Luxury exterior wall paint
Cartridge
High quality Exterior wall emulsion paint , advanced Silicone acrylic emulsion and auxiliary With reasonable and scientific compatibility, it can be effectively protected wall And provide ideal decoration effect, which is the ideal exterior wall coating material.
Product model
OM2700, QR5-12, PT7004, LS2700
Product use
It is applicable to the masonry cement Decoration and protection of mortar, concrete and other base surfaces.
Product features
one Excellent stain resistance and good weather resistance
two Super water resistance, alkali resistance and adhesion
three Keep the decoration effect good
four Good mold and algae resistance
five . It has excellent anti direct light performance and good weather resistance
six Service life 5-8 year
Product supporting
Primer :OM2001, QR5-14,PT5007 High performance transparent exterior wall alkali resistant primer one Or OM2002, QR5-15, PT5008 High performance white exterior wall alkali resistant primer one Times
Topcoat :OM2700, QR5-12,PT7004 Luxury exterior wall paint two Times
colour
Please refer to "European and American Architectural Coatings" color card and folding color card
technical parameter
one Theoretical coating amount :12-14 ㎡ /kg/ Times
two Surface dry time : ≤ one hour ( 25 ℃, relative humidity ≤ 75%)
three Recoating time : ≥ two hour ( 25 ℃, relative humidity ≤ 75%)
four Solid content :51 Soil 1%
construction
one Surface treatment : The surface to be painted shall be flat and clean, pure, free from cracks, looseness, hollowing, etc
Enough curing period to make it fully dry PH Value should be less than ten , moisture content should be lower than 10} And apply one coat of exterior wall primer ;
two The wall surface to be painted must be solid and firm, without sanding, cracks, looseness, hollowing, etc ;
three Available before use 10-20% With clean water and stirred evenly ;
four . It can be brushed with fine wool, and painted with roller or airless spray, usually the first coat three hour ( Apparent ambient temperature
And drying conditions ) Before painting two Apply finishing coat.
matters needing attention
one Before use, it must be fully mixed, and the ratio that is easy to construct shall be selected according to the site temperature and temperature to adapt to different painting methods
Required viscosity shall prevail :
two This product is water-based paint, and solvent pollution in agricultural production system should be avoided ;
three Pay attention to safety during construction and do necessary labor protection work well ;
four . The construction site shall be ventilated. Construction cannot be carried out in rainy or windy days. The wet wall shall be dried before construction :
five , Estimated twenty-four No construction is allowed if it rains within hours twenty-four In case of rain within hours, it shall be covered to prevent the coating from being damaged by rain ;
six Construction temperature : Temperature below five ℃ Humidity higher than 90% It is not suitable for construction.
Packaging specification
twenty Kg can packaging
Storage method : Store in a cool and dry place to avoid sun, rain and high temperature. The shelf life is 18 months.