When choosing latex paint, you should identify these four mistakes and stay away from inferior paint- How about China Resources paint emulsion paint

Is it good to install the integrated cooker? How to choose and purchase integrated stoves?

Is it good to install the integrated cooker? It is very difficult to choose household appliances freely in the decoration of kitchens, so some families can choose integrated stoves freely to avoid difficulties. How about installing integrated stoves? How to choose and purchase integrated stoves? Is the installation of the integrated cooker good? 1. The suction of the range hood: they all say that the suction of the integrated cooker is much better. Personally, I think the suction of the integrated cooker is not much different from that of the range hood. Of course, there is no test data, just a subjective feeling, and there is no doubt that different brands and models are different. It is often said that stir fried peppers cannot smell. Anyway, if my parents' kitchen door is not closed, they will still smell stir fried peppers, let alone stir fried peppers. This is a molecular movement. How can they not smell. 2、 Installation problem: The integrated cooker is of the bottom row type, and the holes in the public flue of general commercial housing are all on the top, so a new transformation is required to plug the holes on the top and open the holes on the bottom. The smoke pipe shall pass through the floor cabinet, and the floor cabinet shall be perforated. 3、 Space saving: The position of the integrated stove can save about one meter of cabinet money, and the upper position can be used as a wall cabinet to improve storage. That's right, but the integrated cooker is a lower exhaust pipe. The floor cabinet from the integrated cooker to the middle of the flue must be perforated through the flue, occupying the space inside the lower cabinet. there are both advantages and disadvantages. 4、 Price problem: most integrated stoves are integrated with cigarette machines, stoves and disinfection cabinets, so the price is generally high, which is equivalent to the price of three sets of first-line cigarette stoves, and may also be high. Another reason is that the sales volume of traditional cooker manufacturers is far higher, and the sales volume is better, so the cost will also decline. Of course, the pricing is not linear with the cost. However, the integrated cooker can save some money on cabinets. For users who do not need disinfection cabinets, it is equivalent to packaging and reselling disinfection cabinets. Of course, today there are also split integrated stoves. 5、 Service problem: The integrated cooker market is also a mixture of good and bad people, and there are few good after-sales services. For example, my parents' home is an unknown brand, and there was a repair in the middle. As a result, the factory found a third-party maintenance worker to serve, and the business is not very skilled. Before you buy, you can search the website for word of mouth and comments. 6、 Why don't brands of first-line stoves be manufactured? This is not a problem. The market share of the integrated cooker is too small compared with that of the cigarette machine cooker. Brands like Fang Tai and the boss are making good money when making cigarette machine cookers. Why invest money to develop another alternative product? Besides, this product is not subversive. 7、 Conclusion: The air outlet of the integrated cooker is closer to the lampblack, and theoretically, the suction will be better; Can save part of cabinet investment; The surface is easy to scrub; The price of integrated stoves is slightly higher; The installation will be more difficult than that of the cooker; Generally, the function of disinfection cabinet will be integrated. How to choose integrated stoves 1. The size of firepower depends on the suction. The selected air volume and air pressure are quite large, and the smoke exhaust effect is good. It depends on the fire power. The fire power is large and can be adjusted in a wide range to meet the needs of various cooking markets. Air volume and air pressure, the higher the air volume, the slower the kitchen smoke can be discharged. 2. Convenient cleaning silencer, easy to clean, some products have cleaning function. 3. The working noise cannot reach 60 decibels.

label: Integrated stove

What are the purchase items of integrated stoves in 2020?

What are the purchase items of integrated cooker? The integrated cooker's lampblack does not pass through the human face. If the quality and installation problems are eliminated, the lampblack removal rate will basically reach more than 95%, saving space, no meeting, no oil dripping, and no oil leakage. But many friends do not know how to choose. What are the options for the integrated cooker in 2020? The first choice of purchasing items for integrated stoves is to choose brands, which is a commitment. It expresses the history, scale, production capacity and user reputation of an enterprise. Whether an enterprise has the concept of "altruism" is related to whether it will consider more for our consumers. And good after-sales service is also an important guarantee for us to purchase products. First, look at the process. The process level of the product can best prove the quality management ability of an enterprise. The process should be seen in detail. Take the range hood for example, is there any defect on the panel surface? Are the corners smooth? Are keys, seams and screws handled perfectly? These best reflect the quality level of a product. (1) The most important technical parameters of suction integrated environmental cooker in terms of suction are air volume and air pressure. Air volume: Generally speaking, the larger the air volume is, the faster and timely the kitchen smoke can be exhausted. Under rated voltage and frequency, the integrated environmental cooker operates at the highest speed. In a specific test device, when the static pressure is zero, the corresponding exhaust air volume is not less than 21 square meters/min. Wind pressure: the greater the wind pressure value, the stronger the anti backdraft ability of the integrated environmental protection stove. The air pressure is an important indicator to measure the performance of integrated environmental cooker. If the exhaust pipe is long or connected to the public flue, due to the great loss of exhaust pressure, a larger air pressure is required to ensure the exhaust of flue gas. (2) The most important technical parameter of the environmental protection integrated environmental protection stove in environmental protection is the odor reduction degree. Odor reduction degree: under the specified test conditions, the ratio of the difference between the maximum odor concentration of the laboratory and the maximum odor concentration of the integrated environmental protection stove under working conditions to the maximum odor concentration of the laboratory. The higher the value, the better, which means better smoke exhaust effect. Experts suggest that a large number of thermal oxidation decomposition products will be produced after a series of complex changes of edible oil and food in the kitchen under high temperature conditions, some of which will be emitted into the air in the form of smoke to form kitchen smoke. The composition of lampblack gas is complex: there are more than 220 kinds of aldehydes, ketones, fatty acids, alcohols, aromatic fat compounds, lipids, lactones, heterocyclic compounds, etc., most of which are toxic. Therefore, in addition to paying attention to the suction, the odor reduction is also an extremely important reference when purchasing an integrated environmental cooker: it is a trial run on site, and you must operate it on your own site under the guidance of the manufacturer's purchasing guide. Open the prototype, feel the air volume and suction with your hands, and feel them at different heights; Listen to the noise. The key is whether there is noise. Noise is an important indicator to measure the performance of integrated environmental protection cooker. It refers to the A-sound power level measured by the specified method when the integrated environmental protection cooker operates at the highest speed under rated voltage and frequency. The national standard stipulates that the indicator value is not more than 74dB

label: Integrated stove

How to choose cabinet? How many shopping tips are there?

How to choose cabinet? Now many families will choose the cabinet, because the cabinet is really a necessary piece of furniture for the kitchen, but many friends do not know how to choose the cabinet, and how to choose the cabinet? How many shopping tips are there? How to choose a cabinet? Look at the edge sealing of the board. The edge sealing of high-quality cabinets is exquisite, smooth, and has a good feel. The sealing line is straight and smooth, and the joints are fine. Professional large factories use linear edge banding machine to complete the processes of edge banding, head breakage, trimming, chamfering, polishing, etc. at one time, to ensure the most accurate size. The workshop type small factory uses a brush to apply glue, press and seal the edges manually, use a wallpaper knife to trim the edges, and use a manual polishing machine to polish. Due to uneven pressure, many places are not firm, and harmful substances such as formaldehyde will volatilize into the air. 2、 Look at the punching. Panel furniture is assembled by three in one connectors, and the matching and precision of the hole position will affect the structural firmness of the cabinet box. 3、 Look at the cutting board. Cutting board is the first process of cabinet production. Large professional enterprises use electronic saws to input processing dimensions through computers, and the computer controls the dimensional accuracy of material selection, and can process several plates at a time. The performance of the equipment is stable, the dimensional accuracy of the plates produced is very high, and the tolerance unit is in microns. 4、 Look at the door panel. The door panel is the face of the cabinet, which is as important as the human face. The door panels produced by small factories are easy to be deformed due to moisture due to improper treatment of base materials and surface technology. 5、 See the assembly effect of the whole cabinet. Any dimensional error in the production process will be shown on the door panel. The door panel of the cabinet produced by a small factory will have uneven seams and uneven gaps, ranging from large to small. 6、 Look at the drawer slide. Although it is a small detail, it is an important part that affects the quality of the cabinet. Due to the error of hole position and size, there is an error in the fitting of slide rail installation size, which causes the drawer to pull unsmoothed or loose left and right. Pay attention to whether the drawer gap is even.

label: cupboard

What are the common problems of emulsion paint in construction?

Emulsion paint engineering is an indispensable process in home decoration. The following is a very simple study of several problems that may occur frequently to help people better control their own decoration. What are the common problems of latex paint in construction? Common problems in latex paint construction 1. The specific causes of wall cracking depend on the situation. If it is a GRC lightweight partition wall, the joints should be carefully treated to prevent cracking. Generally, glass fiber cloth or kraft paper is used. The partition board itself is prone to small cracks, so it is better to paste glass fiber cloth or beanbag cloth fully to ensure that there are as few cracks as possible in home decoration, In the case of load-bearing wall or solid wall, the reason for cracking may be that the construction putty is too thick or the putty is not dry after a short interval. In this case, there are many cases when the old house is transformed into leveling. 2、 Uneven wall patterns and colors are mainly due to the different colors of the base course, which have not been treated. This situation must be covered by full puttying or brushing a primer. In addition, when selecting materials, pay attention to selecting the same manufacturer, the same variety and the same batch number, otherwise there will be color difference. 3、 The main reasons for the rough surface are that the base treatment is not clean, the brush has sand, debris or the operating environment is not clean. The preventive measures include cleaning the base course, cleaning the brush, and dustproof the environment. 4、 The main reason for peeling is that the base course is too smooth or greasy. The preventive measures are to brush the base course with a steel brush and clean it. The greasy dirt is decontaminated with solvent.

label: Latex paint

What are the advantages of nano emulsion paint over traditional emulsion paint?

Latex paint has become one of the main choices for people's interior decoration, but the quality of various latex paints sold on the market is mixed. In recent years, the market has introduced a new generation of latex paint products. What are the advantages of nano latex paint over traditional latex paint? Advantages of nano emulsion paint 1. Utilize the double dispersion mechanism of nano materials to effectively discharge the moisture of the coating, prevent the invasion of external moisture, and make the film have the performance of breathing. 2. Using the special functions of nano materials and their micromolecular structure, the coordination reaction takes place with the inorganic silica and calcium of the wall, so that the wall and the coating film form a firm claw like permeability, so that the coating film will not fall off, not peel, and has high hardness and scrub resistance. 3. Using the physical property principle of super double interface of nano materials, effectively discharge the invasion of dust and oil, so that the wall has a good self-cleaning function. 4. Using the photocatalysis technology of nano materials, it can efficiently decompose and eliminate harmful gases in the air, reduce the radiation of decomposing ultraviolet rays, enhance the anti-aging ability of the coating, and have the performance of purifying the air. 5. Using the activation technology of nano materials, the Baoshilong nano coating can form an antibacterial coating that can destroy the cell membrane of Escherichia coli, Staphylococcus aureus and other bacteria, thus effectively killing or inhibiting the propagation of bacteria. 6. Unique environmental protection: produced at normal temperature and pressure, non-toxic, tasteless, pollution-free, water-soluble and environmentally friendly. 7. Extremely strong adhesion: it has strong adhesion to mortar, concrete, stone, asbestos board, wood, metal and other building materials. 8. Excellent high weather resistance: applicable to both south and north, high and low temperature. It can also be constructed on the wet foundation surface, and the frost resistant type can be constructed in the low temperature of 0-25 ο C, and stored without deterioration. 9. As the nanometer powder material is extremely fine (close to the molecular structure), it is difficult to disperse (always floating on the water surface), so that the coating can be easily dispersed in production, absorb and refract UVC ultraviolet rays, and have a service life of more than 10-15 years.

label: Latex paint

What are the common quality defects of latex paint painting?

Latex paint is one of the most widely used wall decoration materials at present. It has many advantages, such as convenient construction, strong hiding power, rich colors, scrub resistance, etc. But many friends said that there will be some problems with latex paint painting. What are the common quality defects of latex paint painting? Common quality defects of emulsion paint brushing (l) Blistering: the main reasons are improper treatment of the base layer, too thick coating, especially when the large core board is used as the base layer, it is easy to bubble. In addition to mixing the paint evenly before use and mastering the consistency of the paint solution, 107 glue can be brushed on the bottom putty layer before painting. When reworking and repairing, the blistering and peeling area shall be cleaned up, and 107 glue shall be brushed first before repairing. (2) Alkali removal and powder removal: the main reason is that the base course is wet before drying, and the main reason is that the sealing primer is not brushed and the paint is too thin. In case of anti alkali and powder loss, rework and recoat shall be carried out, and the coated materials shall be removed, and the construction shall not be carried out until the base course is completely dry. During construction, the sealing primer must be brushed first, especially for new walls, the consistency of the finish paint should be appropriate, and the white wall should be slightly thicker. (3) Falling: the main reason is that the viscosity of the coating is too low and the coating is too thick. During the construction, the consistency of the paint must be adjusted, and too much water cannot be added. During the operation, the pen must be dipped frequently, dipped less and smoothly to avoid sagging and flowing. In case of sagging, it is necessary to wait for the paint film to dry and then polish it with fine sandpaper. After cleaning the finish, it is necessary to apply a coat of finish paint. (4) Disclosure: mainly because the paint is too thin, the times are not enough or the material quality is poor. During construction, products with high solid content and strong hiding power shall be selected. In case of bottom penetration, the number of finishing coats shall be increased to meet the painting standard required for walls. (5) The coating is not smooth: the main reason is that the paint liquid has impurities, the paint liquid is too thick, and the quality of emulsion paint is poor. The brand with good leveling property shall be used during construction. Before the last coat of finish paint is applied, the paint solution shall be filtered before use. The paint liquid shall not be too thick. If the coating is not smooth, it can be polished with fine sandpaper before brushing the top coat. (6) Crack: the construction temperature is too low. The film forming temperature of the emulsion paint cannot be reached and the continuous film cannot be formed; Improper treatment of base course: such as coating film cracking caused by wall cracking; The second coat is applied when the first coat is too thick and not completely dry. Due to the different drying speeds inside and outside, the film cracks. Cracking of the applied cement putty causes cracking of the coating film. (7) Falling off: the main reason is that the emulsion paint fails to form a continuous film due to low construction temperature, which will fall off in case of water; The base course is loose, with greasy dirt and other dirt, and the coating film is not well adhered to the base course, resulting in peeling; The strength of base course puttying is low, and the putty layer is not completely dry, then latex paint is applied; The base course is too smooth, resulting in poor adhesion of the coating film. Spalling: prevention: first observe before construction, if there is leakage, ask the relevant department to solve it in time, and add special treatment. It is recommended to use a durable and waterproof bullet to pretreat the wall, and then paint it as usual. The wall must be cleaned during construction. (8) Discoloration and fading: some walls have high temperature, long sunshine time, or water-soluble salts crystallize on the surface of the wall, causing discoloration and fading of latex paint; Some walls contain too high alkali value, which infringes the weak alkali resistant pigment or resin and causes discoloration and fading; Do not use both latex and polyurethane paint at the same time. You can apply the latex paint two days after the paint is applied, or after the latex paint is completely dry (7 days at 25 ℃).

label: Latex paint

How to distinguish the quality of latex paint?

How to distinguish the quality of latex paint? When purchasing latex paint, you should choose the appropriate paint type according to your own needs. Don't blindly pursue "advanced" or be greedy for cheap. But many people can't distinguish the quality of latex paint when purchasing. How to distinguish the quality of latex paint? How to distinguish the quality of emulsion paint? First, look: the real emulsion paint looks tender and shiny. A thin emulsion agent similar to engine oil floats on the bucket. About one millimeter. Fake latex paint ticket is coated with thin water. And the paint belt has a blue head. Smell: the real latex paint has a light fragrance, accompanied by a similar earthy smell. The fake latex paint has a strong earthy smell or no smell. 3、 Wiping: the real emulsion paint is very delicate and smooth. The fake latex paint is astringent and grainy. 4、 Brush: The real latex paint is smooth and has strong covering power. The fake one has no covering power, and it doesn't have too much hardness after drying. 5、 Pull: Take a small stick and stick it with emulsion paint. It is better to hang long wires and keep falling evenly. 6、 Try: stick the latex paint with your fingers and twist it, without the roughness of sand particles. The leveling performance of the paint with water flushing is slippery. Use a stick or spoon to stir the paint evenly, and then lift the spoon to a high place. Observe the posture of the paint flowing down. If the paint falls in blocks, the leveling performance is not good. If the paint falls in a linear way, This indicates that the coating has a certain leveling performance. Secondly, the paint shall be mixed with water according to the proportion in the construction manual, and coated on the nonabsorbent surface with a stiff brush. After it is dry, the smoother the film surface, the better the leveling performance.

label: Latex paint

What details should be paid attention to when purchasing latex paint

What details should be paid attention to when purchasing latex paint? The details determine the quality. If you want to choose the latex paint that is most suitable for the house decoration style, there are still many details to pay attention to when purchasing the latex paint. What details should we pay attention to when purchasing latex paint? Let's get to know with the editor! The details of latex paint purchase 1. Look at the packaging and environmental protection test report. Generally, the front of latex paint will be marked with name, trademark, net content, composition, use method and precautions. Pay attention to the production date and warranty period. The warranty period marked by each brand of latex paint varies from 1 to 5 years. General brand latex paint has environmental protection test report or test sheet. Consumers can have a detailed understanding of the environmental protection performance of latex paint when they see the test sheet clearly. The test report has standards for the test results of VOC, free formaldehyde and heavy metal content. National standard VOC shall not exceed 200g per liter; Free formaldehyde shall not exceed 0.1g per kg. The second is to weigh the weight. Generally speaking, a bucket of 5 liters of qualified emulsion paint is about 7 kg; A barrel of 18 liters is about 25 kilograms. Another simple method is to lift up the paint bucket. If the regular brand latex paint shakes, no sound can be heard. If the sound is easy to shake, the viscosity of the latex paint is insufficient. Three hands are hand can opening inspection. High quality emulsion paint is viscous, milky white liquid, without hard lumps, and it is uniform after mixing, without odor. Otherwise, it indicates that the emulsion paint has quality problems. It can also be evenly spread on the fingers to dry the conjunctiva in a few minutes. All the conjunctiva with certain ductility are reassuring coatings. Detail 2 Colorful color It should be noted that the color of latex paint is no longer the monotonous white before, and many consumers are more willing to light up their lives with colorful colors. On the color board and paint bucket, the color consumers see is not necessarily the same as the final effect on the wall. Because the color of the paint is affected not only by the light, but also by the painted area. When a color paints a large area, the color is usually accentuated, so you can choose a slightly lighter color.

label: Latex paint

What are the mistakes in purchasing latex paint? How to avoid?

What are the mistakes in purchasing latex paint? Many friends will choose latex paint when they are decorating, but there are too many products about latex paint on the market, and they often fall into the wrong area of purchasing latex paint. What are the wrong areas of purchasing latex paint? How to avoid? Mistake area 1 of latex paint selection: Many people tend to pay more attention to price than quality when choosing wall paint. Some people think that the higher the price of paint is, the better it is. So when choosing, they look for the most expensive one, but the experimental results show that this is not the case. The other extreme consumer is to save money. The lower the price, the better. This saves a lot of money, but the wall quality and indoor environment will be worried in the future. Therefore, it is recommended that everyone try to pay attention to the quality of wall finish while considering the price, and generally choose a reputable brand. 2： It is very necessary to pay more attention to the packaging while ignoring the internal consumers' choice of latex paint. However, it should be noted that the paint with good packaging may not be of good internal quality. In order to attract customers, some manufacturers make great efforts on the packaging of products and deliberately exaggerate the performance and efficacy of products. Therefore, it is suggested that consumers should pay attention to other aspects besides looking at the product packaging, such as looking at the detailed inspection sheet of the product. 3： The color card is completely consistent with the wall color. Many consumers think that the paint color on the color card is completely consistent with the color painted on the wall, which is a mistake. Because of light reflection and other reasons, after the four walls of the room are painted, the wall color will look darker than the color card. The color consumers see on the color card is usually different from the actual color behind the wall. Therefore, it is suggested that consumers should choose a slightly lighter color number when choosing colors from the color card. If they prefer dark walls, they can match the color of the selected color card. 4： Not estimating the amount of paint used in advance Many consumers do not estimate the amount of paint used in advance. They are afraid to buy less paint. When choosing, more is always better. This may cause waste of materials, increase the cost of home decoration, and at the same time, the accumulation of too much paint will also have a certain impact on construction safety. Therefore, it is suggested that consumers must look at the area of the construction area before construction, so as to estimate the amount of materials purchased. The simple method for estimating the amount of paint used is: the amount of paint required for one coat (L)=(wall area x2.5)/the area that can be painted per liter of paint. 5： Odorless means environmental protection. Many people judge the safety of wall paint by smelling the smell. They believe that low odor or odorless wall paint is environmental protection. This is a big mistake. Because odorless coatings can be achieved by adding flavor or using low-flavor materials, odorless coatings are not all environmentally friendly and non-toxic. The most professional way to judge the environmental protection of wall paint is to see whether its environmental protection indicators meet the standards. There are three key environmental indicators of wall paint: VOC, free formaldehyde and heavy metals.

label: Latex paint

What are the advantages of latex paint? How about air permeability?

What are the advantages of latex paint? Emulsion paint is a kind of water dispersible paint, which is refined by taking synthetic resin emulsion as the base material, adding various additives after the filler is ground and dispersed. What are the advantages of latex paint? How about air permeability? The first advantage of latex paint is that it is safe, non-toxic and tasteless, which completely solves the labor protection and environmental pollution problems caused by the volatilization of toxic gases of organic solvents among painters, and fundamentally eliminates the risk of fire. Advantages: convenient construction, which can be applied by brushing, roller coating, spraying, troweling, scraping, etc. Construction tools can be cleaned with water. Advantage 3: The coating dries quickly, and can be painted two or three times a day, so the construction efficiency is high and the cost is low. Advantage 4: good color retention and weather resistance. Most exterior wall latex white paint is not easy to yellowing, and the weather resistance can reach more than 10 years. Advantage 5: good air permeability, strong alkali resistance, so the coating is not easy to blister when the internal and external humidity difference is large, and the coating is not easy to "sweat" indoors, especially suitable for painting on the cement surface and plaster surface of the internal and external walls of buildings. Latex paint is widely used for interior and exterior wall decoration of buildings due to its wide variety of designs and colors, bright colors, light weight, and fast building decoration. Covering property: covering property and covering property are the components of high-quality latex paint, representing the painting work with better effect, less time consumption and less consumption. Adhesion and easy cleaning: good adhesion can avoid cracks and defects; Easy cleaning ensures gloss and color retention. Therefore, they are important reference indicators when you choose emulsion paint. Applicability: latex paint with good applicability will not cause bubbles to overflow and splash in the process of operation, and it will bring smooth walls to the room. Waterproof function: elastic emulsion paint has excellent waterproof function, preventing water from penetrating the wall and damaging the cement, thus protecting the wall, and has antibacterial function. It has good anti carbonization, antibacterial and alkali resistance.

label: Latex paint