250a Electric welding Quotation of argon arc welding integrated machine/TO250A 250A The electric welding machine for power generation can match with various advanced wire feeders in the world, and semi-automatic welding is good. Complete equipment and instruments, equipped with fuel saving Solenoid valve High and low current Selector switch The machine oil starts the emergency annunciator and other devices, which are light in weight and easy to move, and especially suitable for high-quality welding in high, dangerous, and wet environments. The circuit device of the control box is relatively complex, and attention should be paid to protecting the circuit facilities from being damaged by touching during use. When the temperature is low in winter, thyratron and pilot pipe are not easy to ignite. The indoor temperature shall not be lower than fifteen ℃。
After the welder stops working, sundries and welding slag splashes must be removed.
When the welding machine stops working, it should be cut off first Power Supply , gas source, and then close the water source.
If the welding machine is out of service for a long time, anti rust grease must be applied on the unpainted moving parts to prevent parts from rusting.
If the control box is out of service for a long time, it should be electrified and heated every month to prevent moisture immersion thirty Minutes. If the thyratron is replaced, it should also be preheated thirty minute. The preheating of the control box for normal operation shall not be less than five Minute, otherwise it is easy to cause reverse arc or out of control. 250a diesel electric welding machine alternator Group adoption As the original power, the Japanese four stroke generator has the characteristics of energy saving, lightweight body, simple use, long service life, excellent electrical performance, and load voltage waveform distortion less than 5% Other indicators also far exceed the national standards, which can meet the needs of equipment with high requirements for power quality. Electric welding machine for power generation | The gasoline engine or diesel engine is used as the power for rotating power generation, and the DC power for welding is provided through the rectifier module. It is also called power generation and welding dual-use machine, which can be used as a generator and also as an electric welding machine. Advantages: integrated power generation and welding, light weight, convenient movement. Daze power generation welding unit, powerful and advanced AVR Module, unique power generation system, light weight, small size, easy to move, suitable for municipal engineering emergency repair and field work emergency, both electric welding and power generation, one machine for multiple purposes, service life twenty In, Daze power generation electric welding machine adopts brushless excitation structure with exciter, so the welding current is stable, the spatter is small, and the weld junction is smooth. Tight double characteristics AVR The welding current adjustment range is large enough to meet various welding process requirements. Ozawa Power originates from Japan.
[Company name]: Shanghai Oubao Industrial Co., Ltd
[Brand name]: Daze Power
[Sales Manager]: Zhang Meals
[Contact number]: ***
[Straight line seat phone]:***
[E-mail]: ***@139.com
[Online buckle]: 958648472
[Address]: No. 5517-5518, Puwei Road, Zhuangxing Town, Fengxian District, Shanghai
[Transaction mode]: Alipay transaction under purchase and sale contract
[Transaction Mode]: transfer, Alipay, cash, check, swipe card;
[About products]: including 17% of VAT, excluding freight, 24 hour logistics delivery nationwide.
[Reason for recommendation]: The manufacturer's direct sales warranty is one year to maintain the stability of the national joint guarantee import technology.
Ozawa Power TO250A -Diesel electric welding machine
|
Product No
|
TO250A
|
style
|
Hand push
|
brand
|
Ozawa Power
|
Rated output HP
|
twenty
|
Insulation class
|
F
|
Falling characteristics of electric welding machine
|
Single handle current regulation range
|
0-250A
|
No load voltage
|
65V
|
working voltage
|
22-30V
|
Load duration
|
high standard
|
Applicable welding rod φ mm
|
2.0~5.0
|
Auxiliary power of electric welding at the same time
|
Rated output KW
|
five
|
Large output KW
|
six
|
alternator
|
Rated voltage V
|
220 (380V optional)
|
Fuel consumption
|
205g/kw.h
|
Power factor%
|
one hundred
|
working condition
|
continuity
|
engine
|
name
|
192F(YOTOTI)
|
Engine type
|
Single cylinder in-line four stroke air-cooled diesel engine
|
Number of cylinder blocks
|
one
|
Exhaust volume
|
420CC
|
Rated speed rpm
|
three thousand
|
Startup mode
|
Manual start | electric start
|
Fuel model
|
No. 0 diesel (summer) - No. 10 diesel (winter)
|
other
|
Operating ambient temperature ℃
|
-20~40
|
Oil tank capacity L
|
twenty
|
Larger size mm
|
770*510*660
|
Net weight Kg
|
one hundred and twenty
|
Noise dB
|
seventy
|
Oil volume
|
1.05L
|
Continuous operation
|
12H
|
Many customers are easy to ignore two points when choosing electric welding machines for power generation: one is useful , II. Cost !
You use it at home. Why do you want to buy a generator welder? The electric welding machine for power generation uses fuel oil, and the welding cost must be higher than that of ordinary electric welding machines! Although I sell internal combustion electric welding machines, I will also tell you to use electric welding machines at home: you must buy them!
All the engineering customers, * * * bureaus and other departments buy power generation and welding integrated dual-use machines! Others chose it because of the mobility of the electric welding machine for power generation, which is used for outdoor emergency repair construction!
Advantages of Daze: integrated power generation and welding, light weight, convenient movement, fast start, stable operation, small vibration, low fuel consumption, small size, etc. Save more fuel than ordinary energy 20% ; Equipped with high-quality self excitation or permanent magnet motor, it can provide stable voltage anytime and anywhere.
Better eat a peach than a basket of rotten pears! Daze mobile power generation welding machine is the best choice for water conservancy department and emergency department !
1、 After sales service provided by Daze Power Generator
one Consulting service: Users can call the toll free hotline if they encounter any problems during use: *** two Replacement service: If the quality problem of the products within the replacement period is caused by the manufacturer, the user can Daze manufacturer is free to update ( Appearance damage, warranty treatment ) 。
three Warranty service: In case of quality problems of products within the warranty period, users can go to the local after-sales service center to enjoy warranty service ; There is no local after-sales service center, users can entrust Daze specially appointed maintenance points to provide warranty services.
four Maintenance service: products within the maintenance period , In case of quality problems, the user can go to the local after-sales service center or entrust Daze special maintenance station requires maintenance services.
2、 From the date of purchase, if the product has quality problems under normal use:
one complete machine seven The quality problem is guaranteed to be replaced within one day, free warranty within one year (power, motor), and lifelong maintenance.
two Three month free warranty for damage of vulnerable parts.
be careful:
one The purchase date shall be subject to the date of purchase amount certificate ( No purchase amount certificate, subject to the delivery date ) 。
two The quality problem does not include the user's personal subjective objection to noise, beauty, etc.
four Replacement and warranty services are only valid for general use: all man-made damages ( For example, users dismantle the machine by themselves
Proper operation, etc ) . Damage caused by transportation and other accidents, force majeure such as natural disasters, repair and modification not recognized by the company are not included in the scope of replacement guarantee and free warranty ; The maintenance service shall be charged appropriately.
five The company only performs functional repair for the service of discontinued products ( The appearance may be different from the original product )
six The warranty service does not include the case, instructions, and packaging
3、 Please bring the original warranty card or purchase amount certificate when requesting service. Please properly keep the warranty card and purchase amount certificate. The warranty card shall not be altered, or it will be invalid.
4、 Please read the product manual carefully before using Daze power generator
( Note: The company reserves the right to final interpretation of the after-sales service regulations of the product )