1、 Product appearance
two 、 Product Introduction
This product is of high quality ABS engineering plastic And high quality spare parts Made with super fine craftsmanship Abrasive tool casting It is equipped with an automatic cable arrangement structure and an automatic locking device, which can realize free stretching, automatic cable retraction, automatic cable length positioning, and control the length of cable pulling out and recycling. The free expansion design realizes the purpose of taking up less space. It is convenient and fast to use, making the site more tidy and orderly. High quality rubber sheathed cables are used to extend the service life of the equipment. The product can be flexibly fixed on the wall or ceiling, and is not limited by the working space. The stretching length can be freely adjusted within the specified range. The fixed rear disc body can swing 180 degrees from left to right, with a wide working range. It is suitable for: automobile repair and maintenance/automobile beauty, production line, electronic factory, power plant, special vehicle manufacturing equipment workshop, electromechanical maintenance, 4S brand stores of automobiles and other places.
III Overall dimensions and Mounting bracket
IV Working principle and composition
1. Operating principle
The high elastic coiling spring provides the coiling force and can take up the wire independently. The rewinding pipeline can be arranged layer by layer in an orderly manner by using the built-in same layer cable arranger. The length of the rewinding stretching cable can also be controlled at any time by the built-in "self-locking device" to save space. "Self locking device" can be removed. After removal, it can be stretched freely and pulled out to release It can be automatically recycled to meet different needs.
2. Color and composition
Red Blue Grey Color
3. Product Features
one . Steel spindle, durable, firm and not easy to break
2. Automatic pipe laying device on the same layer to avoid mutual winding of pipelines
3. Double side bearing steel bearing, which can be pulled and pulled smoothly and reduce resistance
4. Automatic locking device, free control during pulling and retracting Length of wire pipe used
5. The steel pawl seat is not easy to deform, and the detachable seat is more convenient to take and place
6. The disc body can swing 180 ° from left to right, with wide working range and unrestricted use
7. Assembly slip ring supports 2.5mm2
5、 Slip ring assembly:
1. The assembly accessories are reliably insulated and work safely under 750V voltage
2. Combined multi line type, which can support five groups to work at the same time
3. Thickened micro elastic conductive copper ring, without defect, supports 2.5mm2 wire diameter
4. The side installation mode ensures the stability and reliability of the slip ring assembly
6、 Precautions
1. This product is only used indoors. If it is used outdoors, please make a rain proof sunscreen;
2. Please pay attention to the applicable voltage range of the product before use;
3. If it is not used for a long time, please disconnect the power supply;
4. Do not hit the reel during use to ensure safe use;
5. Regularly check whether the stretching recovery of products is smooth;
6. When stretching and recovering the pipeline, the hand should be taken lightly, and it is strictly prohibited to yank or release the hand to let it take up the wire by itself;
7. Do not leave the product outdoors at low temperature to prevent the cable from hardening and affecting automatic retraction.
8. Most of the products are plastic products. During work, try to avoid overloading and heavy pressure to avoid damaging parts
nine The housing is ABS Material, please do not wipe with thinner.
7、 Safe use
1. Children and people without operating skills are forbidden to use this product.
2. It is forbidden to remove any parts on the product.
3. After installation, check whether the voltage of the plug/socket is consistent with the power system, and whether the plug/socket at the working place to be determined is suitable. If necessary, replace it. Avoid overloading the product, which may endanger the operator and shorten the service life of the product.
4. When pulling out the power plug, hold the plug instead of pulling the cable itself. Do not touch the cable with wet hands to prevent electric shock.
5. Please check the cable before using the product each time to ensure that it is not damaged or aged.
6. The product should be used in a dry and cool place, not in a damp place, a place directly exposed to the sun or a place with heat dissipation appliances, to avoid contact with chemical substances that are harmful to the product, which may damage the cable insulation protection layer and cause electric leakage.
eight . Locking and retraction
1. When When the cable extends to the required length, pull out the cable slowly until a "tick" sound is heard, and it will be locked automatically.
2. If you need a longer cable, you can hold the cable and pull it out until you hear the "tick" sound.
3. When it is necessary to retract, pull the cable out for about 30-40cm until no "tick" sound is heard.
4. During automatic retraction, the force in the direction of retraction shall not be applied to the cable to prevent the cable wound on the winding barrel from loosening, which will cause irregular winding. If necessary, pull out the cable and allow it to retract, so as to ease the twist of the cable and make the cable stack evenly. It is forbidden to pull out all the cables to avoid that the cables cannot be retracted.
5. During automatic retraction, the cable shall be gently held by hand, so as to avoid unnecessary injury caused by rapid retraction.
six Usage of self-locking
a） The wire winder is equipped with a self-locking device inside. When in use, the wire is pulled out to a suitable position, and the wire is locked. When not in use, the wire needs to be pulled down by hand. The pawl crosses the thorn groove, and the wire is automatically recovered once it is released.
b） When the wires need to follow the equipment to move back and forth, they are pulled out by the equipment. When the wires are pulled out, they need to be locked back when the equipment is retreated. In this case, self locking is not required.
9、 Maintenance
Before regular maintenance, check whether the cable is disconnected from the power supply to ensure personal safety. Do not touch the plug and socket with water to avoid electric shock. Regularly check the working performance of the cable. If the cable or enclosure is very dirty, it can be wiped with gauze dipped in a little diluted neutral solution or solvent. Put the product in a dry and covered place for use, so as to facilitate the safety of use and extend the service life 。
X Winding specification
Conventional wire 2 * 1, 3 * 1, 4 * 1, 5 * 1, 2 * 1.5, 2 * 2.5, 3 * 1.5, 3 * 2.5, 4 * 1.5 can be wound about 30 meters
4 * 2.5, 5 * 1.5, 3 * 4 can be wound about 25 meters
4 * 4,5 * 2.5 can be wound about 20m
