Supply 300A argon arc welding power generation Electric welding Imported electric welding machine
type number TOTO300AE
electric weld Machine:
Rated current : 300A
Current regulation : 0-300A
Rated voltage : 26-30V
Electrode diameter : 0-4.0mm
Continuous load : full
argon arc Welding:
No load voltage : 295V
Rated current : 15-60A
welding wire : 1.0-1.5-2.0-2.5mm
hold Continued rate : 60%
Protection grade : IP22
Arc starting mode : Grounding and arcing
hair electric Machine:
Rated output : 6KW
Rated voltage : 380V
frequency rate : 50HZ
structure type : open-shelf | Hand push
Rated speed : 3000/3600rpm
Insulation class : F
Engine model : 192FA
Fuel type : ninety Gasoline above
Oil type : SF Grade I steam engine oil in summer 15W/30 winter 10W/30
engine type : Single cylinder, four stroke, air-cooled, engine
Row amount : 420(CC)
hair move Machine:
Engine model : 192F
working hours : 8-12h
oil Consumption : 395 g/kw.h
Oil tank volume : 15L
Oil capacity : 1.1L
Machine parameters:
Protector : yes
long wide high : 850*650*780 ( mm )
clean heavy : 100/110 ( kg )
prepare notes : Pictures are for reference only Refer to the actual product
Oubao gasoline/diesel alternator Because of its small size, light weight, simple operation, convenient mobility and other characteristics, it is widely used in telecommunications, capital, hospitals, stores and other industries. with Diesel generator set Similarly, in addition to correct operation, all components of the gasoline generator must be systematically and carefully inspected, adjusted and cleaned regularly to prevent various failures caused by early wear and tear, establish the use record of the unit, and strictly record all data in use, especially each use time. The accumulation of service time is an important basis for maintenance.
Oubao power generation electric welding machine nationwide pin Measure forward.
1. Specially designed for the needs of field welding construction and maintenance door Design, manual/argon arc welding
2. The imported European Power TO diesel engine is used, which has strong power and stable operation, and can greatly save fuel cost in construction
3. The 380V power supply can be directly connected externally, and normal welding can still be carried out without starting the diesel engine
4. Suitable for backing, filling and covering of ordinary electrode, low hydrogen down welding and cellulose electrode
5. Equipped with AC 220V, 380V, as the power supply for flaw detection, water pumping, electric tools, lighting and other equipment
Large welding rod for power generation/welding machine can be used up to φ 5mm
One machine is dual-use, small and light
Suitable for field pipeline and urban municipal construction