Gabelle KC600 waterproof coiled material

Product description: Cabernet's new liquid waterproof material comes into the market. Cabernet's KC600 liquid coiled material is a single component water-based environmental protection product, which is modified by a special process using high molecular polymer asphalt It is fully integrated. The waterproof film is black and shiny, high elastic, fast drying, and high solid content. It has strong adhesion with the concrete base course, good low temperature flexibility and high temperature sagging resistance, and has the waterproof effect of rubber coiled materials

Product characteristics: single component product, ready to use after opening, convenient and fast construction, can be applied by brush coating, roller coating, spraying and other construction methods, to meet customers' stringent construction requirements; Good waterproof performance, seamless connection, forming a complete waterproof film on the base layer, the dried film has good water resistance, and can be soaked in water for a long time; Good extensibility and low temperature flexibility, with an elongation of ≥ 600%, which can repair water leakage caused by micro cracks in the base course; High temperature sagging resistance, no flowing at ≥ 130 ℃; Strong adhesion, showing good adhesion on a variety of substrates; Relative tradition cement base Waterproof coating It has good compatibility with asphalt roll and ointment, and can be used in combination; Aquatic products, environmental protection, no toxic and harmful substances, no toxic substances released

Scope of application: kitchen, bathroom, floor roof, wall floor , swimming pool, drinking pool and other waterproof works; Building structures that may have slight cracks, vibrations and movements The Conduit , post cast strip, etc; Waterproofing of indoor and outdoor structures, prefabricated structures, brick walls, etc

Base surface treatment: the base surface must be stable, clean, flat, free of dust, oil stain, falling objects and other debris; The putty layer with loose or water-resistant base surface must be removed to the cement mortar plastering surface or the cast-in-place concrete layer; Obvious voids and sand holes must be filled and smoothed with cement mortar, and sharp edges should be removed; Before construction, the base surface shall be wetted with clean water until there is no open water;

Instructions for use: roll coating or spray coating can be used, and the film can be formed in two or three times. Each construction shall be carried out after the film formed in the previous construction is dry and not sticky. The coating shall be applied vertically and crosswise to prevent leakage. For special parts, internal and external corners, gutters, water pipes and other places, grid cloth can be laid on the surface to strengthen treatment; The coating construction of the protective layer shall be carried out after KC600 liquid coiled material is filmed and dried, and the surface shall be covered with protective treatment, which can be directly coated with cement mortar protective layer, or special weather resistant protective layer material can be used;

Normal dosage: apply two coats of paint with a thickness of about 1.5mm, about 10m2/18kg/barrel (the actual coating area depends on the specific base surface)

Precautions: roll coating or spray coating can be used to form the film in two or three times. Each construction shall be carried out after the film is dry and not sticky, and the coating shall be applied vertically and crosswise to prevent leakage. For special parts, internal and external corners, gutters, water pipes and other places, grid cloth can be laid on the surface to strengthen treatment; The coating construction of the protective layer shall be carried out after KC600 liquid coiled material is filmed and dried, and the surface shall be covered with protective treatment, which can be directly coated with cement mortar protective layer, or special weather resistant protective layer material can be used;

Storage method: Store in a ventilated and dry place at 5-35 ℃. The unopened product can be stored for 1 year

Packing specification: 18kg/barrel;

Executive standard: JGJ298 - 2013