Correct use of the electromagnetic pulse valve

The correct use of Pincheng electromagnetic pulse valve: the electromagnetic pulse valve controls the opening and closing of the unloading hole of the valve body according to the electrical signal. When the valve body unloads, the pressure gas in the cavity behind the valve is discharged, the pressure gas in the cavity in front of the valve is throttled by the negative pressure hole on the diaphragm, the diaphragm is lifted, and the pulse valve is injected. Electromagnetic pulse valve It is generally installed in the main oil circuit or the shock absorber back pressure oil circuit to reduce the oil pressure impact during gear shifting and lock unlocking, so that the equipment can operate stably. Electromagnetic pulse valve The flow characteristics of the electromagnetic pulse valve refer to the relationship between the pressure drop at both ends of the inlet and outlet of the electromagnetic pulse valve and the flow through the element.
The pressure range of the pulse valve shall be at least 1-8kg/cm2. In this way, if the resistance of the filter material increases with time in the application process, the pressure of the air bag can be adjusted to maintain the good running resistance of the precipitator, so as to ensure that the filter material will not be stuck. Therefore, when selecting the electromagnetic pulse valve, we should recognize the brand. Electromagnetic pulse valve Also called Diaphragm valve , is the compressed air of the dust cleaning injection system of the pulse bag filter“ switch Under the control of the output signal of the pulse injection controller, the filter bags are blown out row by row (room) to keep the resistance of the dust remover within the set range, so as to ensure the processing capacity and dust collection efficiency of the dust remover.

This article comes from: http://www.pcjxcc.com/diancimaichongfa/dcmcf.html