ZTMX series turn Pagoda Type busbar processing machine I Introduction: This series of bus bar processing machine has three units: punching, shearing and folding. Its main function is to process copper and aluminum bus bars of different specifications. With the corresponding processing units, you can easily and quickly cut and punch copper and aluminum bars (round holes and oblong holes), bend flat, bend vertically, emboss, flatten, and so on. II Main features: 1. The cutting unit adopts the universal single blade cutting, with flat cutting mouth, saving labor and materials. 2. The punching unit adopts a six die position integral rotary table, which ensures the alignment of the upper die and the lower die, and improves the concentricity of the die. 3. The bending unit adopts closed bending, which makes it more uniform when processing flat bending and embossing, and extends its service life. 4. The bending unit adopts vertical processing, which is safer and more convenient during processing. 5. The three working stations of the machine can work at the same time, greatly improving the working efficiency. six Hydraulic oil The box is thick steel plate Welding, and phosphating treatment, so that long-term use of hydraulic oil will not deteriorate. 7. The punching, shearing and folding three processing units all adopt the double foot control system. Even if they are separated from the upper and lower limits of each station under the automatic control mode, they will never affect the production and use of users, thus reducing the failure rate of the equipment and eliminating the suffocation of previous equipment pump Potential safety hazards such as tubing rupture. In the case of manual control mode, the advance and retreat operation of each station is simple and convenient, thus improving the production efficiency. 8. This model machine is divided into two types: ordinary type and numerical control type. The numerical control system is Panasonic. III Selection of main accessories: 3. Electromagnetic hydraulic valve Beijing Mingde 4. AC contactor Schneider Electric 5. Numerical control system Panasonic 6, color touch screen Morita IV [ZTMX-30] bus bar processing machine parameter comparison table; parameter | ZTMX-30DB | ZTMX-30SB | ZTMX-50DB | ZTMX-50SB | Larger punching force (KN) | three hundred | three hundred | five hundred | five hundred | Large processing range | φ4.3-φ25 | φ4.3-φ25 | φ4.3-φ32 | φ4.3-φ32 | Larger punching thickness (mm) | twelve | twelve | eighteen | eighteen | Larger shear thickness (mm) | twelve | twelve | eighteen | eighteen | Larger shear width (mm) | one hundred and fifty | one hundred and fifty | two hundred and fifty | two hundred and fifty | Large bending force (KN) | three hundred | three hundred | five hundred | five hundred | Larger bending width (mm) | one hundred and fifty | one hundred and fifty | two hundred and fifty | two hundred and fifty | Large bending thickness (mm) | sixteen | sixteen | sixteen | sixteen | Larger processing size of vertical bending (mm) | 110*12 | 110*12 | 120*12 | 120*12 | Main motor power KW | four | 4 (3 pieces) | five point five | 5.5 (3 pieces) | Machine weight T | one point five | one point seven | one point nine | two point one | Can shearing, punching and folding work at the same time | no | can | no | can |
V Attached accessories: 1. 8 sets of punching dies. 2. A pair of shears. 3. Two sets of bending dies (R5, R10). 4. One set of embossing die. 5. One set of vertical bending die. 6. Three pairs of foot switches. 7. 2 relays. 8. 2 proximity switches. Note: The company is responsible for free delivery and debugging training |