major component
Major achievements Membrane material Water soluble polymer ethylene Alcohol, one component silicone modified acrylic resin , pigment, by adding Thickening agent , moisture agent, fine filler , hardener, etc.
Technical advantages
Porcelain coating, through a simple spraying process, forms a wall like a ceramic tile without joints. The bright and clean light reflection performance fully refracts the light, and greatly improves the illumination and brightness in the tunnel with low cost. Porcelain coating improves the driving environment of the tunnel, reduces the light difference inside and outside the tunnel, and reduces the probability of traffic accidents caused by light at the tunnel entrance.
Problems solved
Porcelain coating forms a wall like an integral jointless ceramic tile through a simple spraying process. Its smooth surface refracts the light. The low cost makes the illumination in the tunnel instantly increase by 3 times
Main characteristics:
1. Industrial protective and decorative finish with good performance *
2. Matte or highlight, good fullness
3. Low light loss rate due to prolonged exposure, good color retention, and no trouble with yellowing.
4. Good resistance to harsh weather, abrasion resistance, chemical resistance and solvent resistance.
Concrete surface:
The surface shall be flat, solid, free of oil stain, poor hardening, loose pulverization, pockmarks, peeling, sanding, etc. The water content and the departure rate shall be less than 8%, and the PH value shall be less than 8
Main technical indicators
Matching coating: Water based porcelain primer
Construction method
The product can be constructed in the following ways
Spraying: air spraying.
Brush coating: recommended for pre coating and small area coating. Take care to achieve a specific dry film thickness.
Storage
It must be stored in accordance with national regulations. The storage environment should be dry, cool, well ventilated, and away from heat and ignition sources. The packaging container must be kept closed.
Shelf life at 23 ℃
Component A 12 months
In some markets, in order to adapt to local laws and regulations, the shelf life of the logo can be shortened. The above is a short shelf life, and then it must be tested to determine whether the quality is qualified
matters needing attention
This product is only for professional use. Constructors and workers need training, experience, ability and equipment to correctly mix/mix and apply paint according to technical documents. Constructors and workers need to use appropriate personal protective equipment when using this product. This guide is based on existing product knowledge.
Health and Safety
Use under well ventilated conditions to avoid inhalation of paint mist and contact;
If it is accidentally splashed, it should be immediately washed with appropriate detergent, soap and water. If it enters the eyes accidentally, it should be fully washed with water and seek medical treatment immediately
Test report of Hunan Province:
Field inspection report of Guizhou Province:
