Acid mist washing Pagoda Processing | Wuhan Qingshan Plastic Factory | Wuhan acid mist scrubber processing is provided by Qingshan Plastic Factory. Acid mist scrubbing tower processing | Wuhan Qingshan Plastic Factory | Wuhan acid mist scrubbing tower processing is a new upgrade launched by Wuhan Huangpi District Qingshan Plastic Factory (www.whqsslc. com) in 2014
Absorption tower is the equipment to realize absorption operation. Design steps ⑴ Determine the design scheme according to the design tasks and process requirements; ⑵ Select appropriate material system and separation requirements filler ；⑶ Determine tower diameter, height of packing layer and other process dimensions (considering spray density); ⑷ Calculate tower height and pressure drop of packing layer; Plate tower is equipped with layers of trays in the tower, and liquid enters from the tower top. The gas enters from the bottom of the tower, and the gas-liquid mass and heat transfer process is carried out on each tray. There are many types of plate towers. It can be roughly divided into two categories: one is downcomer type, such as bubble cap tower, sieve plate tower, float valve tower, S-shaped one-way flow plate tower, tongue plate tower, floating jet tower, etc; The other is perforated plate tower, such as perforated grid perforated plate tower (downpour plate tower), corrugated perforated plate tower, rhombic inclined orifice plate tower, short pipe perforated plate tower, etc.
Acid mist absorption tower, also called acid gas purification tower, acid mist purification tower, acid mist purification tower, waste gas purification tower and Glass The steel acid mist purification tower plays the role of removing harmful gases from waste gas. It has the characteristics of wide application range, high purification efficiency, low equipment resistance and small floor area. The purification tower has two kinds of multi-functional acid mist waste gas purification tower products, "vertical" and "horizontal", which are mainly used for the waste gas purification equipment made of glass fiber reinforced plastics. It has reasonable product design, and uses newer high-tech fillers, with less resistance loss, large specific surface area, perfect chemical reaction, reasonable gas-liquid ratio, high absorption and purification efficiency, corrosion resistance, and good aging resistance, It is easy to install and maintain. The products are widely used in the purification of noxious and harmful gases such as NOX, SO2, H2SO4, HCl, HF, SIF4, CO2 produced in the mechanical processing industries such as chemical industry, electroplating, hardware, electrical appliances, medicine, printing and dyeing, telecommunications, clocks and watches; It is also applicable to ammonia, hydrogen sulfide, phosgene, formaldehyde methanol Deodorization treatment of amine and other odorous substances; The filtering area depends on the treatment amount, and the neutralization and elimination effect is 95%; Discharge outlet<10PPM. Fan, water pump It can flexibly design the layout according to the user's site, facilitate maintenance, compact structure, and occupy less land.
