Magnetic control built-in shutter Glass Product Introduction
Built in louver Hollow glass , is to install the aluminum shutter in the middle cavity of the insulating glass, and realize the folding, unfolding and dimming functions of the built-in shutter through magnetic drag. The technology integrates external shading device, insulating glass, indoor window curtains As one, it has the effect of "one has four gains". Firstly, the problem of complex installation of external shading device and its influence on building effect is solved; Secondly, the 19mm and 21mm super large insulating glass air layers greatly improve the thermal insulation, sound insulation and noise reduction of insulating glass; Once again, the indoor blinds are built in to solve the problem of difficult cleaning and easy damage of indoor curtains. The angle of the built-in blinds can be adjusted at will, creating a comfortable, warm and beautiful space for the interior.
L Product features:
1、 Easy to operate:
The magnetic control handle can be easily pulled up and down for easy operation;
2、 Easy to clean:
Double insulating glass Built in shutter, clean and transparent, easy for housewives to clean;
3、 Privacy design:
The blinds can be flipped at various angles, allowing sunlight to come and go freely;
4、 Sound insulation and radiation insulation:
The super large insulating glass air layer acts as the transmission of noise. With built-in louvers, the sound insulation effect is better,
5、 Heating and insulation:
Different turning angles of the blinds allow convenient sunlight exposure. In winter, the blinds are closed, and the sunlight penetrates the glass to gather heat indoors, playing a heating role. At night, the blinds can be fully unfolded, reducing heat loss, and playing a heat preservation role;
6、 Sun shading and heat insulation:
Aluminum magnesium louvers can rent direct sunlight, effectively reflect the far-infrared ray of surrounding objects to the interior, and play the role of shading. The super large air layer can effectively block the indoor and outdoor heat transfer, and block the formation of air convection, which is the key point that people give priority to;
L Product details
1. Product specification:
1.1 5 19A 5, 5 19A 6 (external); (12.5mm louver)
1.2 5 21A 5, 5 21A 6 (external); (12.5mm, 15mm louver)
1.3 5 23A 5, 5 23A 6 (outside) (12.5mm, 15mm louver)
1.4 5 3 high 5, 5 3 high 6 (outside) (12.5mm, 15mm, 25mm louver)
Note: 5mm and 6mm are commonly used Tempered glass The glass can also choose Low-e high permeability, low permeability glass or laminated glass. Select according to different needs.
2. Product series:
2.1 Single handle series, double handle double control series;
2.2 Door and window series, office partition series;
3. Transmission system:
3.1 The transmission system is independently developed, with low noise and strong sound insulation, which has greatly improved the quality of the living environment;
3.2 Through magnetic control stretching, the handle design is light, easy to install and stretch freely;
3.3 Humanized design, each size has been carefully designed by us to meet the needs of ergonomics;
4. Profile requirements:
4.1 The total thickness of the finished insulating glass with built-in louver is>=30mm. Therefore, the width of the notch of the door and window profile is required to be>=32mm. If you don't know about it, please call the company for consultation.
4.2 The built-in louver insulating glass fixed and side hung doors and windows are suitable for more than 50 series profiles, and the sliding doors and windows are suitable for more than 100 series profiles. In special cases, the width of the bead (line) can be reduced to meet the space required by the built-in louver insulating glass.
5. Product size:
5.1 The larger size of the louver: 1500mm X 2200mm, the larger size of a single louver shall not exceed 2 square meters, and the larger size of a double louver shall not exceed 4 square meters;
5.2 Smaller size of louver: 300mm narrower in width;
6. Scope of application: high residential buildings, small buildings, villas, hotels, office buildings, partitions, public buildings, sunshine rooms, curtain walls, etc
7. Technical support: The company has a strong technical team to provide partners with the following services:
7.1 Overall energy conservation scheme and thermal calculation scheme of the building;
7.2 Design and product development technology of built-in louver insulating glass system;
7.3 Design and construction technology of built-in louver insulating glass system;
7.4 Product accessories of built-in louver insulating glass system shall be supplied.
8 Customized instructions:
8.1 Product color: customer customized color is acceptable, but the delivery period is extended by 5-10 days, and the cost is increased appropriately.
8.2 The company's stock colors are: white, gold, wood grain, coffee grey, champagne, etc. The specific color samples can be viewed on the company's website
8.3 Supply period: 5-15 days
8.4 Acceptable ordering area: national area
8.5 Packing instructions: wooden frame/wooden box, carton, pearl sponge.
Nanjing Ruigu Energy Saving Technology Co., Ltd
Product features
· Innovative technology
· System security
· Numerous units and opening modes
· Colorful colors
· Anti theft, fireproof and bullet proof windows can be selected
· Effective thermal and sound insulation performance
· Advantages of aluminum alloy: durable, firm, slim external view and rich design
