints a large area, the color is usually accentuated, so you can choose a slightly lighter color.

label: Latex paint

What are the mistakes in purchasing latex paint? How to avoid?

What are the mistakes in purchasing latex paint? Many friends will choose latex paint when they are decorating, but there are too many products about latex paint on the market, and they often fall into the wrong area of purchasing latex paint. What are the wrong areas of purchasing latex paint? How to avoid? Mistake area 1 of latex paint selection: Many people tend to pay more attention to price than quality when choosing wall paint. Some people think that the higher the price of paint is, the better it is. So when choosing, they look for the most expensive one, but the experimental results show that this is not the case. The other extreme consumer is to save money. The lower the price, the better. This saves a lot of money, but the wall quality and indoor environment will be worried in the future. Therefore, it is recommended that everyone try to pay attention to the quality of wall finish while considering the price, and generally choose a reputable brand. 2： It is very necessary to pay more attention to the packaging while ignoring the internal consumers' choice of latex paint. However, it should be noted that the paint with good packaging may not be of good internal quality. In order to attract customers, some manufacturers make great efforts on the packaging of products and deliberately exaggerate the performance and efficacy of products. Therefore, it is suggested that consumers should pay attention to other aspects besides looking at the product packaging, such as looking at the detailed inspection sheet of the product. 3： The color card is completely consistent with the wall color. Many consumers think that the paint color on the color card is completely consistent with the color painted on the wall, which is a mistake. Because of light reflection and other reasons, after the four walls of the room are painted, the wall color will look darker than the color card. The color consumers see on the color card is usually different from the actual color behind the wall. Therefore, it is suggested that consumers should choose a slightly lighter color number when choosing colors from the color card. If they prefer dark walls, they can match the color of the selected color card. 4： Not estimating the amount of paint used in advance Many consumers do not estimate the amount of paint used in advance. They are afraid to buy less paint. When choosing, more is always better. This may cause waste of materials, increase the cost of home decoration, and at the same time, the accumulation of too much paint will also have a certain impact on construction safety. Therefore, it is suggested that consumers must look at the area of the construction area before construction, so as to estimate the amount of materials purchased. The simple method for estimating the amount of paint used is: the amount of paint required for one coat (L)=(wall area x2.5)/the area that can be painted per liter of paint. 5： Odorless means environmental protection. Many people judge the safety of wall paint by smelling the smell. They believe that low odor or odorless wall paint is environmental protection. This is a big mistake. Because odorless coatings can be achieved by adding flavor or using low-flavor materials, odorless coatings are not all environmentally friendly and non-toxic. The most professional way to judge the environmental protection of wall paint is to see whether its environmental protection indicators meet the standards. There are three key environmental indicators of wall paint: VOC, free formaldehyde and heavy metals.

label: Latex paint

What are the advantages of latex paint? How about air permeability?

What are the advantages of latex paint? Emulsion paint is a kind of water dispersible paint, which is refined by taking synthetic resin emulsion as the base material, adding various additives after the filler is ground and dispersed. What are the advantages of latex paint? How about air permeability? The first advantage of latex paint is that it is safe, non-toxic and tasteless, which completely solves the labor protection and environmental pollution problems caused by the volatilization of toxic gases of organic solvents among painters, and fundamentally eliminates the risk of fire. Advantages: convenient construction, which can be applied by brushing, roller coating, spraying, troweling, scraping, etc. Construction tools can be cleaned with water. Advantage 3: The coating dries quickly, and can be painted two or three times a day, so the construction efficiency is high and the cost is low. Advantage 4: good color retention and weather resistance. Most exterior wall latex white paint is not easy to yellowing, and the weather resistance can reach more than 10 years. Advantage 5: good air permeability, strong alkali resistance, so the coating is not easy to blister when the internal and external humidity difference is large, and the coating is not easy to "sweat" indoors, especially suitable for painting on the cement surface and plaster surface of the internal and external walls of buildings. Latex paint is widely used for interior and exterior wall decoration of buildings due to its wide variety of designs and colors, bright colors, light weight, and fast building decoration. Covering property: covering property and covering property are the components of high-quality latex paint, representing the painting work with better effect, less time consumption and less consumption. Adhesion and easy cleaning: good adhesion can avoid cracks and defects; Easy cleaning ensures gloss and color retention. Therefore, they are important reference indicators when you choose emulsion paint. Applicability: latex paint with good applicability will not cause bubbles to overflow and splash in the process of operation, and it will bring smooth walls to the room. Waterproof function: elastic emulsion paint has excellent waterproof function, preventing water from penetrating the wall and damaging the cement, thus protecting the wall, and has antibacterial function. It has good anti carbonization, antibacterial and alkali resistance.

label: Latex paint

How much do you know about the correct selection and purchase method of latex paint?

The wall is a very important decoration area of the entire interior space. Once a mistake occurs in a certain link of the wall decoration process, it will directly affect the decoration effect of the new house. As the most basic indoor wall decoration material, the performance of latex paint also determines the quality and beauty of the wall decoration. How much do you know about the correct purchase method of latex paint? Correct purchasing skills of latex paint 1. Try to choose a big brand with good reputation according to the brand. Of course, each brand also has different product lines, and you can choose according to your own budget. 2. According to the production date, the warranty period of latex paint is generally half a year to one year. It is suggested that consumers should check the production date and warranty period of the product when purchasing. The closer the production date, the better. 3. When looking at the environmental protection logo, pay attention to the manufacturer, trademark, anti-counterfeiting logo and certificate of conformity of the latex paint products, and indicate that the lead-free, mercury free, VOC and other indicators meet the standards and have the certificate of national environmental protection certification. Note 1 for purchasing latex paint: Focus on color value and price, but light quality. When purchasing latex paint, many consumers are easily attracted by its gorgeous appearance, ignoring the internal quality, or thinking that high price is good quality. In fact, this is a big mistake. In order to attract consumers to buy, many bad businesses will deliberately make a fuss on the packaging to exaggerate the efficacy of products; Or they can buy at a low price and sell at a high price. Therefore, when choosing, you must go to a regular brand store to buy, and you should also pay attention to checking the product details and the test sheet. 2： The color card is completely consistent with the color of the wall. The color of the latex paint on the wall is inconsistent with the color on the color card. The color of the latex paint on the wall will be darker than the color card under the effect of light reflection. Therefore, when choosing a color, consumers can choose a color number one lighter than their favorite color, so that there will not be too much difference when they go on the wall. 3： Not estimating the amount of paint used in advance Many consumers do not estimate the amount of latex paint required for wall decoration in advance before purchasing latex paint. It is also a big mistake to buy at will when purchasing. If you buy too much, it is easy to waste and increase decoration costs. 4： Odorless means that some low-quality latex paints of environmental protection products can remove pungent odor by using low-quality materials or adding flavor during processing. Therefore, odorless latex paints are not necessarily environmentally friendly.

label: Latex paint