Technical parameters of 50kw gasoline generator

Technical parameters of 50kw gasoline generator Mechanical noise of gasoline generator: if the mechanical noise is caused by the shock or mutual impact caused by the periodic change of gas pressure and motion inertia force of the moving parts of the starter during the operation, the following types of severe noise are involved: the noise of the piston crank connecting rod, the noise of the valve train, the noise of the transmission gear Mechanical disturbance and noise caused by unbalanced inertial force. The intense mechanical sensation of the gasoline generator set can spread through the foundation to the outdoor everywhere, and then form a noise through the radiation on the ground. This kind of structure noise spreads far and has attenuation reduction, which is difficult to isolate once it is formed.

Technical parameters of 50kw gasoline generator ① Always pay attention to the insulation function of electrical components and lines of small generators. In case of defects, the insulation monitoring indicator lights up. Carefully check the causes and remove them. If it drops due to moisture, the motor winding needs to be baked to recover its insulation function. Generally, external heating method or current passing method in the coil is used to make the moisture in the motor winding evaporate; Or start the unit and adopt the gradual loading method to gradually increase the current in the motor to expel moisture, so as to achieve the purpose of self drying. For units operating in wet areas, it is easy to use them frequently. If it is not necessary for a long time, the loading operation should be initiated for 1h every month to ensure that their insulation function is outstanding.
② The surface of metal parts in wet environment is easy to be corroded and rusted. It is necessary to pay attention to protect the paint coating well. If there is falling off and other phenomena, paint repair or grease protection shall be carried out in time. The touch surface of each moving part of the small generator shall adhere to the smooth oil layer. If the machine leader does not use it at any time, he/she shall manually pull the initiating equipment every week to make the crankshaft rotate and cover the surface of each conflicting part in the cylinder with smooth oil to achieve the anti-corrosion effect.