Full automatic sensing water * * * NS-8301AC/DC
technical parameter
model | NS-8301AC/DC | Overall dimension | 160X130X160mm |
Power Supply | AC 220V 50Hz & DC 6V (Mains power 220V or 4 sections, No. 5 alkaline Battery ) | Place of Origin | Fuzhou |
Static power consumption | ≤60uA | pressure | 0.05-0.7Mpa |
Misidentification of time | 0.7 seconds | Sensing distance | 20±5CM |
Inlet and outlet pipe diameter | G(1/2)″ | service life | ≥ 500000 times |
Installation mode | Split installation | Service temperature | 1~45℃ |
Scope of application: hotels, restaurants, airports, stations, hospitals, office buildings, office buildings, * * * residential buildings, etc.
Product functions: water inlet filtration, induction water outlet, overtime washing protection, super waterproof, AC and DC universal.
Inductive water * * * - functional features
Water saving: reach out for water, stop for water, protect for 1 minute overtime, and the water saving effect is more than 70%.
Hygiene: The hand washing process is automatically completed without contacting water * * *, which can effectively avoid cross infection of bacteria.
Power saving: when DC products use 4 No. 5 batteries for power supply, if they are used 300 times a day, there is no need to replace the batteries within 2 years.
Power Supply Optional: Both AC and DC power supply modes can be selected for water * * *, and AC and DC power supply can also be used simultaneously.
Installation characteristics: the installation method is similar to that of non induction products, which can be installed by non professionals.
Weak current warning: when the voltage is less than 4.6V window Red indication lamp Flashes, prompting to replace the battery.
Convenient maintenance: filter screen is set inside, which can be easily cleaned by non professionals.
Remote control distance adjustment: the sensing distance can be adjusted through the optional remote control, which is convenient and fast.
Inductive water * * * - Precautions
1. Do not directly aim with water a sensor Flush to avoid damaging the machine, affecting the battery life and electric shock.
2. Non professional maintenance personnel are not allowed to disassemble, repair and refit the inductive water * * * to avoid affecting the product performance due to wrong maintenance;
3. Do not use corrosive chemical solvents to clean the shell of this product, so as to avoid damage and deformation of the appearance surface;
4. Please do not install the sensor in the place with high temperature, high humidity or corrosive gas to avoid shortening the service life of the sensing water * * *.
5. When using DC (battery) power supply products, please replace the battery in time when the induction window indicates low voltage.