Manufacturer pin CB middle buried rubber waterstop (with complete specifications and models), middle buried rubber waterstop, middle buried rubber waterstop and rubber waterstop are completely improved on the basis of traditional waterstop. Rubber waterstop can take advantage of the high elasticity and compression deformability of rubber itself to produce elastic deformation under various loads, thus effectively fastening and sealing, Prevent water leakage, seepage and shock absorption and buffer effect of building structure, thus improving construction/ expansion joint Waterproof safety factor of. If leakage occurs, it can be repaired effectively and quickly through grouting. The waterproof quality is reliable and does not recur. Its comprehensive cost is relatively economic, which completely solves the weakness of traditional waterstop. The rubber waterstop produced by Hengshui Zhongda Hengji Waterproof Material Factory is a new type of waterstop product; It adopts advanced waterproof concept and is widely used in Construction joint . The construction of deformation joint, bridge expansion joint and waterstop with the characteristics of detectability and grouting repair; This product can be applied to all underground waterproof and drainage structures, such as water retaining dam, reservoir, basement, etc. The major feature of the medium buried grouting waterstop is that it can be detected and repaired by grouting, which is also a major weakness of the traditional waterstop in the waterproof process. Even if the construction quality of the waterstop with good waterproof performance is not up to the standard during the construction of deformation joints and construction joints, water can still seep from the gap between the waterstop and the concrete, causing water leakage; In addition, poor joint quality of waterstop is also the main reason for water leakage of construction joints. The rubber waterstop products are made of domestic Yunnan natural standard rubber and imported synthetic rubber As the main raw material, and mixed with various auxiliary After plastic refining, mixing and pressing, many kinds and specifications of rubber waterstops are produced, including bridge type, mountain type, P type, U type, Z type, B type, T type, H type, E type and Q type It can also be classified into buried rubber waterstop and back stick rubber waterstop according to its use in the project. The material has good elasticity, abrasion resistance, aging resistance and tear resistance, strong adaptability to deformation, good waterproof performance, and the temperature application range is - 45 ℃ -+60 ℃. When the temperature exceeds 70 ℃, and is subject to strong oxidation or solvent erosion of agricultural production systems such as oil, rubber waterstop shall not be used The scope of application is applied to the waterproof of deformation joints of underground structures, dams, reservoirs, swimming pools, roofs and other building materials and structures. During the design of rubber waterstop products, the following factors should be taken into consideration: the products should be installed easily and kept in position; The waterstop shall be tightly and reliably combined with the concrete; Be able to detect the construction quality of the waterstop after completion; If the construction joint leaks water due to the quality of waterstop or construction quality, a second waterproof defense line shall be set, which can be repaired quickly, economically and effectively, and the waterproof quality after repair is reliable and durable.
