What are the methods of water pool expansion joint, settlement joint, deformation joint, seepage, leak repair, leak stoppage and grouting?
Leakage stoppage of sewage pool, expansion joint of sewage pool, leakage stoppage of water pool, settlement joint of sewage pool, broken crack of sewage pool, deformation joint of sewage pool, construction joint of sewage pool, leakage stoppage under pressure, leakage stoppage with water
Leakage stoppage of sewage pool
In case of serious water leakage at the bottom plate and wall of the sewage pool, our technicians have investigated the site and developed a set of practical construction scheme based on years of practical experience.
2、 Cause of water seepage
The leakage of the sewage pool is mainly caused by the leakage of the wall and the sewage pool, or by the settlement of the bottom plate of the sewage pool or cracks caused by large bearing pressure.
3： Main application materials for construction: water-soluble polymer combination nano grouting materials are selected.
1. Introduction to grouting materials
The product is a light to amber transparent liquid. It is a two-component high pressure plugging material composed of high molecular nano polymer and a variety of additives. It is a kind of high composition plugging material that can both plug and consolidate quickly. It can be used for water plugging, seepage prevention and reinforcement in various projects.
2. Material characteristics
This material is made of two kinds of materials. According to different proportions, the setting time of slurry is different and it is elastic. This method eliminates the traditional polyurethane grouting process and has a long warranty period.
(1) This material has good hydrophilicity, and it penetrates and diffuses upstream along the incoming water channel, consolidates with surrounding concrete, sand, soil, etc., and rapidly hardens to form an impermeable consolidation layer, which has been widely used to block water inrush under high pressure and prevent water flowing and water seepage in the foundation.
(2) This material has a large cohesive force with concrete and soil particles, and can produce highly elastic consolidation body, so it can fully adapt to the deformation of foundation or other base courses, making it difficult to find the initial strength of reinforcement due to cracks and collapses.
(3) In the structure with water, the slurry will not be washed away. In the reaction process, the effective consolidation area is rapidly enlarged due to the diffusion of gas, and a much larger consolidation body can be obtained than other types of slurry.
(4) According to the different needs of the project, the viscosity of the grouting fluid can be adjusted. For concrete projects, such as basement, circulating water pool and other small cracks, the grout can quickly penetrate after grouting, forming a firm bond and strong impermeability.
(5) The curing speed of slurry can be adjusted according to the construction needs.
(6) Single grouting equipment is used during construction, which is easy to clean, simple and feasible, and low in comprehensive cost.
(7) Immersion of the consolidated body in water is harmless, harmless and pure to human body.
(8) The corrosion of the water stop steel plate is blocked by high-pressure grouting, and all of it penetrates into the concrete cracks, so no further treatment is required.
3. Material technical guidance
Project technical indicators
Appearance: light yellow~amber transparent liquid, harmless and tasteless
Viscosity, 20 ℃, Mpa. s 100~400
Gel time: tens of seconds~tens of minutes
Bonding strength Mpa ≥ 1.0
Water volume 20 times
4、 Construction organization
1. The project manager responsibility system is implemented in this project.
2. Construction management system.
5、 Construction process and key points
1. Construction process of leakage plugging at the sewage pool location: determine the leakage location of the sewage pool foundation pit, clean the leakage base surface, chisel a "V" groove, quickly plug the leakage agent, embed the grouting pipe, pull the rod to form a cavity, install the grouting connector, inject high molecular nano slurry under high pressure, observe the leakage repair, remove the grouting nozzle, repair the slot hole, and check and accept with adhesive coating
2. Key points of construction
(1) Clean the leaking part of sewage pool and chisel "V" groove
(2) The grouting pipe shall be embedded with quick plugging agent, and the spacing shall be determined according to the actual situation, generally about 1m.
(3) Use the high-pressure grouting pump to inject the water-soluble macromolecule nano leak stopping agent into the expansion joint and concrete void joint from the grouting pipe until it cannot be pressed (injection rate ≤ 0.011/min), then close the valve, and cut (remove) the grouting nozzle after the grout has solidified.
(4) Clean equipment and tools with solvent after grouting.
3. High pressure grouting method
Introduction to high-pressure grouting leak stoppage method: high-pressure grouting leak stoppage method is to use mechanical high-pressure power (high-pressure grouting machine) to inject water-soluble polymer nano grouting materials into concrete cracks. When grout encounters water in concrete cracks, it will quickly disperse, emulsify, expand, and consolidate, so that the consolidated elastomer fills all cracks in concrete, The water flow is completely blocked outside the concrete structure to achieve the purpose of water stop and leak stoppage.
Grouting is applicable to underground garage settlement joints, caverns, pump houses, pools, dam tunnels, rock foundations, cable trenches and other projects for water plugging, leakage repair and seepage prevention. It is made of a variety of high molecular materials B Two fluids are injected into the leakage part with specific high pressure apparatus in equal amount to make it fill the leakage cracks, and no leakage will occur in more than 10 years. Our company also provides special polymer material construction technology consulting services.
High pressure grouting plugging technology is a new waterproof technology of high-pressure airless grouting with international advanced level, which is a new technology used in water-soluble grouting materials in developed countries.
(1) This construction method is to use the huge pressure generated by the high-pressure grouting machine to send the materials to the middle part of the gap of the wall body, so that the middle part of the materials is the center and diffuses around. After the materials and water react and harden quickly, the gaps are filled to achieve the effect of strengthening the foundation, plugging and seepage prevention.
