Water property epoxy Zinc phosphate Primer NL-330 car body paint
contact information
Toll free: 4000263400
Mobile number:***
Telephone:***
Fax:***
Online QQ: 2743631740
Product characteristics:
This product is a water-based epoxy zinc phosphate primer, which is easy to apply, has strong adhesion to the paint film, and has remarkable antirust performance. Non combustible, non explosive, strong safety performance.
Product use:
Applicable to business truck Rust prevention requirements for vehicles, heavy lifting machinery vehicles and electromechanical equipment (such as heavy trucks Forklift Crane, electric tools, electromechanical, etc.).
Product features and supporting products:
• Product characteristics: water-based, two-component, thin texture.
• Recommended supporting system:
It is recommended to use our NL-210, NL-220 or 260 finish paint, and the number of application times is 1~2X35~50 μ m Other topcoats of our company or solvent based coatings can also be used according to specific conditions (please consult our company for specific solvent types).
Construction description:
• Surface treatment: before coating, the coated objects shall be subject to necessary pretreatment such as oil removal, rust removal and dirt removal according to national or industrial standards;
• Air spraying is recommended to obtain a uniform and good coating film. Roller coating and brush coating can also be used for construction;
• Before using the product, please mix it well to prevent local color difference. The construction interval of each layer shall not be less than 2 hours. There is no requirement for larger intervals;
• In the construction process, if it is necessary to reduce the viscosity, add an appropriate amount of clean water for dilution. Do not add too much water. We recommend that the amount of water added should be less than 10%, and the principle of small amount and multiple times should be followed when thinning;
• Construction temperature ≥ 5 ℃, relative humidity ≤ 85%. For special construction environment requirements, such as high humidity environment with temperature below 5 ℃ or above 85%, the manufacturer can be contacted to specially allocate products according to special circumstances.
Technical parameters:
| colour | Optional | Theoretical Coverage | 6 ㎡/kg (dry film 35 μ m) |
| Salt fog resistance | ≥ 300 small Hour | Surface dry (humidity 50%) | 15℃≤1h,25℃≤0.5h,35℃≤0.1h |
| adhesion | ≤1 level | Dry (humidity 50%) | 15℃≤7d,25℃≤5d,35℃≤2d |
| Mixing ratio (packaging) | See packaging | Fully cured | 7d （25℃） |
| Mixed use period | 6h（25℃） | Recoat time | Small 2h is recommended, and large interval is not required |
matters needing attention:
• The remaining paint shall be stored separately, and the PH value shall be maintained at 7.5~8.5 when it is used again;
• At the end of construction, all appliances shall be immediately washed with clean water to prevent drying;
• This product is a water-based environmental protection coating, but we are still responsible for reminding: please try to avoid inhaling paint mist; If the paint is splashed on the surface, it shall be washed immediately with appropriate detergent, soap and water; In case of splashing into eyes, please wash with clean water and seek medical advice.
• The data in this product volume is only for reference, and the specific data of each project construction shall prevail.
Package specification: 20L iron drum
Storage and transportation:
• The effective storage period of the product is 6 months. The product shall be stored in a cool and ventilated place at a temperature of 5~35 ℃.
• Protect from cold, sunlight and rain during transportation.
