American TSI9500 AEROTRAK portable laser particle counter has high functions and characteristics. The American TSI9500 AEROTRAK portable laser particle counter fully complies with the ISO 14644-1 standard. According to the EU GMP standard, the sampling volume of 1 cubic meter can be completed in 10 minutes. The U.S. TSI9500 AEROTRAK portable laser particle counter is compatible with TSI's accurate ventilation probes, which can measure air flow rate/temperature/humidity, providing a complete solution for certification. Equipped with an electronic filter scanner with a pipe length of 8 meters, it becomes a better choice for on-site filtration test.
The US TSI9500 AEROTRAK portable laser particle counter can generate the success and non conformance reports of ISO 14644-1, EU GMP Annex1 and FS209E. The U.S. TSI9500 AEROTRAK portable laser particle counter can not only be used as a portable particle counter alone, but also can use the F MS 5 software, connected to the whole set of online monitoring system. The American TSI9500 AEROTRAK portable laser particle counter strictly complies with the ISO 21501-4 protocol. It is verified by the standard particle measurement method, that is, PSL pellets from the National Institute of Standards and Technology of the United States pass through the screening device and condensation particle counter of American TSI. Based on its two-year warranty and the long-term good reputation of TSI's high-quality products, there is no particle counter of the same type in the market at present.
Features and advantages of American TSI9500 AEROTRAK portable laser particle counter:
1. The particle size ranges from 0.5 to 25 μ m
2. More data can be measured for six channels at the same time
3. The flow rate is 100L/min
4. It fully complies with the requirements of ISO 21501-4, and is a better choice for filtering test in clean rooms, with 10000 data storage capacity and 999 locations
5. Ethernet, USB output
6. Industrial acousto-optic start emergency signal
7. Simple icon touch screen operation, providing report in accordance with ISO 14644-1, EU GMP Annex1 and FS209E, allowing storage and playback of three environmental parameters in specific tests
8. Stainless steel accessories, light in weight, can be used alone or compatible with the whole online monitoring system
9. It can be verified that the clean room conforms to ISO Class II standard
Technical parameters of TSI9500 AEROTRAK portable laser particle counter:
TSI9500 AEROTRAK portable laser particle counter particle size range: 0.5-25 μ m
TSI9500 AEROTRAK portable laser particle counter particle size channel: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μ m (additional channel optional)
TSI9500 AEROTRAK portable laser particle counter particle size resolution: 0.5 μ m<15% (in accordance with ISO 21501-4)
TSI9500 AEROTRAK portable laser particle counter counting efficiency: 50% when 0.5 μ m, high standard when particle size is greater than 0.75 μ m (in accordance with ISO 21501-4 and JIS)
TSI9500 AEROTRAK portable laser particle counter concentration limit: higher loss of 5% when greater than 100000/ft3
TSI9500 AEROTRAK portable laser particle counter Laser source: long-life laser diode
Zero setting of TSI9500 AEROTRAK portable laser particle counter: 5 minutes<1 (in accordance with ISO 21501-4 and JIS B9921)
TSI9500 AEROTRAK portable laser particle counter flow: 100 L/min ± 5% (in accordance with ISO 21501-4 and JIS B9921)