【 Building materials network 】Laying during decoration Wood plastic floor Friends will encounter plastic Wood floor The installation problem often makes us feel at a loss. We don't know how to do it floor What should I do when installing? Are there any methods and precautions? Now let's have a detailed understanding with Xiao Bian.
Installation method of plastic wood floor
Front, before plastic wood floor installation
1. From the professional point of view of floor installation, before starting the installation work, the plastic wood floor must be kept dry, flat and clean, so as to better ensure the smooth progress of subsequent installation work.
2. Prepare installation tools Electric drill Common woodworking tools, labor protection gloves, stainless steel screws, etc., of which the electric drill is a necessary tool for installing plastic wood floors. Plastic wood floor is more brittle, and it can be used in fixed floor and keel In order to avoid damage to the plastic wood floor, the electric drill must be used to lead the hole, and then the screws must be installed for fixation.
II. Indoor floor installation process
1. Fixed wood plastic keel: Wooden keel Evenly arranged and tiled cement On the ground, it is recommended that the spacing of each ridge be 30cm. Use the electric drill to lead the hole on the keel. The diameter of the lead hole shall not be less than the diameter of the screw. Then screw the screw into the drilled hole to fix the keel on the cement floor. The screw heads shall be all screwed into the keel, not exposed, or the floor layout may be uneven.
2. Fix the floor near the front: there are yin and yang grooves on the left and right sides of each plastic wood floor. When paving the floor near the front, you can use woodworking tools to cut off or grind off the male groove on the outside of the floor near the front, then use an electric drill to lead holes on the surface of the floor, screw in nails, and fix them on the keel.
3. Fixing the second floor: clamp the male groove of the second plastic wood floor to the position of the female groove near the front floor, then electric drill the pilot hole on the surface of the male groove side of the second floor, screw in the screw to fix it on the keel, and the screw spacing can be controlled by the construction personnel during the installation process. Do not use too dense, and ensure that it is firm. The plastic wood floor installation in the back is the same as that in the front, so there is no need to explain.
Precautions for floor installation
1. Wood plastic can be cut, sawed drill hole , tenoning.
2. Fix the wood plastic keel on the floor with an expansion pipe. The spacing between the fixed points of the expansion pipe is 500mm-600mm. The screw nail cap is lower than the surface of the wood keel. The wood keel needs to be leveled as a whole.
3. Self tapping screws can be used for fastening between wood plastic and wood plastic, and stainless steel self tapping is recommended for outdoor use screw ; Plastic wood and steel plate Use self drilling and tapping screws.
4. When self tapping screws are used for fastening between wood plastic and wood plastic, the holes shall be drilled first, that is, pre drilled holes. The diameter of the pre drilled hole shall be less than 3/4 of the screw diameter.
5. When installing the outdoor floor, a screw should be used between the wood plastic profile and each keel.
6. The junction points of wood plastic floor and keel are connected and fixed with plastic clips.