Liuyang Integrated Fire Water Tank Installation Technology
Buried box pump The advantages of integrated equipment are as follows:
Saving indoor space: centrifugal pump and pump room are placed in Water storage tank It is fixed on the special control module of the integrated pump station. commonly Only occupy under the condition 0.5~.5m The storage tank capacity of.
It is easy to move and disassemble, and has a long service life: because the prefabricated building insulation water tank is selected, the past welding process is changed screw The assembly line has strong versatility and convenient installation without professional equipment.
Convenient drainage: because a new type of deep submersible fire pump is selected, it can be immediately submerged into the water without professional gas drainage. If the level gauge of the water storage tank is within the required level gauge, it can directly enter the fire safety power supply situation.
Freezing free: the fire pump is submerged into the water storage tank zui Deep down, it is not easy to be burned because of icing in winter.
Low noise: configured immersion type Motor And centrifugal pump, greatly reducing the noise of operation.
Credibility: Immersed motor is not easy to burn motor and erode motor bearing due to rain or operating temperature.
Simple upgrade: the socket can be used for remote control transmission, full-automatic cleaning, sterilization, disinfection and sterilization.
Comparison of several power supply methods:
With the rapid development trend of intelligent big cities, the rapid development of multi-storey buildings, the upper cooling Pagoda The power supply regulations for multi-storey buildings can no longer be considered. Under such standards, the automatic technology tower less water supply equipment has a rapid development trend. The key is DC frequency conversion constant pressure water supply equipment, pipe network extrusion non negative pressure water supply equipment and tank pump integrated sewage treatment plant.
The DC frequency conversion frequency conversion constant pressure water supply machine equipment is an immediate suction pump in the water storage tank, which is to add drinking water resources to the water storage tank for storage, and then use the pump set to pressurize according to the DC frequency conversion automatic control system to the total flow and working pressure required to meet customer needs. The DC frequency conversion automatic control system gives feedback according to the data signal of the liquid level sensor on the network of the customer pipe, analyzes and solves the problem, and then outputs a moderate frequency.
Field of application: areas where local power supply units allow tandem pressure water supply equipment , Booster pump room for drinking water and office tap water in various multi-storey buildings , Renewal and transformation of the existing traditional water reservoir and water storage tank by adding power supply method , Booster pump room for production and drinking water of various factories and mining enterprises
The first two are mostly simple components of centrifugal pumps, pipelines, gate valves and control boxes.
It combines the advantages of DC frequency conversion constant pressure water supply equipment and pipeline network extrusion non negative pressure water supply equipment. It is based on the feedback of the working pressure of the water pipeline network, and intelligently converts the leakage water resources of the machine equipment. When the working pressure of the drinking water service project is very high or the tap water is low, It will automatically open the electric control valve of water inflow resources of machinery and equipment, and close the electric control valve of power supply for water storage tank; When the tap water is at its peak, it will automatically turn off the electric regulating valve for drinking water leakage and open the electric regulating valve for water storage tank power supply. At this time, it has become a traditional DC frequency conversion constant pressure water supply machine. Never reduce the working pressure of the service items of the water pipeline network.
Liuyang Integrated Fire Water Tank Installation Technology
Manufacturer of buried box pump integrated constant current source water supply and drainage equipment
The buried tank pump integrated equipment manufactured by our company is in accordance with the fire equipment specification of China GB27898.2-20 Automatic Constant Pressure Water Supply Equipment for Fire Protection and national standards 02S0 New fixed fixed fire fighting equipment for fire safety in standard atlas design scheme.
Repeatedly ensure that the machine and equipment meet the requirements GB50974-204 Building fire protection code: the fire pump motor of this commodity is installed with dry test motor and long shaft pump, conforming to 204.0. Technical standards for fire pump motors in the Technical Code for Fire Water Supply and Hydrant Systems that has just been implemented ; Ensure the acceptance of fire engineering.
Manufacturer of buried box pump integrated constant current source water supply and drainage equipment , Show the quality inspection report package for fire engineering acceptance
After sales maintenance service: our company has additional after-sales maintenance service obligations for all our products , For project engineering, our company will send full-time personnel to the site to help install and adjust, and learn and train the customer's actual operation staff on the site.
If the customer must authorize our company to install machinery and equipment, our company will send professional technicians to undertake the installation (a certain amount of equipment installation engineering cost should be deducted as appropriate).
After installation, investigation and test, all kinds of data monitoring and condition processing are completed, and bound into a booklet for archiving and storage.
Within the quality retention period of the goods, our company undertakes service projects (due to product quality problems of the goods), except for spare parts. In case of any product quality problem after the warranty period, our company will provide a thorough technical consultation and the buyer will purchase spare parts.
The enterprise will provide lifelong service support for each customer, carry out on-site inspection or return visit on time for the goods in application, and timely handle and solve problems.
If you have any questions about the customer's phone calls, please call the local service point if you need any service items. If you have a service point locally, you will arrive on the spot within 12 hours, and if you have a service point in another place, you will arrive on the spot within 48 hours, never delaying the customer's production.
The full-time staff of the customer shall be responsible for the rules and regulations. Each time, the customer service sheet shall be filled in and signed by the customer.
The service project staff are friendly to customers, and they must respond carefully to and express their questions about standard service projects.
All the goods sold by the enterprise must have the quality card, certificate of conformity and inspection report group reviewed and signed by the quality inspection department. All raw materials must be stamped with the company's official seal, quality inspection seal and special seal for materials. The printing will be invalid again, and the goods within the warranty period of the enterprise will not be used.
Ordering precautions:
Consumers can Select models and specifications of machinery and equipment according to the sample produced by our company, and supply complete sets of equipment for this commodity
If it is necessary for our company to select the model and specification of machinery and equipment, please show the detailed main parameters of the project, and fill in the data information in the following performance parameters of the consumer project and send it to our company
The enterprise gives priority to the pump factory, and consumers can also choose other types and specifications of centrifugal pumps
If consumers have special requirements, please fill them in the performance parameters of consumer engineering projects, and the enterprise will carry out the design scheme and delivery according to the provisions of consumers
Basic scope of delivery of machinery and equipment: from the flange with anchor bolts on the inlet pipe of the constant flow pipeline compensator to the flange with anchor bolts on both sides of the main outlet pipe of the centrifugal pump, the gate valve, liquid level sensor on the outlet channel, the control box and power lines related to the operation of machinery and equipment
The gate valve, filter device, ultraviolet sterilizer, chlorinator, active oxygen socket and backflow preventer of the water pipe in front of the inlet pipe number of the constant flow pipe compensator are optional. Please indicate when ordering
The enterprise can Show consumers dashboard and other supporting facilities
