Floor type 96 core optical cable junction box:
For purchasing communication network Floor type 96 core optical cable junction box Many people think it is a headache because of the cheap Floor type 96 core optical cable junction box I dare not buy it. It's expensive Floor type 96 core optical cable junction box It's too expensive. It's really a headache to consume hundreds or thousands of communication products. And buy communication network Floor type 96 core optical cable junction box During this period, we also have to guard against the deceit of unscrupulous shopping guides. In short, what we were happy about turned out to be troublesome. Today, the author recommends the professional communication products of Pinyue Communication Equipment Factory Floor type 96 core optical cable junction box , not only can you save a lot of money, but also eliminate your worries.
Floor type 96 core optical cable junction box |SMC96 core optical cable junction box | OCC outdoor communication 96 core optical cable junction box (96 core, 144 core, 288 core, 576 core, 1152 core, 1440 core) Cross Connecting Cabinet for Communication Optical Cable YD/T 988-1998 1 Scope of the People's Republic of China Communication Industry Standard The scope of Cross Connecting Cabinet for Communication Optical Cable YD/T 988-1998 1, the standard of the communication industry of the People's Republic of China, specifies the communication optical cable junction box. The optical cable junction box is used for the interface distribution equipment at the junction of backbone optical cable and distribution optical cable in the optical fiber access network. The main and distribution optical cables can be fixed, peeled, protected, terminated and winded with redundant fibers. Through the optical fiber jumper, the optical fiber serial number in the optical cable can be quickly and conveniently scheduled and the route of the transmission system can be changed. The product has a modular design and relatively optimized optical cable management system to realize the cross connection or interconnection between backbone optical cables and distribution optical cables, as well as the Straight through Connection wiring function. It is also suitable for diversified XPON construction needs and provides a variety of optical splitter value-added unit solutions.
[Ningbo Pinyue Communication Equipment Co., Ltd.] Pinyue connects the world! Information communicates the mind!
Telephone: *** Fax: *** mobile phone: *** - ***
Q Q ： 474665107 – 225357557 WeChat: ***
Floor type 96 core optical cable junction box
an instruction manual
summary
The optical cable junction box is mainly used for the connection, distribution and dispatching of outdoor optical cables. The optical cable is flexibly matched with the optical cable through the optical fiber movable connector and the double head optical fiber jumper. This product series provides safe, reliable, flexible optical fiber and optical equipment line management, which is suitable for various optical communication networks, especially for user optical fiber network access projects.
Installation (divided into cement Base installation and supporting base installation):
1、 Precast cement base:
one The overall dimension of the cement base is 530mm (length) × 290mm (width) × 200 (height), and a 310mm × 170mm × 200mm inlet hole is reserved in the center of the foundation.
two Embedded Footings screw Ensure that the center distance of anchor screws is 440mm × 180mm.
three Place the box on the cement base, align its fixing hole with the embedded anchor screw, and then lock the anchor screw. During installation, keep the box and the cement base vertical and horizontal.
four If it is your base, fix it with 4 M12 × 100 expansion screws.
2、 Installation of supporting base:
When installing the supporting base, fix it with 4 M12 × 100 expansion screws according to the size shown in the figure.
Commissioning:
The installed optical cable junction box shall be debugged. The movable part of the junction box shall rotate flexibly, plug and pull reliably and be easy to maintain. The assembly shall be consistent, firm without looseness, and the grounding point shall be reliable.
characteristic
one The equipment is protected all day long. The shell is made of highly anti-corrosion special synthetic materials, which is characterized by heat insulation, waterproof gas condensation, etc., and can effectively prevent the impact of rain, snow, insects, corrosive gases and any other adverse environment.
two The structure design is reasonable, and the box adopts single side single opening door The wiring space in the box is large, convenient for operation and maintenance.
three The fixation, grounding, welding and coiling of redundant optical cables shall be fully considered to facilitate the connection and scheduling of optical cables.
four The internal optical path shall be clearly marked, and the welding and coiling positions shall be clear.
five . The transfer box is compact in structure, simple in installation and good in sealing performance
six The fused fiber part adopts an integrated fused fiber reel, which makes the coiling of the remaining fiber and tail fiber of the optical cable integrated, convenient for the fused fiber operation, and can be installed with FC and SC adapters. The adapter is at a 30 ° angle to the front of the box, which can ensure the bending radius of the optical fiber, save space, and avoid the beam of light directly hitting the human eye during operation.
seven , suitable for ribbon and non ribbon optical cables.
Main technical indicators
work environment
· Operating temperature: - 40 ℃~40 ℃
· Storage and transportation temperature: - 40 ℃~60 ℃
· Relative humidity: ≤ 95% (at 40 ℃)
· Atmospheric pressure: 70Kpa ～ 106Kpa
Technical performance index
· Nominal operating wavelength 1310nm 1550nm
· Insertion loss of optical fiber movable connector (including repetition and interchange) ＜ 0.5dB;
· Return loss: APC movable connector ≥ 60dB; UPC type flexible connector ≥ 50dB; PC type flexible connector ≥ 40dB
· The insulation resistance between the grounding device and the metal workpiece in the box is>2 × 104M Ω, and the test voltage is DC 500V.
· Temperature resistance: after being placed in the environment of ± 55 ℃ ± 2 ℃ for 16 hours, it will recover for 1 hour under normal conditions, and the performance will not be affected.
· Withstand voltage performance: since the withstand voltage between the boxes is more than 3000V (DC), the grounding device will not break down or flash over for 1min.
· Heat proof performance: the box is made of special materials, with super heat insulation performance.
· Sealing performance: dustproof performance: better than the requirements of GB4208/1P53.
Waterproof performance: 80Kpa water pressure, ± 60 ° water flushing pipe angle, water spraying for 15min, and water droplets cannot enter the box.
· Static load capacity of box: shell cover ≥ 1000N
Side surface ≥ 500N
Door hinge ≥ 300N
· Impact resistance: use the impact test bench to apply six times in X, Y and Z axes respectively
The peak acceleration is 300m/s2, and the impact force lasts for 6ms, without any damage or damage.
Service life of sealing strip: not less than 10 years.
Bending radius of optical fiber: when the optical fiber cable is coiled inside the box, no matter where it turns, its curvature radius is>40mm.
Use and maintenance
one Schematic diagram:
two . The optical cable enters the optical cable junction box from the inlet hole at the bottom of the box. After entering the box, the optical cable is peeled 50mm from the bottom of the box, with a stripping length of 600mm, as shown in the figure:
three The optical cable is fixed to the bottom optical cable lead-in unit.
four The main optical cable enters the integrated fusion wiring unit, where it is fused with the pigtail.
five The integrated fusion unit is of drawer type structure. When welding, pull out the unit. After the operation, push the unit into the chute. When pushing it to the bottom, the unit will automatically lock. After each integrated welding, the distribution unit can card a 12 bit FC or SC adapter, and can weld 12 core optical fibers at the same time.
six Each unit cover plate is pasted with a welding identification record sheet. The welding record must be made after each unit is welded.
seven The connection and dispatching of optical fiber lines are realized by cross connection and double end pigtails on the front of the box. The double end pigtail selects different length series to adapt to the jumper.
be careful
one The optical cable junction box is used for the connection, distribution and dispatching of outdoor optical cables. The box shall be installed on a firm and firm fixed base for easy installation and dispatching.
two The excess length of optical cable in the box shall be naturally bent, and its radius of curvature shall be greater than 40mm.
three After fixing the optical cable, fix the reinforcing core on the reinforcing core column and reliably ground it.
four . Be careful when operating small diameter optical fiber to avoid puncturing the appearance, especially the eyes.
five When optical fiber transmits optical energy, it is recommended not to directly watch the end face of optical fiber and optical fiber connector unless the safety energy output level has been guaranteed
other
Packaging, storage and transportation
The packaging, storage and transportation of this equipment strictly comply with the requirements of the national standard GB3837-83.
packing:
With moisture-proof and vibration proof measures, all accessories shall be packed in boxes or bags and then put into wooden cases, and the whole machine shall be sealed with plastic bags.
Storage:
Heavy articles should not be placed above the box, and the air in the warehouse should be acidic, alkaline or other
Meet the requirements of environmental protection regulations. The indoor temperature is between - 5 ℃ and 45 ℃, and the relative humidity is not more than 85%.
Transportation:
This rack can be used for transportation of various tools. During transportation of packaged products
It is required that the ambient temperature is - 40 ℃ - 55 ℃ and the relative humidity is not more than 90%. During loading, unloading and handling
Some transportation operation marks shall be painted on the package, and the products shall not be placed upside down or sideways.
after-sale service
First of all, sincerely thank you for purchasing our products, and we will provide you with better after-sales service.
one . We are responsible for the transportation, installation and commissioning of the products ordered from our company, and the training of relevant personnel on the use and maintenance to ensure the correct opening.
two . We are responsible for lifelong maintenance service for all products ordered by our company.
three Any feedback from you, we will give a clear reply within 24 hours. Maintenance personnel in the province will arrive at the site 24 hours, and outside the province 48 hours.
1、 Working environment:
one Ambient temperature: - 40 ℃~60 ℃
two Relative humidity: less than 95% at 40 ℃
three Atmospheric pressure: 70 ～ 106Kpa
2、 Product features
one The welding and matching integrated pulling module is adopted to make the connection box have large capacity and high density.
two The box is made of high degree SMC polyester, which has good corrosion resistance and aging resistance, and can withstand severe climate changes and adapt to harsh working environment
three The box has good sealing performance, and the protection level reaches GB/T4208IP65.
four It has good installation performance and vandal proof function.
five The box is equipped with a safe and reliable optical cable fixing and grounding protection device.
six High voltage protective grounding and case insulation resistance: ≥ 2 × 104M Ω/500V (DC)
seven The withstand voltage between the box high voltage protection grounding and the box is ≥ 3000V (DC)/1min, without breakdown and flashover
eight Static load capacity of box: shell cover ≥ 980N, side surface ≥ 980N, door hinge ≥ 200N
nine Sealing protection level of the case: IP65 in GB4208 standard
ten Flame retardant performance: up to GB4609/FV-0
eleven Sealing performance: meet the requirements of GB4208/IP53
twelve Load value: shell cover ≥ 980N, side surface ≥ 400N, support ≥ 200N
thirteen Small pulling force: 24-120N for φ 0.4-1.2mm conductor
3、 Purpose
one The optical cable junction box is the interface equipment used for the connection of outdoor trunk optical cable and distribution optical cable, which can realize the connection of optical fiber. The distribution has the functions of direct connection and cross connection.
Introduction to three networks in one optical cable junction box
1、 Overview
The optical cable junction box is used to realize the connection, distribution and scheduling of backbone optical cables and distribution optical cables in the optical fiber access network, and is widely used in optical fiber access network lines and CATV network line projects.
2、 Main features
one The box is made of all materials of high degree SMC (glass fiber reinforced unsaturated polyester plastic) by high temperature molding, with long service life, aging relief and radiation resistance; The surface does not need any protection and has the function of all-day protection.
two The box is thick and has good heat insulation effect, which can effectively prevent moisture condensation in the box
three The box door is locked with special sealing door seal, waterproof door lock and three-point door pin, which is safe, reliable and well sealed.
four 12 core fusion wiring integrated module is adopted.
five It is suitable for the installation of FC, SC, LC and ST optical fiber adapters.
six There are reliable optical cable fixing and grounding protection devices.
seven It is suitable for the termination of single core and ribbon optical cables.
eight Effectively integrate the three networks of China Mobile, China Unicom and China Telecom. The construction space and intensity are greatly saved.
nine The protection level of the box shall meet the IP65 requirements in the GB/T4208-1993 standard.
ten Beautiful and elegant, clear lines, good anti-corrosion and waterproof performance, and long service life.
eleven Specification of optical cable junction box: 48 core, 72 core, 96 core, 144 core, 288 core, 360 core, 432 core, 576 core, 648 core, 720 core, 864 core, 1152 core.
3、 Functional requirements:
1. Optical cable fixation and protection function
It shall be equipped with optical cable access, fixation and protection devices. The device introduces and fixes the optical cable on the rack to protect the fiber core in the optical cable from damage. The metal part of the optical cable is insulated from the machine. The fixed optical cable metal sheath and reinforcing core should be reliably connected to the high-voltage protective grounding device.
2. Optical cable termination function
It shall be equipped with optical fiber termination device, which is convenient for operation, construction, installation and maintenance of optical cable core and tail fiber connection. It can fix and protect the straight joint without displacement, avoid the influence of external force, and ensure that the coiled cable core and tail fiber are not damaged.
3. Line adjustment function
Connector through fiber jumper connector. It can quickly and conveniently dispatch the fiber core serial number in the optical cable and change the route sequence of the optical transmission system.
4. Protection function of optical cable core and pigtail
After the optical cable is stripped, the fiber core is provided with a protective device and fixed, and then led into the optical fiber termination device.
5. Capacity
The capacity of each rack and unit capacity (determined by the number of adapters) shall be specified in the product enterprise standards. The optical fiber termination device, pigtail reeling device, adapter holder, pigtail and adapter shall be configured in a complete set within the full capacity range.
In the spirit of Pinyue " Be a responsible and pleasant person " And " Be trustworthy, ethical, responsible and scrupulous " The basic code of conduct of " Civic participation " . Influence our employees, our suppliers, our users, and all our stakeholders with their influence in the optical communication industry and their charisma to fulfill corporate social responsibility. We are committed to becoming an enterprise that society expects to exist.
Honest operation, scientific planning and steady development
The sustainable development of enterprises is the premise and foundation of fulfilling social responsibility. Pinyue Company adheres to the concept of honest operation, scientific development and steady operation, abides by laws and disciplines, pays taxes according to law, keeps accumulating and innovating, and continues to provide users with high-quality optical fiber and cable products.
Protect the environment, pay attention to employees, and vigorously create low-carbon enterprises
Pinyue believes that in the long run, even though it is difficult to see the economic benefits of the investment in environmental protection and energy conservation in the short term, the resulting social and environmental benefits cannot be measured with money. Guided by this concept, Pinyue two thousand and four The annual rate was first passed in the same industry ISO14001 ： two thousand and four Environmental management system certification. This not only means that Pinyue has met all the requirements of the standards in environmental management, but also means that Pinyue will continue to save resources and reduce the harm to the environment while providing high-quality products and services to customers. two thousand and seven year nine In April, Pinyue Company launched " cleaner production " It aims to further contribute to building a resource conserving and environment-friendly society through measures such as energy conservation, consumption reduction, emission reduction and efficiency enhancement.
two thousand and five In, Pinyue passed the OHSAS 18001 The certification of occupational health and safety management system constantly improves the comprehensive management level of Changfei Company, and greatly reduces industrial accidents and hidden dangers of occupational diseases. Improve social and economic benefits while enhancing the cohesion of enterprises.
two thousand and eight year nine In June, Pinyue Company SA8000 ： two thousand and eight The standard has established a social responsibility management system two thousand and nine year six In June, it passed the certification of all inspection groups of BVI, and obtained the certificate of trustworthiness of all social responsibility institutions. The certificate once again reflects Pinyue's responsible social image as a larger fiber optic cable manufacturer in China. Since its establishment, Pinyue has attached great importance to brand building. Not only has a complete set of quality assurance system and sales service system been established within the company, but also regular return visits are made to customers to understand the use of products, timely feedback and assistance are given to customers' problems, and high-quality product technical services are provided for users.
[Ningbo Pinyue Communication Product After sales Service Commitment]
In order to create a brand, improve the popularity of the enterprise and establish the corporate image, our company “ Pursue high quality and customer satisfaction ” To “* Preferential price * Considerate service * Reliable product quality ” We solemnly promise you that:
Product quality commitment:
The manufacturing and testing of products are provided with quality records and testing data.
For the product performance test, we sincerely invite users to inspect the whole process and performance of the product in person. After the product is confirmed to be qualified, it can be packed and shipped.
Product price commitment:
In order to ensure the high reliability and advancement of products, the materials of the system are selected from domestic or all high-quality brand products.
Under the same competitive conditions, our company sincerely * Preferential prices are available to you.
Delivery commitment:
Product delivery date: try to meet the user's requirements. If there are special requirements that need to be completed in advance, our company can specially prepare for production and installation to meet the user's needs.
After sales service commitment:
five Service tenet: fast, decisive, accurate, considerate and complete
Service objective: win customer satisfaction with service quality
[Pinyue Communication] Sales area:
East China (including Shandong, Jiangsu, Anhui, Jiangxi, Zhejiang, Fujian and Shanghai)
South China (including Guangdong, Guangxi and Hainan)
Central China (including Hubei, Hunan and Henan)
North China (including Beijing, Tianjin, Hebei, Shanxi and Inner Mongolia)
Northwest China (including Ningxia, Xinjiang, Qinghai, Shaanxi, Gansu and Inner Mongolia)
Southwest China (including Sichuan, Yunnan, Guizhou, Tibet and Chongqing)
Northeast China (including Liaoning, Jilin, Heilongjiang and Inner Mongolia)
Taiwan, Hong Kong and Macao (including Treasure Island, Hong Kong and Macao)
