● Product characteristics Product characteristics
1. It has unique waterproof, high elasticity and integrity, and the film is continuous without any joints;
2. High temperature resistance, low temperature resistance, good aging resistance;
3. Right cement mortar , concrete matrix, wood ceramics , glass and other building materials have good cohesiveness and permeability;
4. Good elongation and good ability to prevent direct light;
5. Harmless, tasteless, pure, green and environmentally friendly;
6. The color is pleasing to the eyes and beautifies the environment;
7. Single component, water soluble, roll coating and spraying;
8. It is safe, reliable, simple to operate, convenient to construct, and shortens the construction period.
● Scope of application Application filed
1. Used for new and old roof, roof, glazed tile roof (three curved tile roof), metal roof, planting roof and other waterproof works;
2. Used for waterproof and moisture-proof works such as grain depots, warehouses and workshops
3. Used for bridge, tunnel, civil air defense and other waterproof works;
4. It is used for waterproofing works such as swimming pool, fish pool, reservoir and sewage treatment pool;
5. For facade exterior wall and new wall, anti-seepage and moisture-proof works;
6. It is used for waterproofing of special complex projects.
● performance index Performance index
Appearance: pink, green, sky blue, sea blue and other colors
PH value 6-8
Solid content above 65%
Surface drying time < 45min
Permeability: ≥ 0.3mm
Crack resistance ≥ 4.3-6mm
Elongation ≥ 600%
Low temperature flexibility - 20 ℃
Tensile strength ≥ 1.6Mpa
Alkali resistant saturated Ca (OH) 2 and 0.1% NaOH mixed solution, soaked at 15 ℃ at room temperature for 15 days, without swelling and falling off.
Heat resistance 100 ± 1 ℃, no flowing, no swelling, no falling off for 6 hours
● Construction technology
1. The waterproof coating shall be mixed evenly before construction, and water shall not be added randomly during use.
2. The product is applied by brushing or roller coating. The direction and stroke of brushing shall be consistent. The brushing shall be conducted alternately and evenly. Waterproof coating film shall be applied in layers and times.
3. Each coat shall be painted after the previous one is dry (it is better to touch the coating with hands without sticking).
4. Lay the carcass cloth, and the overlap shall not be less than 5cm. When laying the matrix reinforcement material in the coating, it is advisable to lay the matrix cloth while applying it. The matrix should be scraped flat to discharge bubbles, so that the coating can penetrate the matrix and cover it completely, without any exposed matrix.
● Notes
1. The construction temperature should be above 5 ℃ and below 35 ℃.
2. No water shall be added to the coating during use.
3. It must be stirred evenly before painting, and it is not suitable to water 3 hours after painting.
Telephone:***