Explosion proof type Latch BCX53-16 250V 10A , indicating the in-line explosion-proof plug with rated current of 16A and rated voltage of 250V pin The following is a brief introduction of explosion-proof pin BCX53-16:
I Explosion proof bolt BCX53-16 250V 10A Scope of application:
1. Hazardous places with explosive gas mixture: Zone 1 and Zone 2.
2. Explosive gas mixture: IIA, IIB.
3. Temperature group: T1 ~ T6.
4. Explosion proof sign: Exde Ⅱ BT6 Exd Ⅱ BT4 * Exde Ⅱ CT6
II Explosion proof bolt BCX53-16 250V 10A Product features:
one aluminium alloy Housing casting Forming and surface spraying;
two Socket There are opening and closing instructions on it;
3. The socket and plug are equipped with an interlock device, which can be inserted and pulled out only after the power is cut off;
4. The 50~100A socket is equipped with a circuit breaker, with overload and short circuit protection;
5. Steel pipe or cable wiring.
III Explosion proof bolt BCX53-16 250V 10A Product use:
It is applicable to the line with rated voltage below 380V and rated current of 6-16A. It is used to connect the power supply of hand-held tools and lights. It has a cast aluminum alloy shell and plastic sprayed surface. The socket is equipped with opening and closing protective covers. It is forbidden to open the cover with electricity. The grounding contact of the plug is longer than the main contact, so that the ground wire is connected before the main contact is connected. When the plug is pulled out, the ground wire is disconnected later to ensure safety. The plug and switch are made into a interlocking structure. When the plug is inserted, the rotary sleeve on the plug rotates to a certain angle to the right, and the plug in the socket is closed, while the plug cannot be pulled out. On the contrary, rotate the rotary sleeve to the left for a certain angle, the switch will be disconnected, and then the plug can be pulled out. The socket is equipped with a protective cover. After the plug is pulled out, the protective cover will cover the socket to prevent foreign objects from invading. Steel pipe or cable wiring, and cable wiring must be equipped with cable clamping sealing joints.