Supply home decoration Waterproof coating Investment invitation of manufacturers
Color: green
？ Waterproof for home decoration coating Manufacturer This product is a two-component product, which is modified by Bingene acid polymer cement For the basic waterproof system, chemical reaction takes place after the powder is mixed with additives to form a tough elastic waterproof membrane. The membrane has good adhesion to concrete and mortar, can form a tight and firm long-term combination with it, and prevent water penetration.
Product features:
? 1. It has certain flexibility and can resist slight vibration of buildings and micro cracks caused by various reasons;
? 2. Can be directly constructed on wet base surface
? 3. The adhesive force with the base material is strong, and the active ingredients in the slurry can penetrate into the pores and microcracks in the cement base surface and produce chemical reaction, and form a layer of crystalline and dense waterproof layer with the base material.
4. It can be directly plastered and pasted on the waterproof membrane Stone , ceramic tile, etc.
5. Acid resistance, alkali resistance, high temperature resistance, good aging resistance and good corrosion resistance, harmless, harmless, can be directly used in drinking water engineering; Scope of application:
1. Base course composed of concrete, brick masonry, precast body, light brick, etc;
2. Indoor and outdoor wall , ground or roof, such as tunnels, bridges, basements, kitchens, balconies, toilets, swimming pools, reservoirs, etc;
3. Seal the joints of the pre cast body, the post cast strip, the expansion joints, the periphery of the pipe orifice, and the lightweight, loose and porous masonry;
4. Strengthen the treatment of pipe orifice periphery, corner joint and other parts
Base treatment:
The substrate must be solid and flat, and the surface must be clean and free of dust, oil stain, falling objects and other debris. Obvious pores and sand holes shall be blocked and smoothed with cement mortar, and sharp edges shall be removed. The base surface shall be pre wetted and naturally dried until there is no water.
User Guide:
Pour the slurry into a clean container, and then slowly add the powder while stirring in proportion. Use an electric rod to fully stir for 3-5 minutes until there is no powder or sediment. The uniform slurry can be used after it is still for 5-10 minutes and then stirred again. In order to prevent sedimentation, it is necessary to keep stirring intermittently during operation, and the mixed glue will be used up in about 1-2 hours. Evenly cross brush the adhesive paste on the wet substrate without water accumulation. According to the use requirements, paint more than 2 layers. Wait until it is slightly dry (just not sticky) before brushing the second layer. The brushing direction of the second layer should be perpendicular to the front layer to achieve better coverage effect.
Reference dosage:
The thickness of waterproof membrane is 1.0mm, and the amount is about 1.5-1.7kg/m2 (the actual amount depends on the actual situation of the base surface and the required thickness of waterproof layer.)
quality guarantee period:
***Sealed products shall be stored in a dry and cool environment. Under normal storage and transportation conditions, the product warranty period is one year.
Home decoration waterproof coating better brand investment welcome to call!!!!
Luo Jiaxin: * * * QQ3074815230
