【 Building materials network 】More and more attention has been paid to the decoration of bathroom. On the basis of practicality, beauty should be pursued. Therefore, all aspects should be considered when choosing bathroom facilities. Today, we will talk about what readers care about basin The construction mileage provides some reference opinions.

Construction process of basin installation

expand Bolt Insert → twist firmly → hang the basin pipe rack → Washbasin Put it on the rack and level it → be launched Connection: washbasin → straightening → water filling connection.

Key points of basin installation and construction

(1) Wash basin products should be flat without cracks. The drain plug shall have an overflow hole with a diameter of not less than 8mm.

(2) When the drain plug is connected with the sink, the overflow hole of the drain plug should be aligned with the overflow hole of the sink as far as possible to ensure that the overflow part is unblocked. After inlaying, the upper end face of the drain plug should be lower than the bottom of the sink.

(3) Bracket fixing bolts can be galvanized split bolts or galvanized metal expansion bolts (such as wall yes Perforated brick , expansion bolts are strictly prohibited).

(4) Wash basin and drain Water pipe After connection, it shall be firm and compact, and easy to disassemble. The connection shall not be open. The contact part between the sink and the wall shall be caulked with silicon paste.

(5) Such as sink drain trap and water tap It is a complexing product, and the coating shall not be damaged during installation