According to statistics, less than 30% of the people in the mainland of China can be regarded as real "healthy" breathing people, and nearly 70% of the people breathe harmful gases every day! Air pollution not only makes adults suffer, but also brings greater pain to children, and family health and harmony are also seriously affected. However, facing the problem of "healthy breathing", where should we go.. Today, the domestic manufacturer of * * * air purifier, Suzhou Purification Equipment Co., Ltd., answers how to breathe healthily and purify harmful substances in the air healthily.
In daily life, industrial production discharges a wide range of pollutants into the atmosphere, including smoke, sulfur oxides, nitrogen oxides, agricultural production system compounds, halides, carbon compounds, etc. Some of them are smoke and dust, and some are gas.
A series of solder smoke filters have been successfully developed: solder smoke purifier, dust recovery system, metal powder collection system, odor elimination system, corner cutter. With the characteristics of energy saving, power saving, high purification rate and low cost, it is favored by users at home and abroad; Most of the purified air does not need to be discharged outside, thus reducing the energy consumption of the refrigeration equipment, improving the air quality and reducing the total electricity consumption, reducing the harm of air pollution to employees' health, and reducing the damage to the environment.
Special use system of solder smoke purifier --- GF-001 GF-002 GF-003 GF-004
Solder smoke purifier is specially designed door The product designed for the smoke treatment of electronic soldering operation will produce smoke and dust harmful to human health during the high temperature tin melting process through the soldering iron tip of the soldering station and the tin wire, and some dust particles, smoke and gas will be directly inhaled into the lungs, thus affecting the health of employees. The application of the solder smoke purifier can not only ensure that the working environment meets the standards of all health and safety regulations, It can effectively reduce the production cost, and provide an ideal solder smoke purification scheme according to the special needs of users.
Production and hazard of solder fume:
5% carbon monoxide, carbon dioxide, methanol , ethanol , formaldehyde, etc
95% from particles produced by solder
These pollutants will cause great harm to operators and the environment
Problems that may occur when working in such a long time under the environment of solder smoke:
Detailed introduction of solder smoke purifier:
*Integrated structural design of smoke filtration, simple installation, flexible movement, no need to lay smoking The Conduit 。
*High power DC brushless electric machinery Long service life, low noise and high air flow.
*The triple filtration design of smoke filtration ensures that harmful substances in the smoke are filtered out and human safety is protected. The primary filter, medium efficiency filter and main filter can be replaced separately, which can make full use of the filter and reduce the production cost.
*The built-in smoke filtering circulating air filtering method avoids discharging the indoor air conditioner/heater to the outside.
*Multi position design, adjustable air volume, flexible smoking arm can be adjusted freely.
Recently, Mr. Yin, the buyer of Suzhou Yamaha Group, talked about the problem of solder smoke pollution with employees in the factory. He had never been shy to say it before, but when everyone said it, they all coincidentally expressed their depressed applications. Only when Wang realized that Yamaha Group was not the only enterprise with the problem of solder smoke pollution, like us, we worked in the factory assembly line every day, They all belong to sub-health, with ten men and nine diseases. In addition, the pressure of work is very high. They have been busy and nervous. They want to relax after returning home, but they just feel tired and sleepy. Not only can they not help their wife take care of their children's housework, but their body cannot make up for their mistakes due to a large amount of solder smoke inhalation.
In fact, many factories have the problem of industrial smog, but not all people will talk about it. It is a serious industrial smog pollution. Inhaling the smog for a long time causes various discomfort to the body. This disease not only greatly affects my working state, but also makes employees depressed in many hours, and their work performance has declined a lot, President Wang of Suzhou Yamaha Group later found many ways to rectify the industrial pollution in the factory, but the effect was not obvious. Later, he learned about the solder smoke purifier under the introduction of an old friend, who recommended it to her at that time, It was said that this purifier was based on the principle of completely purifying the particles and toxic and harmful gases in the solder smoke, and could purify the solder smoke pollution in the factory as a whole. At that time, I learned about this solder smoke purifier on the website, and checked the reputation of this solder smoke purifier on the Internet. I felt that it was still very reliable, so I bought 20 sets, After using it for two months, I felt that the effect was pretty good. The employees' energy state was much better. The feedback from the employees was also very good. After using it up for two months, President Wang bought 30 industrial smoking machines to expand the purification range. Now the factory staff are really in high spirits.
Photos of on-site solder smoke purifier in Yamaha Factory:
Advantages of solder smoke purifier:
Highlights of Solder Smoke Purifier:
Brushless motor: low noise, high speed, stable operation, long service life, low power consumption, high efficiency (zero maintenance and zero consumables of motor).
Special alloy vortex metal wind wheel design: fatigue resistant, stable operation, low noise, high air volume, large suction force, and high smoking efficiency.
Various product stations: from single station to multiple 6-station designs, you can choose at will.
Potentiometer installed for each model: air volume can be adjusted at will
Multi stage filtration design: ensure the complete filtration of harmful substances in the smoke, protect the environment and human health.
The primary efficiency, medium efficiency and main filter elements can be replaced separately, which extends the service life of the filter element and reduces the use cost of the filter element.
It has the function of sound and light start emergency signal for filter element blockage: prompt replacement in time.
Universal bamboo joint pipe: the smoking pipe can change direction and position at will, and the installation is simple and convenient, without additional pipes, which is conducive to the cleanness and beauty of the working space.
Sheet metal shell: all metal frame structure design, which can resist strong impact and vibration.
Casters installed at the bottom: easy to move (except GF-001 GF-002).
Working principle diagram of solder smoke purifier:
Filtration principle Polluted air → Primary filtration → Medium filtration → Activated carbon filtration → Filtration → Clean air
Product:
Single station solder smoke purifier:
Double station solder smoke purifier:
Specification parameters of solder smoke purifier:
Example drawing of solder smoke purifier:
Installation diagram of four stations of solder smoke purifier:
Installation diagram of six station solder smoke purifier:
Honorary customers of solder smoke purifier:
Installation diagram of solder smoke purifier:
Notice on purchase of solder smoke purifier:
1. As the solder smoke purifier adopts a simple design, it is easy to install, without technical components, and the installation difficulty is the same as that of the mobile phone battery. You can install it with a little common sense!
2. The installation method is: unpack the package, take out the accessories, remove the filter element protective pad, cover the sealing cover, connect the smoking pipe, seal all the joints, plug in the power supply, and then it can be used normally.
3. If other or special installation methods are required, please solve them by yourself (can be completed by the company's water electrician), and only provide installation suggestions and guidance.
4. If the Seller is required to be responsible for the installation, the Buyer must pay 200 yuan for the installation of each station (including the reserved station). The vehicle handling fee and material cost shall be subject to the actual situation. Before installation, the Seller shall provide detailed construction drawings, dimensions and corresponding materials.
Notification obligation:
For your health and rights, please read this article
The solder smoke purifier is not an exhaust fan, but intercepts and collects smoke and harmful gases through the "filter element". Therefore, the filter element will be saturated, which is commonly known as "blockage". Therefore, timely and accurate replacement of the filter element is the key to effectively purify smoke and dust, so as to reduce the harm of smoke to human beings and the environment, (The purifier that does not need to change the filter element is an exhaust fan, which cannot be matched by the current technology); The smoke purifier is a relatively special product, so it needs your full cooperation to be able to use it effectively. You need to pay attention to the following points:
1、 The distance between the smoking hood and (smoke producing point) directly affects the smoking effect - it is recommended that the distance between the smoking hood and the smoke producing point should be kept at about 10-15cm.
2、 The surrounding of the smoking hood (air flow) directly affects the smoking effect - Suggestion: adjust or even close the wind direction of the fan or air conditioner outlet that generates air flow around the smoking hood; You can also make a sealing cover to block the influence of air flow on smoking effect.
3、 The longer the pipe of the smoking pipe, the weaker the smoking effect - it is recommended that the branch pipe of the smoking pipe should be within 1.2 meters as far as possible.
4、 The more the bend of the pipe, the worse the smoking effect - Suggestion: reduce the bend. If the bend is unavoidable, try to increase the extent of the bend.
5、 If you do not use according to the "requirements", do not replace the filter element "on time", or use a "low-quality" filter element, our company will not be responsible for the reduced suction, equipment damage, early scrapping of the main filter element, as well as the pollution and damage to human body and the environment!
After sales guarantee of solder smoke purifier:
1. The company will bear all the freight for the products sold.
2. The company's products are packed in safe cartons, suitable for long-distance transportation.
3. The warranty period of the equipment sold by the company is one year, including two years for the motor. There is no charge for after-sales maintenance and care within the warranty period (including labor costs, spare parts costs, etc.) (excluding human factors and consumables).
4. Without affecting the second sale, all products sold by the company will be unconditionally returned within seven days, and no return will be given beyond seven days. The Buyer shall bear the freight if returned.
5. The company guarantees that all equipment sold is free from any defects and defects in design, processing, materials and use, and the accessories are complete.
For you
