Wuhan Huangpi Qingshan Plastic Factory is mainly engaged in: PP board, pp Chemical pipes and accessories, polychloroene pvc board, pvc transparent board, pvc soft board, Unburned brick Pallet, ABS Plate and water tank and trough made of various materials pot , Absorption Pagoda , air duct, etc. Absorption tower is the equipment to realize absorption operation. The gas-liquid two-phase flow in the tower can be countercurrent or concurrent flow. Generally, counter current operation is adopted. Absorbent flows from top to bottom by adding it to the tower top, and contacts with the gas flowing from bottom to top. The liquid absorbed the absorbent is discharged from the tower bottom, and the purified gas is discharged from the tower top. Absorption design Absorption tower is used for absorption operation. The process of making soluble components dissolve in the absorbent and separating from other components by using the different solubility of gas mixture in liquid absorbent is called absorption. During operation, the liquid absorbent sprayed from the top of the tower is in close contact with the gas mixture rising from the bottom of the tower on each layer of packing or tray in the tower for absorption. Absorption accompanied by chemical reaction is called chemical absorption. According to the gas-liquid interaction mode during absorption, absorption towers can be divided into surface type, membrane type, spray type and bubble type.
Absorption tower is the equipment to realize absorption operation. During operation, the liquid absorbent sprayed from the top of the tower is in close contact with the gas mixture rising from the bottom of the tower on each layer of packing or tray in the tower for absorption. Absorption accompanied by chemical reaction is called chemical absorption. According to the gas-liquid interaction mode during absorption, absorption towers can be divided into surface type, membrane type, spray type and bubble type. Plate tower is equipped with layers of trays in the tower, and liquid enters from the tower top. The gas enters from the bottom of the tower, and the gas-liquid mass and heat transfer process is carried out on each tray. There are many types of plate towers. It can be roughly divided into two categories: one is downcomer type, such as bubble cap tower, sieve plate tower, float valve tower, S-shaped one-way flow plate tower, tongue plate tower, floating jet tower, etc; The other is perforated plate tower, such as perforated grid perforated plate tower (downpour plate tower), corrugated perforated plate tower, rhombic inclined orifice plate tower, short pipe perforated plate tower, etc.
Wuhan Acid Mist Washing Tower Processing, Tianmen Acid Mist Washing Tower Processing, and Wuhan Qingshan Plastic Factory are provided by Qingshan Plastic Factory. We are Wuhan Huangpi District Qingshan Plastic Factory (www.whqsslc. com), located in Wuhan, Hubei Province, specializing in: PP board, PVC board, PP chemical pipe and various materials of plastic processing