SBS (elastomer) modified asphalt waterproof membrane

Product description
Elastomer（ SBS ）Modification asphalt Waterproof roll with ethylene - Butadiene - benzene Ethylene (SBS) thermoplastic elastomer modified asphalt is used as impregnation and coating materials, polyester felt, glass fiber felt and glass fiber reinforced polyester felt are used as the base, and the upper surface is covered with polyethylene film, fine sand or mineral flakes and other isolation materials.
Product specification: width 1.0m, length 10m/roll or 7.5m/roll; Nominal width 1.0m;
Thickness specification: 30.mm, 4.0mm, 5.0mm;
Covering materials: PE film, AL (aluminum) film, S (sand), M (shale).
Note: The sand surface is divided into ordinary sand and colored sand Sand, color Sand is grass green and wine red.

Product benefits
Good low-temperature flexibility, good tensile resistance and high extensibility;
Adopt stable and reliable brand raw materials and advanced modern production technology and equipment;
Sound quality assurance system and perfect service system.

Scope of application
All kinds of industry and civil: roof engineering, underground engineering waterproofing, municipal engineering waterproofing; Especially suitable for high latitude and cold regions.

Key points of construction
Hot melt method shall be adopted for construction. When hot melt method is used to pave coiled materials, attention shall be paid to uniform, sufficient and moderate heating; The internal and external corners shall be made into arc corners or 45 ° chamfers; The width or length of the additional layer should be 500 mm, 250 mm on both sides; The lap joint shall be hot-melt sealed until the strip asphalt overflows from the lap joint.