Welcome to the consultation hotline * * * WeChat * * * QQ: 2850275119
New upgrade, stronger compatibility, no price increase for additional quantity. The new upgrade has solved the problem that the resistance value is too small to copy, special chips cannot copy (such as PT2260 HS2260), and the copy remote control can be used again. On the basis of this improvement, some non-standard codes are copied (such as Yum! T19 white lamp , red light, Jieenzi 433 learning code, Jingyuan learning code, etc.)
Product Description of New Quick Copy Remote Control
1、 Overview
Configuring pin During the sales process, many customers hope to have this universal remote control to replace the original one, but such a remote control has not yet come out. As long as you meet the following three conditions for our "copy remote control", you can easily configure your remote control in 2 seconds.
Condition 1. The original remote control can be used normally
Condition II. Know the frequency of the original remote control (refer to the figure below for removing the original remote control)
Condition 3: The original remote controller coding IC is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 and some non-standard remote controllers.
2、 Methods of copying
1. Zero clearing operation before copying: press two buttons on the upper row of the copying remote controller at the same time key (It must be pressed at the same time to be effective). When the LED light comes on, it turns off. Do not release your hand until the LED light flashes, it means that the reset is successful. After the reset is successful, press the remote control button, and the LED light will turn on and off.
2. Copy: Please pay attention to the correct placement of the product before copying. The original remote control and the copy type remote control should be placed side by side on the desktop. Press the down arrow button of the copy type remote control with your right hand without letting go. When you see that the LED light is on, it turns off, indicating that you have entered the copy state. Press the corresponding button on the original remote control quickly with your left hand. When you see that the LED light of the copy remote control flashes, the copy is successful. The method of copying multiple keys is the same.
3. Compact door : If you accidentally reset the code of the copy type remote control, if you want to recover, you can press the two buttons in the lower row at the same time and do not let go. The LED lights up and then goes out. If you do not let go until the LED lights keep flashing, the recovery is successful.
3、 Technical parameters
1. The original remote control IC model that can be copied by this product is 2262 2260 1527 2240 and compatible IC.
2. It is unnecessary to consider the oscillation resistance and address code. This product will automatically be compatible with the oscillation resistance and address code.
3. ICs that cannot be copied by this product, such as HCS300 301 and compatible roll coding ICs.
4. Used by this product Battery It is 12V 23A. Please replace the battery when the remote control distance is insufficient.
5. This remote control has a fixed working frequency, usually 315MHz; 433MHz。 Other frequencies can be customized